Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Ford Fiesta Mk6 bucket seat guide

2008 to 2017 (also numbered Mk7 in the UK), including ST180

The Fiesta generation introduced in 2008 has several ways to mount an aftermarket seat, including SW Motorsport lower bases, Sparco and OMP frames, Cobra assemblies, Planted brackets and RECARO base frames. The same car appears under Mk6 and Mk7 labels in fitting catalogues. Start with its build date and vehicle identity, then choose the seat and complete mounting assembly together.

This guide covers the 2008 to 2017 generation, including ST180 and ST200; some suppliers extend their application dates to 2018 or 2019, so match their exact vehicle description before ordering.

For the earlier ST150, use our 2002 to 2008 Fiesta guide. The later Fiesta guide covers the next generation. Send Garreth the year, body style and required seating side if the catalogue name leaves you unsure which car a frame describes.

Ford Fiesta Mk6 on track with a helmeted driver
Ford Fiesta ST180 Mk6 on track

Mounting: Fiesta from 2008

Choose the mounting route before ordering the seat. A vehicle frame connects to the floor, while a runner or side support adds another connection above it. Cameron can check the selected seat dimensions against that whole assembly, including driving position and clearance to the door, console and roof.

The frame listings below are alternatives with different interfaces and contents; buy the route specified for your exact seat and car.

Sparco single-frame and pair orders

The Sparco 00499109 listing has RHD driver and passenger selections, currently labelled 00499109DX and 00499109SX. Its shop base pattern is 345 x 271 mm; a side-mounted shell also needs appropriate side supports and matching fixings. Confirm whether a runner is included in the selected order.

The two-frame 00499109-X2 order is a quantity option for this generation. Its description also mentions the earlier 2002 to 2008 car, so use the exact supplied application to confirm the order and keep the two generations separate.

OMP HC891 frames

OMP HC891 has a shop choice of HC891D for the RHD driver and HC891S for the RHD passenger. The advertised base patterns are 345 x 271 mm and 405 x 290 mm. Those dimensions need comparing with the actual seat or runner; the wider pattern alone does not establish compatibility with a particular RECARO seat.

Planted SB146 and physical seating side

Planted lists SB146 for Fiesta Mark VI, 2008 to 2019. Its manufacturer catalogue names SB146DR as left and SB146PA as right, viewed from the seated position. On a UK RHD Fiesta that makes SB146PA the driver side and SB146DR the passenger side, matching the shop selections.

Planted distinguishes Standard and Alternate slider patterns. Standard includes the RECARO pattern; Alternate substitutes the wide Cobra and Scheel-Mann pattern. Confirm which pattern the supplied bracket has before pairing it with a seat and rails.

Cobra FRM-12 assembly

Cobra identifies the 2008 to 2017 B299/B409 Fiesta with SU-FOR-FIE-02L and SU-FOR-FIE-02R, using its FRM-12 assembly drawing. The shop listing is SU-FO-ESMK6 with driver, passenger and pair choices. Have Garreth confirm that the supplied kit matches the maker application and your seat model.

FRM-12 shows Premium runners and a seat-dependent belt bracket or spacer arrangement. The passenger assembly reverses the relevant bar and bracket positions and requires the appropriate left-handed belt bracket. Cobra gives 292 or 405 mm transverse positions with 330 mm fore-and-aft spacing, while the shop frame attribute says 291 x 330 mm; resolve that difference against the exact seat configuration before ordering.

SW Motorsport lower bases

SW Motorsport lists SW-SM-0053 for this generation, with the same base described for either seating side and sold per seat. The shop still asks you to select RHD driver or passenger. Side supports, sliders and installation fixings are separate; match any optional 8 or 10 mm shell supports to the actual seat.

The ST Mk7, Zetec S Mk7, ST180 and ST200 listings repeat SW-SM-0053 in their descriptions. These are model-specific order listings for the same stated supplier base family; check your vehicle and the complete package before ordering through one of them.

RECARO JA8 single-frame and pair orders

RECARO lists Fiesta JA8 from August 2008 with base frame 87.10.15 on the physical left and 87.10.25 on the right. The current single-frame shop choices are 871015-GSM for the RHD passenger and 871025 for the RHD driver. The 871015-X2 listing is the separate two-frame order option.

Match the exact RECARO seat version to its manufacturer application row. Base frames, manual rails and shell side supports are distinct parts: RECARO’s earlier JA8 fitting notes specify manual Track 7208800.1/2, so do not assume that the lower frame includes the required rail set. Confirm the current supplied parts for the chosen seat.

Sliding runners

The Endurance runner, Sparco 0049306 and Cobra Premium SUBFR07EL are separate product options. Compare fixing positions at both ends, the locking arrangement and the total assembled height before choosing one. A universal runner label does not establish a match to every Fiesta frame.

Use Cobra’s seat-specific assembly instructions for its Premium runners. For a competition installation, Cobra’s mounting guidance specifies side mounts without runners; confirm the intended use and exact seat assembly before ordering.

Side supports

Sparco steel side supports connect a compatible side-mounted shell to the lower assembly, subject to its fixing positions and shell width. Cobra Nogaro supports SUBFR31 are the separate Nogaro-specific choice. Cameron can check support height and the seat’s clearance at the required driving position before the order is finalised.

Mounting: Fiesta ST180

Sparco, OMP, Planted and Cobra each have a separate ST180 shop listing. Their supplier-code families match those used in the general generation listings: 00499109, HC891, SB146 and Cobra’s Fiesta application. The ST180 suffix alone establishes neither a different floor geometry nor unrestricted interchange between orders.

Use the selected vehicle application and physical seating side to confirm the supplied part. The Planted ST180 choices retain SB146PA for the RHD driver and SB146DR for the RHD passenger; OMP uses D and S shop selections, while Sparco uses DX and SX. Cobra offers driver, passenger or pair choices through its listing.

SW Motorsport also has the ST180 and ST200 SW-SM-0053 listings described above.

Seat and frame packages

The RECARO Pole Position ABE and Fiesta frame package is another order option to discuss with Garreth. Its title names two frames and a seat; confirm the seat quantity, correct handed frame pair, exact Pole Position ABE version, 7207450A side supports and required manual rails. Do not assume every part of the installation is included.

The Corbeau RRS and Fiesta Mk6 frame package needs its vehicle generation confirmed before it can be recommended for this car. Its Mk6 name does not resolve the year or supplier frame application. Ask for the actual supplied frame code and contents before placing that package against a 2008-generation Fiesta.

Competition bucket seats

For a fixed-back installation, start by comparing the Sparco Sprint and Cobra Monaco Pro if you want to consider base mounting. Both current listings describe base and side mounting, but their base patterns differ: Sprint is 345 x 271 mm and Monaco Pro is 292 x 330 mm. A frame matched to one pattern needs a separate check for the other.

OMP Champ-R and ARS-R, Mirco RTS-2 3D and RS2 3D, Sabelt GT3 and Sparco Evo L QRT are the side-mounted shell options shown here. Choose supports for the exact shell and lower assembly. Cameron can check shoulder width, harness openings and the room left around the controls, especially with a wider seat.

Check the approval label on the supplied seat and the rules for your event; its FIA label does not establish approval of the Fiesta frame, runner or complete installation.

Reclining sport seats

A recliner needs enough room for its backrest movement as well as its base and runners. The Sparco R100 Vinyl, R100 Martini, R500 Fabric, R500 Sky and GT listings use a 345 x 271 mm shop base pattern. Compare that with the actual lower frame and selected rails.

Auto Style BS5 is listed at 345 x 280 mm, OMP RTS at 345 x 270 mm and Cobra Misano Anniversary Spec 2 at 291 x 330 mm. These figures differ from the common Sparco pattern. Confirm the exact supplied seat, runner contents and fixing positions before treating any of them as a direct combination.

OMP RTS is the reclining seat here; Mirco RTS-2 3D in the fixed-back section is a different product.

Roll cages

Safety Devices F167 is the bolt-in family for the manufacturer’s Fiesta Mk6/7, 2008 to 2019, three-door body without a sunroof. The maker specifies no interior trim and a front cage that penetrates the dashboard. Check those body and installation conditions before choosing the full cage or its rear components.

The single-door-bar and cross-door-bar versions are different orders. Rear products 235214, 235227 and 235249 are components for the relevant assembly, not complete six-point cages. Confirm the matching front, rear and door-bar parts as one specification.

Safety Devices describes F167 compliance with Motorsport UK regulations at publication, with national homologation only when it has approved the installation. Its F164 weld-in CDS family has MSUK/FIA homologation conditional on Safety Devices approving the installation. Have the maker confirm the exact assembly and intended event; no blanket approval applies to every cage card.

Harnesses

TRS Clubman three-point and four-point belts, TRS Magnum four-point and six-point belts, Takata Drift II and Drift III, and Schroth Profi 3×2 are harness choices to assess with the seat and vehicle. The strap count does not establish that an existing belt anchorage or cage tube is suitable. Follow the selected belt maker’s installation instructions for anchor strength, strap angles and attachment hardware.

Cameron can help check whether the intended seat has the correct belt openings and whether the proposed shoulder, lap and crotch strap routes can be installed as specified. A harness bar or cage must itself be suitable for the attachment. Confirm the belt’s current approval and event requirements before ordering.

What fits

Compare the exact vehicle application and both fixing dimensions, then confirm the supplied parts for the selected seat.

Route or seatInterfaceSide or contentsCheck before ordering
Sparco 00499109 / ST180 / X2345 x 271 mm shop base patternSingle-side or two-frame orderConfirm actual application, runners and upper connections
OMP HC891 / ST180345 x 271 or 405 x 290 mm shop patternsD RHD driver / S RHD passengerWider pattern does not approve every RECARO seat
Planted SB146 / ST180Standard or Alternate slider patternPA physical right / DR physical leftMatch supplied pattern, exact car and seat assembly
Cobra B299/B409 FiestaSU-FOR-FIE-02L/R; FRM-12Seat-dependent runner and belt-bracket assemblyShop291 x330 differs from maker292/405 x330; confirm configuration
SW Motorsport Mk7 / ST180 / ST200 / Zetec SSW-SM-0053 lower basePer-seat order; side selection in shopSide supports, sliders and installation fixings separate
RECARO JA887.10.15 left /87.10.25 rightSingle-frame or pair listingExact seat version, manual rails and shell supports
Sparco Sprint fixed backBase or side mount;345 x271 mm baseSelected supports and lower assemblyApproval label and cabin clearance still need checking
Cobra Monaco Pro fixed backBase or side mount;292 x330 mm baseCobra seat-specific configurationDifferent base pattern from Sprint
Other fixed shells shownSide mountSupports matched to exact shellWidth, height, belt openings and controls
Sparco R100 /R500 /GT recliners345 x271 mm shop base patternCheck required rails and hardwareBackrest movement and complete assembled height
Auto Style BS5 /OMP RTS recliners345 x280 /345 x270 mm shop patternsConfirm supplied runner contentsNeither figure equals345 x271 mm
Cobra Misano Anniversary Spec2291 x330 mm shop base patternExact Cobra seat and fitting assemblyConfirm against maker drawing and supplied hardware

Common questions

The generation introduced in 2008, including ST180 and ST200. This guide uses the 2008 to 2017 vehicle identity; some suppliers extend their dates to 2018 or 2019. Confirm their exact application against the car, keeping the earlier ST150 and later Mk8 generation separate.

A separate ST180 shop listing does not prove different floor mounting points; confirm the exact supplier application and supplied frame before deciding whether two order options are interchangeable.

Their current shop descriptions specify SW-SM-0053, also repeated in the ST Mk7 and Zetec S Mk7 listings; select the required side and confirm the complete assembly for your car.

The description treats side supports, sliders and installation fixings as separate, so confirm those parts and the shell bolt size before ordering.

SB146PA is physical right, which is the driver side of a UK RHD Fiesta; SB146DR is physical left and therefore the RHD passenger side.

Standard includes the RECARO slider pattern, while Alternate substitutes the wide Cobra and Scheel-Mann pattern; confirm which version the supplied bracket has.

The JA8 application lists 87.10.15 left and 87.10.25 right, so the shop RHD passenger choice is 871015-GSM and its RHD driver choice is 871025.

Check the exact seat version and order contents. Lower frames, manual rails and shell side supports are separate parts. Earlier RECARO JA8 notes specify manual Track 7208800.1/2, so the selected current assembly needs confirming.

Its title names two frames plus a seat, so confirm the seat quantity, exact version, handed frame pair, supports and manual rails before ordering.

Its year and actual supplied frame code need confirming because the Mk6 name alone does not distinguish the earlier and later Fiesta generations.

Compare both dimensions: the Sparco choices here are 345 x 271 mm, Auto Style BS5 is 345 x 280 mm and OMP RTS is listed at 345 x 270 mm.

Their current listings differ: Sprint is 345 x 271 mm and Monaco Pro is 292 x 330 mm; match the selected mounting method to the actual seat.

Cobra Nogaro supports SUBFR31 are the Nogaro-specific option; check the exact seat, lower frame and complete Cobra assembly.

Check the fixing positions at both ends, lock operation, hardware and total height against the seat and vehicle; a universal description does not establish compatibility.

Measure the actual shell at its shoulders and base against the door, console and required driving position, then check headroom and control clearance with the complete supports and frame.

The maker specifies the 2008 to 2019 Mk6/7 three-door Fiesta without a sunroof, with no interior trim and a front cage that penetrates the dashboard.

The rear-only listings are components of their matching cage design; confirm the required front assembly and door bars from the complete cage specification.

Approval depends on the precise design and installation. Safety Devices makes homologation conditional on its approval of the installation for the relevant F167 or F164 specification. Confirm the intended event with the maker.

Use the belt maker's instructions for the actual seat and anchorage arrangement; three, four or six straps alone cannot establish a suitable installation.

Send Garreth the year, body style, version, physical seating side, exact seat and quantity; Cameron can check the required frame, runners, supports and restraint arrangement from those details.

More help

Send Garreth the Fiesta’s year and body style, whether it is ST180, ST200 or another version, and the physical side you want to replace. Include the exact seat model and whether you need one seat or a pair. Cameron can then check the frame, rails, side supports and restraint arrangement against that specification.

Call 0115 647 8650 with the details or use the contact link below.

Need a personal recommendation?

We're here to ensure you pick the right seat. Contact us today.
Our showroom virtual walk through!
Have a walk around our showroom before you even buy your new seats. 
Our hands on experience, is what allows us to bring you our recommendations.
Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text