Ford Fiesta Mk6 bucket seat guide
2008 to 2017 (also numbered Mk7 in the UK), including ST180
The Fiesta generation introduced in 2008 has several ways to mount an aftermarket seat, including SW Motorsport lower bases, Sparco and OMP frames, Cobra assemblies, Planted brackets and RECARO base frames. The same car appears under Mk6 and Mk7 labels in fitting catalogues. Start with its build date and vehicle identity, then choose the seat and complete mounting assembly together.
This guide covers the 2008 to 2017 generation, including ST180 and ST200; some suppliers extend their application dates to 2018 or 2019, so match their exact vehicle description before ordering.
For the earlier ST150, use our 2002 to 2008 Fiesta guide. The later Fiesta guide covers the next generation. Send Garreth the year, body style and required seating side if the catalogue name leaves you unsure which car a frame describes.
- Vehicle identity: the Fiesta generation from 2008, including ST180 and ST200; keep the earlier ST150 and later Mk8 generation separate.
- Six fitting brands: Sparco, OMP, Cobra, Planted, SW Motorsport and RECARO; exact seat, vehicle and supplied parts need checking together.
- ST180 listings are separate shop order options. Their names alone do not establish a different floor layout or prove interchangeability.
- For a UK right-hand-drive car, the driver sits on the physical right. Planted DR means physical left in its manufacturer catalogue.
- Seat fixing pattern, runner contents, side supports and restraint installation each need checking; a seat approval does not approve the complete car installation.
Mounting: Fiesta from 2008
Choose the mounting route before ordering the seat. A vehicle frame connects to the floor, while a runner or side support adds another connection above it. Cameron can check the selected seat dimensions against that whole assembly, including driving position and clearance to the door, console and roof.
The frame listings below are alternatives with different interfaces and contents; buy the route specified for your exact seat and car.
Sparco single-frame and pair orders
The Sparco 00499109 listing has RHD driver and passenger selections, currently labelled 00499109DX and 00499109SX. Its shop base pattern is 345 x 271 mm; a side-mounted shell also needs appropriate side supports and matching fixings. Confirm whether a runner is included in the selected order.
The two-frame 00499109-X2 order is a quantity option for this generation. Its description also mentions the earlier 2002 to 2008 car, so use the exact supplied application to confirm the order and keep the two generations separate.
-
From £93.00 Incl. VATFrom £77.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
OMP HC891 frames
OMP HC891 has a shop choice of HC891D for the RHD driver and HC891S for the RHD passenger. The advertised base patterns are 345 x 271 mm and 405 x 290 mm. Those dimensions need comparing with the actual seat or runner; the wider pattern alone does not establish compatibility with a particular RECARO seat.
-
From £147.66 Incl. VATFrom £123.05 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Planted SB146 and physical seating side
Planted lists SB146 for Fiesta Mark VI, 2008 to 2019. Its manufacturer catalogue names SB146DR as left and SB146PA as right, viewed from the seated position. On a UK RHD Fiesta that makes SB146PA the driver side and SB146DR the passenger side, matching the shop selections.
Planted distinguishes Standard and Alternate slider patterns. Standard includes the RECARO pattern; Alternate substitutes the wide Cobra and Scheel-Mann pattern. Confirm which pattern the supplied bracket has before pairing it with a seat and rails.
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Cobra FRM-12 assembly
Cobra identifies the 2008 to 2017 B299/B409 Fiesta with SU-FOR-FIE-02L and SU-FOR-FIE-02R, using its FRM-12 assembly drawing. The shop listing is SU-FO-ESMK6 with driver, passenger and pair choices. Have Garreth confirm that the supplied kit matches the maker application and your seat model.
FRM-12 shows Premium runners and a seat-dependent belt bracket or spacer arrangement. The passenger assembly reverses the relevant bar and bracket positions and requires the appropriate left-handed belt bracket. Cobra gives 292 or 405 mm transverse positions with 330 mm fore-and-aft spacing, while the shop frame attribute says 291 x 330 mm; resolve that difference against the exact seat configuration before ordering.
SW Motorsport lower bases
SW Motorsport lists SW-SM-0053 for this generation, with the same base described for either seating side and sold per seat. The shop still asks you to select RHD driver or passenger. Side supports, sliders and installation fixings are separate; match any optional 8 or 10 mm shell supports to the actual seat.
The ST Mk7, Zetec S Mk7, ST180 and ST200 listings repeat SW-SM-0053 in their descriptions. These are model-specific order listings for the same stated supplier base family; check your vehicle and the complete package before ordering through one of them.
-
From £134.89 Incl. VATFrom £112.41 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
RECARO JA8 single-frame and pair orders
RECARO lists Fiesta JA8 from August 2008 with base frame 87.10.15 on the physical left and 87.10.25 on the right. The current single-frame shop choices are 871015-GSM for the RHD passenger and 871025 for the RHD driver. The 871015-X2 listing is the separate two-frame order option.
Match the exact RECARO seat version to its manufacturer application row. Base frames, manual rails and shell side supports are distinct parts: RECARO’s earlier JA8 fitting notes specify manual Track 7208800.1/2, so do not assume that the lower frame includes the required rail set. Confirm the current supplied parts for the chosen seat.
-
From £308.70 Incl. VATFrom £257.25 Excl. VATPayPal CreditKlarna ReadyGet notified This product has multiple variants. The options may be chosen on the product page
Sliding runners
The Endurance runner, Sparco 0049306 and Cobra Premium SUBFR07EL are separate product options. Compare fixing positions at both ends, the locking arrangement and the total assembled height before choosing one. A universal runner label does not establish a match to every Fiesta frame.
Use Cobra’s seat-specific assembly instructions for its Premium runners. For a competition installation, Cobra’s mounting guidance specifies side mounts without runners; confirm the intended use and exact seat assembly before ordering.
-
From £84.00 Incl. VATFrom £70.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Side supports
Sparco steel side supports connect a compatible side-mounted shell to the lower assembly, subject to its fixing positions and shell width. Cobra Nogaro supports SUBFR31 are the separate Nogaro-specific choice. Cameron can check support height and the seat’s clearance at the required driving position before the order is finalised.
Mounting: Fiesta ST180
Sparco, OMP, Planted and Cobra each have a separate ST180 shop listing. Their supplier-code families match those used in the general generation listings: 00499109, HC891, SB146 and Cobra’s Fiesta application. The ST180 suffix alone establishes neither a different floor geometry nor unrestricted interchange between orders.
Use the selected vehicle application and physical seating side to confirm the supplied part. The Planted ST180 choices retain SB146PA for the RHD driver and SB146DR for the RHD passenger; OMP uses D and S shop selections, while Sparco uses DX and SX. Cobra offers driver, passenger or pair choices through its listing.
SW Motorsport also has the ST180 and ST200 SW-SM-0053 listings described above.
-
From £93.00 Incl. VATFrom £77.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £143.52 Incl. VATFrom £119.60 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £224.95 Incl. VATFrom £187.46 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Seat and frame packages
The RECARO Pole Position ABE and Fiesta frame package is another order option to discuss with Garreth. Its title names two frames and a seat; confirm the seat quantity, correct handed frame pair, exact Pole Position ABE version, 7207450A side supports and required manual rails. Do not assume every part of the installation is included.
The Corbeau RRS and Fiesta Mk6 frame package needs its vehicle generation confirmed before it can be recommended for this car. Its Mk6 name does not resolve the year or supplier frame application. Ask for the actual supplied frame code and contents before placing that package against a 2008-generation Fiesta.
Competition bucket seats
For a fixed-back installation, start by comparing the Sparco Sprint and Cobra Monaco Pro if you want to consider base mounting. Both current listings describe base and side mounting, but their base patterns differ: Sprint is 345 x 271 mm and Monaco Pro is 292 x 330 mm. A frame matched to one pattern needs a separate check for the other.
OMP Champ-R and ARS-R, Mirco RTS-2 3D and RS2 3D, Sabelt GT3 and Sparco Evo L QRT are the side-mounted shell options shown here. Choose supports for the exact shell and lower assembly. Cameron can check shoulder width, harness openings and the room left around the controls, especially with a wider seat.
Check the approval label on the supplied seat and the rules for your event; its FIA label does not establish approval of the Fiesta frame, runner or complete installation.
-
From £252.00 Incl. VATFrom £210.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £400.80 Incl. VATFrom £334.00 Excl. VATPayPal Credit250+ coloursKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £425.40 Incl. VATFrom £354.50 Excl. VATPayPal Credit250+ coloursKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Reclining sport seats
A recliner needs enough room for its backrest movement as well as its base and runners. The Sparco R100 Vinyl, R100 Martini, R500 Fabric, R500 Sky and GT listings use a 345 x 271 mm shop base pattern. Compare that with the actual lower frame and selected rails.
Auto Style BS5 is listed at 345 x 280 mm, OMP RTS at 345 x 270 mm and Cobra Misano Anniversary Spec 2 at 291 x 330 mm. These figures differ from the common Sparco pattern. Confirm the exact supplied seat, runner contents and fixing positions before treating any of them as a direct combination.
OMP RTS is the reclining seat here; Mirco RTS-2 3D in the fixed-back section is a different product.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
£562.10Original price was: £562.10.£505.90Current price is: £505.90. Incl. VAT£468.42Original price was: £468.42.£421.58Current price is: £421.58. Excl. VATPayPal CreditKlarna ReadyAdd to basket -
From £461.00 Incl. VATFrom £384.17 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Roll cages
Safety Devices F167 is the bolt-in family for the manufacturer’s Fiesta Mk6/7, 2008 to 2019, three-door body without a sunroof. The maker specifies no interior trim and a front cage that penetrates the dashboard. Check those body and installation conditions before choosing the full cage or its rear components.
The single-door-bar and cross-door-bar versions are different orders. Rear products 235214, 235227 and 235249 are components for the relevant assembly, not complete six-point cages. Confirm the matching front, rear and door-bar parts as one specification.
Safety Devices describes F167 compliance with Motorsport UK regulations at publication, with national homologation only when it has approved the installation. Its F164 weld-in CDS family has MSUK/FIA homologation conditional on Safety Devices approving the installation. Have the maker confirm the exact assembly and intended event; no blanket approval applies to every cage card.
-
From £1,147.20 Incl. VATFrom £956.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £668.40 Incl. VATFrom £557.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,202.40 Incl. VATFrom £1,002.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,412.40 Incl. VATFrom £1,177.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Harnesses
TRS Clubman three-point and four-point belts, TRS Magnum four-point and six-point belts, Takata Drift II and Drift III, and Schroth Profi 3×2 are harness choices to assess with the seat and vehicle. The strap count does not establish that an existing belt anchorage or cage tube is suitable. Follow the selected belt maker’s installation instructions for anchor strength, strap angles and attachment hardware.
Cameron can help check whether the intended seat has the correct belt openings and whether the proposed shoulder, lap and crotch strap routes can be installed as specified. A harness bar or cage must itself be suitable for the attachment. Confirm the belt’s current approval and event requirements before ordering.
-
From £96.00 Incl. VATFrom £80.00 Excl. VATPayPal CreditAmazing valueSelect options This product has multiple variants. The options may be chosen on the product page
-
From £120.00 Incl. VATFrom £100.00 Excl. VATPayPal CreditAmazing valueSelect options This product has multiple variants. The options may be chosen on the product page
-
From £246.00 Incl. VATFrom £205.00 Excl. VATPayPal CreditAmazing valueSelect options This product has multiple variants. The options may be chosen on the product page
-
From £274.80 Incl. VATFrom £229.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £294.00 Incl. VATFrom £245.00 Excl. VATPayPal CreditAmazing valueSelect options This product has multiple variants. The options may be chosen on the product page
-
From £324.00 Incl. VATFrom £270.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £444.01 Incl. VATFrom £370.01 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
What fits
Compare the exact vehicle application and both fixing dimensions, then confirm the supplied parts for the selected seat.
| Route or seat | Interface | Side or contents | Check before ordering |
|---|---|---|---|
| Sparco 00499109 / ST180 / X2 | 345 x 271 mm shop base pattern | Single-side or two-frame order | Confirm actual application, runners and upper connections |
| OMP HC891 / ST180 | 345 x 271 or 405 x 290 mm shop patterns | D RHD driver / S RHD passenger | Wider pattern does not approve every RECARO seat |
| Planted SB146 / ST180 | Standard or Alternate slider pattern | PA physical right / DR physical left | Match supplied pattern, exact car and seat assembly |
| Cobra B299/B409 Fiesta | SU-FOR-FIE-02L/R; FRM-12 | Seat-dependent runner and belt-bracket assembly | Shop291 x330 differs from maker292/405 x330; confirm configuration |
| SW Motorsport Mk7 / ST180 / ST200 / Zetec S | SW-SM-0053 lower base | Per-seat order; side selection in shop | Side supports, sliders and installation fixings separate |
| RECARO JA8 | 87.10.15 left /87.10.25 right | Single-frame or pair listing | Exact seat version, manual rails and shell supports |
| Sparco Sprint fixed back | Base or side mount;345 x271 mm base | Selected supports and lower assembly | Approval label and cabin clearance still need checking |
| Cobra Monaco Pro fixed back | Base or side mount;292 x330 mm base | Cobra seat-specific configuration | Different base pattern from Sprint |
| Other fixed shells shown | Side mount | Supports matched to exact shell | Width, height, belt openings and controls |
| Sparco R100 /R500 /GT recliners | 345 x271 mm shop base pattern | Check required rails and hardware | Backrest movement and complete assembled height |
| Auto Style BS5 /OMP RTS recliners | 345 x280 /345 x270 mm shop patterns | Confirm supplied runner contents | Neither figure equals345 x271 mm |
| Cobra Misano Anniversary Spec2 | 291 x330 mm shop base pattern | Exact Cobra seat and fitting assembly | Confirm against maker drawing and supplied hardware |
Manufacturer application references: Cobra vehicle table, Cobra FRM-12 drawing, Cobra mounting guidance, Planted left SB146, Planted right SB146, RECARO seat and frame table, Safety Devices F167 and Safety Devices F164.
Common questions
Which Fiesta generation does this guide cover?
The generation introduced in 2008, including ST180 and ST200. This guide uses the 2008 to 2017 vehicle identity; some suppliers extend their dates to 2018 or 2019. Confirm their exact application against the car, keeping the earlier ST150 and later Mk8 generation separate.
Does an ST180 listing prove the floor is different?
A separate ST180 shop listing does not prove different floor mounting points; confirm the exact supplier application and supplied frame before deciding whether two order options are interchangeable.
Which SW Motorsport base covers ST180 and ST200?
Their current shop descriptions specify SW-SM-0053, also repeated in the ST Mk7 and Zetec S Mk7 listings; select the required side and confirm the complete assembly for your car.
Does the SW lower base include runners and side supports?
The description treats side supports, sliders and installation fixings as separate, so confirm those parts and the shell bolt size before ordering.
Which Planted bracket is the UK driver side?
SB146PA is physical right, which is the driver side of a UK RHD Fiesta; SB146DR is physical left and therefore the RHD passenger side.
What is the Planted Standard or Alternate pattern?
Standard includes the RECARO slider pattern, while Alternate substitutes the wide Cobra and Scheel-Mann pattern; confirm which version the supplied bracket has.
Which RECARO frame is left or right?
The JA8 application lists 87.10.15 left and 87.10.25 right, so the shop RHD passenger choice is 871015-GSM and its RHD driver choice is 871025.
Do RECARO base frames include the complete fitting system?
Check the exact seat version and order contents. Lower frames, manual rails and shell side supports are separate parts. Earlier RECARO JA8 notes specify manual Track 7208800.1/2, so the selected current assembly needs confirming.
Does the RECARO package contain two seats?
Its title names two frames plus a seat, so confirm the seat quantity, exact version, handed frame pair, supports and manual rails before ordering.
Can the Corbeau Mk6 package be assumed to fit?
Its year and actual supplied frame code need confirming because the Mk6 name alone does not distinguish the earlier and later Fiesta generations.
Can I use any 345 mm base-mounted recliner?
Compare both dimensions: the Sparco choices here are 345 x 271 mm, Auto Style BS5 is 345 x 280 mm and OMP RTS is listed at 345 x 270 mm.
Are Sparco Sprint and Cobra Monaco Pro the same base pattern?
Their current listings differ: Sprint is 345 x 271 mm and Monaco Pro is 292 x 330 mm; match the selected mounting method to the actual seat.
Which side supports are needed for a Nogaro?
Cobra Nogaro supports SUBFR31 are the Nogaro-specific option; check the exact seat, lower frame and complete Cobra assembly.
Can I add universal runners to any frame?
Check the fixing positions at both ends, lock operation, hardware and total height against the seat and vehicle; a universal description does not establish compatibility.
Will a wider fixed-back seat fit the Fiesta cabin?
Measure the actual shell at its shoulders and base against the door, console and required driving position, then check headroom and control clearance with the complete supports and frame.
Which body does the Safety Devices F167 cage cover?
The maker specifies the 2008 to 2019 Mk6/7 three-door Fiesta without a sunroof, with no interior trim and a front cage that penetrates the dashboard.
Is a rear cage product a complete six-point cage?
The rear-only listings are components of their matching cage design; confirm the required front assembly and door bars from the complete cage specification.
Are all these cages automatically FIA approved?
Approval depends on the precise design and installation. Safety Devices makes homologation conditional on its approval of the installation for the relevant F167 or F164 specification. Confirm the intended event with the maker.
Does a harness strap count decide its anchor points?
Use the belt maker's instructions for the actual seat and anchorage arrangement; three, four or six straps alone cannot establish a suitable installation.
What information should I send before ordering?
Send Garreth the year, body style, version, physical seating side, exact seat and quantity; Cameron can check the required frame, runners, supports and restraint arrangement from those details.
More help
Send Garreth the Fiesta’s year and body style, whether it is ST180, ST200 or another version, and the physical side you want to replace. Include the exact seat model and whether you need one seat or a pair. Cameron can then check the frame, rails, side supports and restraint arrangement against that specification.
Call 0115 647 8650 with the details or use the contact link below.
Need a personal recommendation?
We're here to ensure you pick the right seat.
Contact us today.





























