Reclining Seats For A Ford Escort Mk2: Which Suit A 40 Inch Waist And A 4 Point Harness
A customer asked us which reclining bucket seats fit a Ford Escort Mk2 with a 4 point harness for a driver with a 40 inch waist. No reclining seat we list states a 40 inch waist, and the widest ranges say 36 to 38 inches. By measurement the widest shell is the Cobra Daytona at 580mm, and four Corbeau Sportline pairs are listed against the Escort Mk2.
- Prices read from the live site, inc VAT
- All five list 4 point harness compatibility
- Every waist range quoted is the one printed on the product listing

No listing names a 40 inch waist, so we start with the Cobra Daytona
£599inc VAT
Every waist range on this page is the one printed on the product listing.
- Widest shell: the Cobra Daytona, 580mm across on a 530mm base, priced per seat
- Four Corbeau Sportline pairs are listed against the Escort Mk2: PSR, VLS, RRS and SVR
- All five list 4 point harness compatibility
- The widest waist range on any of them is 36 to 38 inches, so send us your height and waist
What a 40 inch waist means for the choice
We read the waist range on every reclining listing that carries an Escort Mk2 tag, plus the widest recliner we sell. The Corbeau Sportline listings and the Cobra Daytona each show two ranges, 32 to 36 inches and 36 to 38 inches. None shows 40. That’s as far as the makers’ own figures go, and we won’t stretch them.
Garreth: “For a 40 inch waist I’d start with the widest shell, and on the listings that’s the Daytona at 580mm across.” Cameron agrees on the seat and adds a check before the order. “I wouldn’t buy it blind. The Mk2 is a narrow car, and a seat that’s right for you can still be wrong for the gap it has to sit in.”
Five reclining seats for the Escort Mk2
Widest shell
Cobra Daytona Reclining Sport Seat
£599from, inc VAT
- 580mm across, 530mm base
- Four point harness facility
- Priced per seat
Lowest price pair
Corbeau PSR Reclining Sport Seat (Pair)
£598.80inc VAT
- Black cloth, no head support
- Listed against the Escort Mk2
- Optional double locking runners
Most relaxed shape
Corbeau Sportline RRS pair, white stitching
£984inc VAT
- Black vinyl, integrated headrest
- Listed against the Escort Mk2
- Pair listing
Plainest vinyl pair
Corbeau VLS Vinyl Reclining Sport Seats
£980.40inc VAT
- Black vinyl, no head support
- Listed against the Escort Mk2
- Pair listing
Most sculpted
Corbeau SVR Vinyl Reclining Sport Seats
£1,020inc VAT
- Black vinyl, no head support
- Listed against the Escort Mk2
- Pair listing
| Product | Waist ranges listed | Harness | Bolt pattern | Price inc VAT |
|---|---|---|---|---|
| Cobra Daytona Reclining Sport Seat | 36" - 38" Waist / 32" - 36" waist | 4 point compatible | 291mm x 330mm | From £599 |
| Corbeau PSR Reclining Sport Seat (PAIR) | 36" - 38" Waist / 32" - 36" waist | 4 point compatible | 291mm x 330mm / 345mm x 271mm | £598.80 |
| 2 Corbeau Sportline RRS Reclining Sport Seats With White Stitching | 36" - 38" Waist / 32" - 36" waist | 4 point compatible | 291mm x 330mm / 345mm x 271mm | £984 |
| 2 Corbeau VLS Vinyl Reclining Sport Seats | 36" - 38" Waist / 32" - 36" waist | 4 point compatible | 291mm x 330mm / 345mm x 271mm | £980.40 |
| 2 Corbeau SVR Vinyl Reclining Sport Seats | 36" - 38" Waist / 32" - 36" waist | 4 point compatible | 291mm x 330mm / 345mm x 271mm | £1,020 |
The Daytona is priced per seat and the four Corbeau listings are pairs. Where a listing has options the price shown is the lowest. Prices include VAT and were read from the live site.
1. Cobra Daytona: the widest shell
The Daytona is the widest recliner Cobra make, 580mm across against 540mm for the Le Mans, on a 530mm base. It’s 865mm tall, 620mm deep and weighs 13.5kg. The listing describes deep side bolsters, an orthopaedic backrest and lumbar support, so it holds you better than the width alone would suggest.
Harness wise it has a four point facility, with a single slot through the integral head pad. Garreth’s tip is to put a 40 inch driver in this one first. The catch is the 530mm base. Nothing else on this page is that wide at the bottom, and it’s the figure Cameron wants checked against the car before anything is ordered.
It’s hand trimmed in the UK, and the colours are confirmed with you before the seat is built. Timings are on the product page. It’s seat only, and Cobra frames include the sliding runner in the price.
- Priced per seat, inc VAT
- 580mm wide, 530mm base, 865mm tall, 620mm deep
- Four point harness facility, one slot through the head pad
- Base mount, 291mm x 330mm bolt pattern
- Waist ranges listed: 32 to 36 and 36 to 38 inches
-
From £599.00 Incl. VATFrom £499.17 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Product cards show prices excluding VAT. Prices in the text include VAT.
2. Corbeau PSR: the lowest price pair
The PSR is a steel frame reclining seat in black cloth, sold as a pair. It has no head support. The listing shows it as 4 point compatible and tagged against the Escort Mk2.
It’s the lowest price of the four Corbeau pairs here. Options on the pair are double locking seat runners, heated seats and an inflatable lumbar support. The listing says the double locking runners are worth having if the car sees any track use.
We have photos of a pair in a customer’s Escort Mk1 below. Corbeau give no width in millimetres on this listing, only the waist ranges, so if you’re a broader driver ask us before you buy this one.
- Pair, inc VAT
- Black cloth, no head support, black stitching
- 4 point compatible, base mount
- Bolt patterns listed: 291mm x 330mm and 345mm x 271mm
- Waist ranges listed: 32 to 36 and 36 to 38 inches
3. Corbeau Sportline RRS: the most relaxed shape
This is the RRS pair in black vinyl with white stitching. It has an integrated headrest, and it’s the only one of the four Corbeau pairs whose listing shows one. White stitching costs the same as black on this seat, so pick whichever you like the look of.
The SVR listing compares the three Sportline shells: the SVR the most sculpted through the sides, the RRB the most upright and the RRS the most relaxed. For a driver at the wide end, Cameron’s fitting view is to try the RRS before the SVR on that description alone, with the driver sat in it before it goes near the car.
- Pair, inc VAT
- Black vinyl, white stitching, integrated headrest
- 4 point compatible, base mount
- Listed against the Escort Mk2
- Waist ranges listed: 32 to 36 and 36 to 38 inches
4. Corbeau VLS: the plain vinyl pair
The VLS pair is black vinyl with black stitching and no head support. This listing is the standard base. The description says Corbeau also list the VLS on a low base at the same price, which drops the seating position and matters if you’re tall or wear a helmet. It’s 4 point compatible and tagged against the Escort Mk2.
Of the four Corbeau pairs it’s the one with least to say for it, and it does the job without options or any fuss over trim.
- Pair, inc VAT
- Black vinyl, black stitching, no head support
- 4 point compatible, base mount
- Listed against the Escort Mk2
- Waist ranges listed: 32 to 36 and 36 to 38 inches
-
£1,032.00Original price was: £1,032.00.£980.40Current price is: £980.40. Incl. VAT£860.00Original price was: £860.00.£817.00Current price is: £817.00. Excl. VATPayPal CreditKlarna ReadySpeed+ ServiceAdd to basket
5. Corbeau SVR: the most sculpted
According to its own listing, the SVR is the most sculpted of the Sportline shells through the sides, which is good for hold in a corner and less good when your waist is at the top of the range.
The pair is black vinyl with black stitching and no head support. It’s 4 point compatible and tagged against the Escort Mk2, and the listing says it tilts for rear access and reclines. Garreth’s tip is that it suits a driver who’s nearer 34 inches than 40.
- Pair, inc VAT
- Black vinyl, black stitching, no head support
- 4 point compatible, base mount
- Listed against the Escort Mk2
- Waist ranges listed: 32 to 36 and 36 to 38 inches


Fitting reclining seats in a Mk2
We found no seat frame listed for the Mk2 specifically, so a reclining seat goes in on a universal frame or a fabricated base. The Corbeau Le-Universal frame is the one we would look at for the Sportline pairs. The listing says it is for cars Corbeau do not list, that it suits the Sportline reclining range, and that you get one frame and a pair of double locking runners for a single seat. It is priced per frame, so a driver and passenger set is two, which comes to £432.00.
How a universal frame goes in depends on the floor. Send us the car, the seat and anything that has been done underneath before you order. For the Daytona, tell us and we will confirm the right frame for that seat.
Measure the gap
Door card to tunnel at hip height, with the trim on, and the same again at shoulder height. Hold both figures against the seat's width and base before you look at anything else. A tape measure and ten minutes is enough.
Check the cage
If the car has a cage, the door bars and harness bar change where a seat can sit, and our Escort roll cage guide lists the kits.
Pick the base
All five are base mount, so they need a frame or a fabricated base. The Corbeau universal frame is £216.00 a side. Tell us the seat and we'll confirm the rest.
Choose the belts
Bolt in or clip in decides the anchor points, and the next section has three 4 point belts.
If you are unsure what your car has underneath, drop us an email or click to open a chat with the car and the seat you are looking at.
4 point harnesses for a reclining seat
All five seats list 4 point harness compatibility. The Daytona adds a single slot through the integral head pad. Tell us the belt you have in mind and we will check the routing suits the seat.
Three 4 point belts we list: the Sparco bolt-in pair at £194.40, the Sabelt clip-in pair at £240.00, and the Luke Pro-Lite from £180.00. The Sparco is Road and Track approved, not HANS compatible, and needs proper anchor points. The Sabelt clip-in threads the shoulder straps round a crossbar or harness bar behind the seat. The Luke has a quick release buckle and comes in 50mm or 75mm webbing. The difference between road and FIA belts is in our belts guide.
-
From £180.00 Incl. VATFrom £150.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
If a reclining seat is too narrow
A fixed back is the other route for a broader driver. The Mirco RTX-7 is about 600mm across the shoulders and its listing shows a 32 to 36 inch waist. We know it fits a Mk2 because a customer fitted a pair with fabricated frames and side mounts, and it clears the cage door bars. It is a different kind of seat, with side mounts and no recline, and the fitted guide shows how it went in.
Common questions
Which reclining seat is widest for a larger driver?
On the listings it is the Cobra Daytona, 580mm across on a 530mm base.
Does any of these list a 40 inch waist?
No. The widest range on the Corbeau and Cobra listings is 36 to 38 inches, and a range on a listing is only a guide. Send us your height and waist and we’ll tell you straight whether we’d try one.
Will a 4 point harness work with a reclining seat?
All five list 4 point compatibility. The Daytona has a single slot through its head pad, though, so tell us the belt and we’ll check the routing before you order.
Is there a direct fit frame for the Escort Mk2?
We found none listed. The Corbeau Le-Universal frame is £216.00 a side and includes double locking runners. A pair of seats needs two frames.
Can I fit these with a roll cage in the car?
Door bars and the harness bar change where a seat can sit. Tell us the cage make and we will say what to measure. Our Escort roll cage guide lists the kits.
Can I buy one seat instead of a pair?
The four Corbeau listings here are pairs and the Daytona is priced per seat, so check the product page or ask us about a single.
What we would buy
Garreth
Garreth's top tip
For a 40 inch waist I'd take the Cobra Daytona. It's the widest shell we list and it has the four point facility, and width is the whole problem here.
If the Daytona does not fit the gap, I would try the Corbeau RRS pair, because Corbeau describe it as the most relaxed shape, and I would buy it only after we had talked it through.
Cameron
Cameron's fitting view
I wouldn't order any of them until I've got the door card to tunnel gap, the waist and the height. The Daytona's 530mm base is the number I'd hold against the car, and I'd want it on paper before the seat is built.
On the order: the Daytona is the seat, and I'll measure it against the car with you before anything is ordered. Either way, bring me the cage make if there is one.
Not sure a seat will fit your Mk2?
Tell us your height, your waist and what the car has inside. Cally, our digital receptionist, takes your details, and Cameron comes back to you with the seat and frame before you order.







