Two Sparco sub-frames for the Ford Fiesta Mk6 and Mk7, sold as a pair at part number 00499109-X2. The frames fit both the Mk6 (2002 to 2008) and Mk7 (2008 to 2017) Fiesta, covering the generation that spans the 2002 refresh through to the end of the Mk7 run.
Both sides are in this listing, which suits the most common scenario: fitting matching sport or bucket seats on the driver and passenger sides at the same time. If you only need a single frame for one side, the single-frame listing is the right one to order.
The frames use the 345mm x 271mm bolt pattern, shared across Sparco, OMP, and Corbeau base-mount seats. If you’re fitting seats from any of those three brands, this frame will accept them. They bolt to the factory seat mounting points without drilling, which keeps the installation reversible.
The Fiesta Mk6 and Mk7 frames are universally sided: both frames in this pair are the same part, so there’s no driver or passenger designation to worry about when ordering.
If you want the seat to move fore and aft once it’s in, you’ll need Sparco sliding runners between the frame and the seat, ordered separately at part number SS0049302-X2 for a pair. Without runners, the seat is fixed where the frame positions it.
Have you written anything useful for my car?
Yes: Top 5 reclining seat choices for your Ford Fiesta Mk6, including our fitting guide, and Top 5 reclining seat choices for your Ford Fiesta ST180, including our fitting guide. Those are written around the same car, from real fittings and customer questions, so they are worth a look before you decide.
Will this fit my car?
This frame is made for the Ford Fiesta Mk6/Mk7. Chassis code and years matter more than the badge, as floor pans change between generations, so if your car sits near a changeover year, send us the registration and we will confirm before you order.
Which seats does it take?
It takes seats drilled 345mm x 271mm (the Sparco and OMP seat pattern). The Compatible seats tab above lists what bolts straight on. If your seat is not listed, tell us what you run and we will confirm the fit.
Do I keep fore-and-aft adjustment?
Only with a sliding runner between the frame and the seat, which is a separate part on Sparco frames. If more than one person drives the car, budget for the runner. Our guide to sliding runners explains the options and widths.
Base mount or side mount, and does it matter?
This is a base-mount frame: the seat bolts down through its base, the simpler stack that suits seats with a flat bottom and keeps the install low-fuss. Our guide on base mount versus side mount explains the whole fitting stack.
Is this for the driver or passenger side?
Both sides are available on this listing, pick driver or passenger side at the point of order (sides listed are for right-hand-drive cars). Left-hand-drive car? Ask us, as the sides swap over and availability varies by model.
