Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Top 5 reclining seat choices for your Porsche 996, including our fitting guide

The 996 is the 911 people actually drive. It was the car that dropped the air-cooled engine, borrowed its front end from the Boxster and got argued over by purists for most of two decades, and it is also the reason a six figure sum stopped being the entry price for 911 ownership. Values have moved on since, but the 996 has stayed what it always was: a proper daily 911 rather than a car kept under a cover, and a growing number of owners are taking that usability onto a circuit as well as a B road.

The factory seat was built for that first job, motorway miles between the UK and the Nurburgring in electric comfort, not for holding you still through a fast direction change twenty years later once the bolsters have gone soft. We sell three fitting frame routes for the 996, a Cobra direct fit subframe, an OMP subframe and a Planted Technology bracket, and between them they cover a proper spread of reclining seats without any guesswork about what actually bolts in.

  • Three frame routes listed for the 996: Cobra and OMP subframes and a Planted Technology bracket
  • The Cobra frame takes 291mm seats with its runner included, OMP takes 345mm, Planted takes any pattern with a matching runner
  • Every seat in this guide is listed as 4 point harness compatible
  • Every route bolts to the factory mounting points, no drilling on a standard floor
Red Porsche 996 generation 911 coupe cornering on a British race circuit
The 996. The frame you pick decides which of the five seats below can go in it.

The three frame routes into a Porsche 996

We sell a fitting frame for the 996 from three brands, and between them they cover every seat in this guide. A frame is the vehicle-specific base that bolts to the floor in place of the standard runners, and it sets your final seat height. There is no Sparco subframe listed for this chassis, but the OMP subframe is drilled for the same 345mm x 271mm pattern, so a Sparco seat reaches the car through the OMP subframe or the Planted bracket. Which frame you buy decides which seats you can run, so this choice comes first.

291

Cobra subframe

Part Cob-Porsche-996, £255.00 inc VAT, priced for one subframe and fits one seat, with the sliding runner included in the price. Cobra recommend using it with Cobra-brand seats, and ask you to confirm which seat is going on it at checkout. Takes the Daytona and the Corbeau Sportline RRS Low Base.

345

OMP subframe

Part HC859, £110.81 inc VAT a side, handed RHD driver or passenger. A base mount frame listed for the 996 and 997, drilled for the 345mm x 271mm pattern, so it takes the SPR, the SPX and the Corbeau. Runners are extra, and side mounts can be added later if you ever move to a side mount seat. Seat height is tight in a 911, so tell us your own height when you order.

ANY

Planted bracket

Part SB017, £222.60 inc VAT a side, RHD driver and passenger. Listed under a shared bracket that also covers the Boxster, 997, Cayman and 991, so it takes any seat in this guide paired with the right runner.

The number that decides it

Every reclining seat we sell bolts down through a base mount pattern, and on this car there are three that matter. Cobra recliners use 291mm x 330mm, which is what the Cobra subframe is built around, and it is not compatible with a seat made by anyone else without adaptors. Sparco recliners use a different pattern again, 345mm x 271mm. There is no Sparco subframe for the 996, but the OMP subframe is drilled for that pattern, so the SPR and SPX go on the OMP subframe or the Planted bracket, with a Sparco runner kit either way. The Recaro Sportster CS uses its own wider 405mm x 290mm pattern and is Planted-only on this car. The Corbeau Sportline RRS Low Base is drilled for both 291mm and 345mm, which is why it bolts to all three frames.

SeatBolt patternCobra subframeOMP subframePlanted bracket
Cobra Daytona291 x 330FitsNoFits
Corbeau Sportline RRS Low Base291 or 345FitsFitsFits
Recaro Sportster CS405 x 290NoNoFits
Sparco SPR345 x 271NoFitsFits
Sparco SPX345 x 271NoFitsFits
Pick the seat firstThen buy the frame route that matches its pattern. The Corbeau keeps every route open. If you already know you want the Recaro, go straight for the Planted bracket; for one of the Sparcos, it is the OMP subframe or the Planted bracket. My job at GSM is working out exactly this combination for a given car and driver, so if you are stuck between two, drop us an email or click to open a chat.

Cobra Daytona: the everyday value pick

The Daytona is where most 996 owners start, and on the car’s own Cobra subframe it is about as straightforward as this upgrade gets: same brand seat, same brand frame, no pattern to double check. The bolsters at the shoulders and thighs sit deeper than a factory 996 seat ever did, so your body stays put mid-corner without the seat feeling like a cage to climb into for a road trip. It is built to order through Cobra’s Signature range, so trim, stitching, heating and lumbar are all yours to choose.

  • £599.00 inc VAT, built to order in your trim
  • 32 to 38 inch waists, all heights, 13.5kg
  • Signature trim options, plus optional heating and lumbar
  • Harness slots, listed 4 point compatible
  • 291mm x 330mm pattern: Cobra subframe with its runner included, or Planted bracket

Corbeau Sportline RRS Low Base: keeps every route open

The RRS Low Base is the seat to pick if you have not settled on a frame yet, or if you want the extra headroom the Low Base version buys back under a coupe roofline. It is drilled for both 291mm and 345mm, so it bolts to the Cobra subframe, the OMP subframe and the Planted bracket, the only seat in this guide that keeps every route open. The backrest is Corbeau’s sculpted shape, not the smoother SVR profile, worth knowing if you have sat in both before deciding.

  • £498.00 inc VAT
  • 32 to 38 inch waists, all heights
  • Listed 4 point compatible
  • Low Base version, useful for headroom under a coupe roofline
  • Drilled for both patterns: fits all three frames

Recaro Sportster CS: the best all-rounder

The Sportster CS holds you through the shoulders and thighs without the aggressive squeeze of a full bucket, so it stays comfortable on the drive to the circuit as well as on it, which suits a car that is still someone’s daily 911 as often as it is a trackday toy. Recaro list it as suitable for all waist sizes and all heights, rare for a seat with this much support, and the heated version is worth the extra if the 996 is still doing winter miles. It is a 405mm base mount, wider than either Cobra pattern, so it goes on the Planted bracket with a Recaro-compatible runner, not the Cobra subframe.

  • From £1,581.30 inc VAT, £2,154.60 with heating
  • All waist sizes, all heights
  • Leather and suede trim, heated option available
  • Harness slots, listed 4 point compatible
  • 405mm x 290mm pattern: Planted bracket with a Recaro-compatible runner

Sparco SPR: bucket support that still reclines

The SPR is the seat I point people at once a 996 starts doing more track days than road miles. Almost every recliner is a tubular steel frame with foam built up over it. The SPR starts from a moulded fibreglass shell, the way a competition bucket is made, and then adds the recline mechanism, so the sides hold their shape through a long fast corner and you still get a seat you can drop back at the services on the way home. Sparco list it for all waist sizes and all heights, which is unusual for a shell seat. It has no head support wings, so if the car is doing regular track days, plan a harness bar or cage behind it. There is no Sparco subframe for this chassis, so on the 996 it goes on the OMP subframe or the Planted bracket, with the Sparco runner kit either way.

  • £1,858.94 inc VAT, sold per seat
  • All waist sizes, all heights
  • Fibreglass shell, black vinyl and suede trim
  • Listed 4 point compatible, no head support wings
  • 345mm x 271mm pattern: OMP subframe or Planted bracket, plus the Sparco runner kit

Sparco SPX: the carbon flagship

The SPX is the seat for a 996 that is staying in the family. Sparco build it with a carbon fibre backrest and a composite lower section, to the same specification they supply to car manufacturers, so the shell itself does the holding, not a thick layer of foam. It is a road and track seat with no FIA homologation, and like the SPR it has no head support wings, so on a car that sees the circuit it wants a harness bar or cage behind it. Sparco list it for 32 to 38 inch waists and all heights. It is handed, so choose the driver or passenger side and order twice for a pair, and it goes on the same frames and Sparco runner kit as the SPR.

  • £2,815.79 inc VAT a side, handed driver or passenger
  • 32 to 38 inch waists, all heights
  • Carbon fibre backrest, composite base, grey and black trim
  • Listed 4 point compatible, no head support wings
  • 345mm x 271mm pattern: OMP subframe or Planted bracket, plus the Sparco runner kit

Getting it bolted down

All three frames bolt to the 996’s factory seat mounting points, so there is no drilling on a standard floor. Torque the floor bolts properly and check seat belt buckle clearance before you drive, because a sport seat often sits the buckle somewhere new. The Cobra subframe comes with its sliding runner in the price. The OMP subframe and the Planted bracket do not, so on those you add a runner kit that matches the seat’s pattern. All three frames are priced per seat, so a pair of seats means adding the frame to the basket twice.

Your seatRunners to orderWorks on
Cobra DaytonaNothing extra on the Cobra subframe, the runner comes with it. On the Planted bracket, Cobra Premium sliding runners, £84.00 a seatCobra subframe or Planted bracket
Corbeau Sportline RRS Low BaseNothing extra on the Cobra subframe. On the OMP subframe or the Planted bracket, Corbeau 345mm sliding runners, £117.60 a pairCobra subframe, OMP subframe or Planted bracket
Recaro Sportster CSEndurance Recaro-compatible runner kit, £95.04 a seatPlanted bracket only
Sparco SPR or SPXSparco sliding runner kit, £78.00 a pairOMP subframe or Planted bracket

The 996 covers the 911 built from 1997 to 2004, in Carrera, Carrera 4, Turbo, GT2 and GT3 form, before the 997 replaced it. All three frames in this guide are listed for the 996, so if you are on a Turbo or GT3 with a different factory floor, tell us the exact spec when you order and we will confirm fitment before it ships.

The five compared

SeatBolt patternWaistHeightWeightPrice inc VAT
Cobra Daytona291 x 33032 to 38inAll heights13.5kgFrom £599.00
Corbeau Sportline RRS Low Base291 or 34532 to 38inAll heightsNot published£498.00
Recaro Sportster CS405 x 290All sizesAll heightsNot publishedFrom £1,581.30
Sparco SPR345 x 271All sizesAll heightsNot published£1,858.94
Sparco SPX345 x 27132 to 38inAll heightsNot published£2,815.79

Prices include VAT and were correct on 30 September 2026. Where a weight says not published, the manufacturer does not give one and we will not guess it. Waist and height figures are the manufacturers’ published fitment ranges; if you are on a boundary, drop us an email or click to open a chat before ordering.

Common questions

Do I need to drill the floor of my 996?

Not on a standard floor. All three frames bolt to the factory seat mounting points. Torque the floor bolts properly and check the seat belt buckle clearance before you drive, because a sport seat often sits the buckle somewhere new.

Can I put a Sparco or Recaro seat on the Cobra subframe?

No. The Cobra subframe is built around the 291mm x 330mm pattern and Cobra recommend using it with Cobra seats. The Sparco SPR and SPX use 345mm x 271mm, so they go on the OMP subframe or the Planted bracket with a Sparco runner kit. The Recaro Sportster CS uses 405mm x 290mm and goes on the Planted bracket with its own runner. The Corbeau Sportline RRS Low Base is the exception, drilled for both 291mm and 345mm.

Will these seats take a 4 point harness?

Every seat in this guide is listed by its manufacturer as 4 point compatible, with belt slots in the backrest. The Sparco SPR and SPX have no head support wings, so on a car doing regular track days they want a harness bar or cage behind them. If you are planning harnesses, tell us when you order and we will make sure the whole setup works together.

Why is each frame priced per seat, and which ones include runners?

The Cobra subframe is sold as one unit that fits one seat, with its sliding runner included, and Cobra ask you to confirm which seat is going on it at checkout so fitment is correct. The OMP subframe and the Planted bracket are both listed with RHD driver and passenger side options, and neither includes runners, so add the kit that matches your seat. Either way, a pair of seats means two frames in the basket. If anything on a listing is unclear, drop us an email or click to open a chat before ordering.

Is this the same as your classic Porsche 911 guide?

No. Our classic Porsche 911 guide covers the air-cooled cars built from 1966 to 1998, where a period-correct seat like the Corbeau Sportsman genuinely suits the car. The 996 is water-cooled, ran to 2004, and gets used as a daily 911 far more than it sits under a cover, so we have not put the Sportsman in this guide. The five seats above are the ones we think actually suit how a 996 gets driven now.

What I would actually buy

If it were my money: the Daytona on the Cobra subframe for most road-and-occasional-track 996s, because it is the straightforward same-brand fit, the runner comes with the frame, and it does most of the job for sensible money. The RRS Low Base if you have not decided on a frame yet or you want the extra headroom under the roofline, since it fits all three frames. The Sportster CS if the car is still doing daily duty as much as track days and you want the best all-round support seat in the lineup. The SPR once track days start outweighing road miles, because the fibreglass shell holds you like a bucket and still reclines for the drive home, on the OMP subframe or the Planted bracket. And the SPX if the 996 is a keeper and you want Sparco’s carbon shell in it, with a harness bar or cage behind it if it goes on track.

Every combination above uses parts that bolt to the 996’s factory mounting points. If you are between two of these seats, or between sizes, ring the showroom on 0115 647 8650 with your height and waist measurement and we will talk it through before you spend anything.

Got a question about the equipment we sell?

Ask us anything. If it helps other drivers, we’ll turn your question into a full blog guide and share the answer on our site.

Why Choose Garreth And Cameron At GSM Performance?

We listen to every customer, continually refine the advice we give based on real feedback, and only supply parts we trust to deliver the results you need.
Our showroom virtual walk through!
Have a walk around our showroom before you even buy your new seats. 
Our hands on experience, is what allows us to bring you our recommendations.

Need a personal recommendation?

We're here to ensure you pick the right seat. Contact us today.
Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text