Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Fitting Cobra Stuttgart reclining seats in your classic Mini

Can I fit Cobra Stuttgart reclining seats in my classic Mini? Mini owners ask us this a lot, and yes, it is one of the simplest seat swaps we do. The Stuttgart is Cobra's slimmest recliner, it bolts to Cobra's own Mini frame on the same 291mm by 330mm pattern, and the frame picks up the holes the factory already put in the floor.

  • Seat sizes, options and prices checked against our live Cobra listings on 16 November 2026, inc VAT
  • Frame details from Cobra's own drawing of the locking Mini subframe
  • Cameron checks the year of your Mini and the frame before anything is ordered
Looking in through the side window of a green classic Mini at a pair of Cobra Stuttgart reclining seats in black leather with suede centres, headrests and the recline hand wheel
Cobra Stuttgart recliners in a green classic Mini.
The short answer

Cobra Stuttgart Vinyl Reclining Sport Seat

£619from, inc VAT, one seat

Yes, the Stuttgart fits the classic Mini on Cobra's Mini frame. Pick the trim you want, then add the locking Mini frame for each side, which is the one we recommend.

  • 520mm wide and 530mm deep, Cobra's slimmest recliner
  • Base mount on the 291mm x 330mm pattern the Mini frame takes
  • Hand wheel recline and a headrest included
  • Vinyl, leather, Signature colours or tartan
520mmStuttgart width
530mmStuttgart depth, front to back
291 x 330Bolt pattern, seat and frame, mm
£107.40Locking Mini frame, one side, inc VAT

Why the Stuttgart suits a classic Mini

A classic Mini has very little room between the pedals and the rear seat, and the door sits close to your shoulder. Most reclining seats are too deep or too wide for it. The Stuttgart is shallower front to back than almost any other Cobra seat, and the narrowest recliner they make, so it fits where others do not.

That is why Garreth points Mini owners at the Stuttgart when they want a reclining seat with a headrest. It keeps the period look, with a separate rounded headrest on two posts and piped edges, and the backrest sets to suit you on a long drive.

DimensionCobra Stuttgart
Overall height, with headrest800mm
Backrest height, without headrest640mm
Width across the backrest520mm
Width at the base500mm
Depth, front to back530mm
Headrest width260mm
Base bolt pattern291mm x 330mm
Weight13.2kg
Waist sizes32 to 36 inch, or 36 to 38 inch

From the Stuttgart listings and Cobra's dimension drawing, read on 16 November 2026. Every car-fit Stuttgart shares these sizes; only the trim changes.

Cobra's Stuttgart drawing, and the seat itself

Pick your Stuttgart: four ways to trim it

Every car-fit Stuttgart is the same seat underneath, with the same frame, recline and sizes. Only the trim changes, and Cobra offer more trims on this seat than on any of their other road seats. Choose the listing first, then the trim, waist size and any extras on that listing.

Cameron’s advice for a Mini is to think about how the car is used. Vinyl wipes clean and suits a daily driver, leather ages well in a restored car, and a corduroy, houndstooth or tartan centre gives you some grip where full vinyl or leather lets you slide.

Our pick for most Minis

Vinyl

Cobra Stuttgart Vinyl

£619from, inc VAT

  • Black vinyl all over, or vinyl outers with basketweave, corduroy, houndstooth or tartan centres
  • Hard wearing and easy to clean
  • Headrest included
See the Vinyl Stuttgart →

Signature

Cobra Stuttgart Signature

£709from, inc VAT

  • Your own one or two colours
  • Spacer fabric, soft grain vinyl, leather, or leather and Dinamica
  • Seat heater and lumbar support available
See the Signature Stuttgart →

Leather

Cobra Stuttgart Leather

£879from, inc VAT

  • Black leather all over, or leather facings with a vinyl back
  • Leather outers with corduroy, houndstooth or tartan centres
  • Headrest included
See the Leather Stuttgart →

Tartan Edition

Cobra Stuttgart Vinyl Tartan Edition

£919from, inc VAT

  • Eight clan tartans, including Boyd Modern and Stewart Dress Modern
  • Vinyl outers and back
  • Seat heater and lumbar support available
See the Tartan Stuttgart →
ChoiceWhat you pickPrice
TrimThe combination on that listing, from black vinyl to your own Signature coloursSet by the trim
Waist size32 to 36 inch, or 36 to 38 inchNo change
Harness eyeletsNot required, silver or anthracite£130 for eyelets
BaseStandard base for the Mini frameNo change
Seat heater and lumbar supportFitted by Cobra, on the Signature and Tartan Edition listings£259

Read from the listings on 16 November 2026, prices inc VAT. The Signature and Tartan Edition are made to order, allow 4 to 6 weeks. Our guide to Cobra lumbar support explains the heater and lumbar pack.

Stuttgarts in classic Minis, and a pair in our showroom

The Cobra classic Mini frame: locking or non-locking

Cobra make their own frame for the classic Mini, listed for cars from 1959 to 2000, in a locking and a non-locking version. Both are base mount frames on the 291mm by 330mm pattern, which is exactly the pattern on the underside of every Stuttgart, so the seat bolts straight on with no adapter plate.

We recommend the locking frame. Cobra’s drawing shows its two sliding rails on top, so the seat moves backwards and forwards to suit the driver. At the back it latches the seat down the way later Minis did from the factory, and you release the catch to tip the seat forward for anyone climbing into the back.

The locking frame is sold for the driver side, the passenger side, or as a pair, in Cobra’s current revised design: part SUBFR03R for the driver side and SUBFR03L for the passenger side. A pair is £214.80.

The non-locking frame is £169.99 a pair and still tips forward for rear access, without the catch. Garreth recommends the locking frame for most builds.

The frame and the seat it takes

Every fitting point, from the floor up

The stack is four parts: the Mini floor, the Cobra frame, the sliding rails on the frame, and the Stuttgart on top. The frame bolts to the seat mounting points the factory put in the floor, so a standard floor needs no drilling. On an older Mini, Cameron always asks about the state of those floor points first.

Fitting pointWhat fixes thereDetail
Floor to frameThe Cobra Mini frameFactory seat mounting points, no drilling on a standard floor
Front legsFront of the frameEach leg drilled with a row of holes
Rear plateRear of the frameSlotted holes
Rails to frameTwo sliding railsTwo clamp strips per rail, each with two button head bolts and nyloc nuts
Seat to railsThe Cobra Stuttgart291mm x 330mm base pattern, standard base

From Cobra's drawing of the locking Mini frame and the Stuttgart listings. The non-locking frame takes the seat on the same 291mm x 330mm pattern.

1

Factory floor points

The Cobra frame bolts to the seat mounting holes already in the Mini floor, with no drilling on a standard floor.

2

Cobra Mini frame

Locking or non-locking, one per seat, in black steel with a tubular front hoop.

3

Sliding rails

Two rails clamped to the frame with strips, bolts and nyloc nuts, for fore and aft movement.

4

Cobra Stuttgart

Bolts down through its base on the 291mm x 330mm pattern, with the standard base chosen on the listing.

Before you drive itTorque the floor bolts properly and check that the seat belt buckle still reaches you with the new seat in place, because a new seat often moves the buckle. Do the same on the passenger side, and sit in the car with the seat at both ends of its travel.

Drop us an email or click to open a chat with the year of your Mini and what is bolted to the floor now, and Cameron will confirm the frame before you order.

How the seat adjusts once it is in

↔

Forwards and backwards

The sliding rails on the locking frame move the seat fore and aft, so a tall driver and a short one can both get comfortable.

↺

Recline by hand wheel

A round hand wheel on the side of the seat, at the hinge, tilts the backrest backwards and forwards in small steps, so you set the angle exactly.

⤓

Tip forward for the rear

The frame tips the seat forward for rear passengers, and on the locking frame a catch holds it down at the back until you release it.

A lever recliner moves in notches, but the Stuttgart’s hand wheel winds the backrest a little at a time. In a classic Mini the steering wheel is close and you sit further forward than in most cars, so a small change in backrest angle makes a real difference to your arms and shoulders.

Set the slide first and the backrest second, with the seat at your normal driving position, and then check the belt buckle again.

Matching the rest of the interior

Cobra also make a door and rear quarter panel set and a rear parcel shelf for the classic Mini. Both are made to order to match your seats, in vinyl, vinyl with cord or basketweave, or leather, so the whole cabin carries the same trim. The non-locking frame is here too, for builds that call for it.

Questions Mini owners ask us about the Stuttgart

Yes. The Stuttgart is 520mm wide and 530mm deep, and it bolts to Cobra’s classic Mini frame on the 291mm by 330mm pattern, with no adapter plate. The frame is listed for Minis from 1959 to 2000.
The locking frame. It slides the seat fore and aft, tips it forward for rear access and latches it down at the back. The non-locking frame tips forward without the catch.
No, not on a standard floor. The Cobra frame bolts to the seat mounting points the factory put in the Mini floor. If the floor has been repaired or replaced, send Cameron a photo first.
No. No maker sells a seat frame with height adjustment, for the classic Mini or any other car. Frames are made at a fixed height, so the seat height comes from the frame and seat you choose, and Cameron can tell you how a Stuttgart will sit in your Mini before you order.
With a hand wheel on the side of the seat at the hinge, which tilts the backrest backwards or forwards a little at a time so you can set the exact angle.
Yes. Cobra fit a seat heater and lumbar support together for £259, and it is a choice on the Signature and Tartan Edition listings. On the Vinyl or Leather Stuttgart, ask for it when you order and Cameron confirms it with the build.
The standard base, at no extra cost, which carries the 291mm by 330mm pattern that the Cobra Mini frame takes.
It is a four point harness compatible road and track seat, and you can add silver or anthracite harness eyelets on the listing for £130.

What we tell classic Mini owners

G

Garreth

Garreth's top tip

If you want a reclining seat with a headrest in a classic Mini, the Stuttgart is the one I point people to, because it is slim and shallow enough for the car.

Put it on the locking Mini frame, which gives you the slide, the tip forward for the back seats and the catch in one part.

C

Cameron

Cameron's fitting view

The seat and the frame share the 291mm by 330mm pattern, so the Stuttgart bolts straight on. What I check is the year of the Mini and the state of the floor points.

Send me the registration and a photo of what is in there now, and I will confirm the frame for each side before you order.

Putting Stuttgarts in your classic Mini?

Ring us with the year of your Mini and the trim you have in mind. Cally, our digital receptionist, takes your details and Cameron comes back to you with the seats and frames for your car. If you already have Cobra frames fitted, tell us which ones and we will check them against the Stuttgart.

Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text