Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Ford Fiesta Mk8 bucket seat guide

Mk8 generation, including ST; fitting-kit start dates vary

For the Mk8-generation Fiesta and ST, the vehicle fitting choices here come from Cobra and SW Motorsport. Choose the lower frame with the exact seat and upper mounting parts in mind, checking the fixing positions, installed height and cabin clearance together.

The shop lists Cobra from 2018 onwards and the SW single and pair bases from 2019 onwards; Cobra’s manufacturer application table starts the Mk8 in 2017, so an early build needs its exact application confirmed before ordering.

Keep this car separate from the earlier Fiesta generation, including ST180 and ST200. Send Garreth the build year and body style if the Mk7/Mk8 naming leaves you unsure which listing applies. Cameron can then check the seat, physical seating side and complete mounting arrangement.

Ford Fiesta MK8 on track with a helmeted driver
Ford Fiesta ST Mk8 on track

Mounting

A lower frame attaches to the Fiesta floor, while runners or side supports create the connection to the chosen seat; confirm each connection and the parts supplied with the order. Cameron can check whether the resulting position leaves the driver enough headroom and clearance to the console, door and controls.

Use the year and exact vehicle application shown for the selected frame; the general Mk8 heading does not widen a supplier’s start date.

SW Motorsport single-side base

The SW single-base listing is for the RHD Mk8 from 2019 onwards, including ST, with one base per selected seating position. Its description specifies SW-SM-0018 for the RHD driver and SW-SM-0082 for the RHD passenger.

Side supports, sliders, mounting bolts and harness eyebolts are separate. The optional supports have 8 or 10 mm seat-bolt choices; match those to the actual shell. The 345 mm width attribute supplies only one dimension, so confirm the complete upper fixing arrangement before pairing a seat or runner with the base.

SW Motorsport driver and passenger pair

The two-base listing supplies the stated driver and passenger bases in one order. It retains the shop’s 2019-onwards application and the same SW-SM-0018/0082 references. Its optional extras are described for both seats; ask Garreth to check the quantities and exact supports, runners and fixings included in your chosen order.

SW Motorsport ST listing

The ST Mk8 listing repeats SW-SM-0018 and SW-SM-0082, with RHD driver and passenger choices to match against your ST build and seating side. Its ST name alone does not extend the 2019-onwards single-base application to every early Mk8 car.

Cobra Mk8 frame and FRM-15 assembly

Cobra’s maker table identifies the Mk8 with SU-FOR-FIE-03L and SU-FOR-FIE-03R and the FRM-15 assembly. The shop product has RHD driver, RHD passenger and pair selections. Its passenger variant currently has an -LHD SKU suffix, so use the displayed seating-position choice and confirm physical left or right when checking the order.

Cobra publishes 292 and 405 mm FRM-15 configurations with Premium runners and different handle widths. Both drawings show a seat-dependent belt bracket and a spacer arrangement, with the passenger side requiring the corresponding reversed layout and handed bracket. Ask Garreth to confirm the correct seat-specific assembly and current contents.

The shop frame attribute says 291 x 330 mm, while Cobra describes its base-mounted seat patterns as 292 or 405 x 330 mm. Resolve the exact configuration before ordering. The 292 mm drawing also lists its base component as FRM-12 despite its FRM-15 title, so have Cobra confirm that supplied part designation; the drawing label does not establish interchange with the earlier Fiesta frame.

Sliding runners

Cobra Premium runners SUBFR07EL belong with the specified Cobra seat assembly and handle configuration. Endurance and Sparco 0049306 runners are separate options to check against the chosen SW base and seat. Compare both fixing interfaces, lock operation and total height before ordering.

For a competition installation, follow Cobra’s intended-use guidance on side mounts and runners as well as the event rules; its mounting page specifies a direct side-mount arrangement without runners for competition use.

Side supports

Sparco steel supports are an option for a compatible side-mounted shell and lower assembly, subject to shell width, fixing positions and hardware. Cobra Nogaro supports SUBFR31 are the Nogaro-specific choice. Cameron can check the complete support arrangement against the seat and required driving position.

Competition bucket seats

Sparco Sprint and Cobra Monaco Pro both list base and side mounting, but their base patterns differ: Sprint is 345 x 271 mm and Monaco Pro is 292 x 330 mm. Choose the mounting method for the actual supplied seat. A matching brand name or one shared dimension does not establish the complete installation.

OMP Champ-R and ARS-R, Mirco RTS-2 3D and RS2 3D, Sabelt GT3 and Sparco Evo L QRT are the side-mounted shell choices here. Match supports to the shell and lower assembly, then measure shoulder room and the seat’s clearance at the required driving position. A wider shell needs a specific cabin check.

Confirm the supplied seat’s approval label and event requirements separately from the frame, runners and vehicle installation.

Reclining sport seats

The Sparco R100 Vinyl, R100 Martini, R500 Fabric, R500 Sky and GT listings have a 345 x 271 mm base pattern. Check the selected lower base and runner interfaces, allowing room for backrest movement and clearance at the door and console.

Auto Style BS5 is listed at 345 x 280 mm, OMP RTS at 345 x 270 mm and Cobra Misano Anniversary Spec 2 at 291 x 330 mm. Those figures differ from the common Sparco pattern, so have Garreth confirm the exact seat, supplied runner contents and complete fixing arrangement before ordering.

OMP RTS is the recliner; the Mirco RTS-2 3D above is a separate fixed-back product.

Roll cage

SW’s Mk8 full bolt-in cage uses weld-in foot plates and passes through the dashboard, which needs cutting and trimming. Plan the installation with the cage maker before choosing it for the car. The current shop description also excludes factory-fitted sliding sunroofs, so confirm the precise body and roof application.

SW describes CDS tube dimensions and material in relation to Motorsport UK requirements; this does not establish approval for every championship or fitted car. Confirm the required specification, installation and current event rules with the maker before ordering.

Harnesses

Assess the TRS Clubman, TRS Magnum, Takata Drift II and Drift III, and Schroth Profi 3×2 with the exact seat and proposed anchorage arrangement. Strap count alone does not establish that an original belt point, harness bar or cage tube is suitable. Follow the selected belt maker’s instructions for anchor strength, belt angles and attachment hardware.

Cameron can help check the intended belt route through the seat and around the cabin. Confirm the belt’s current approval and event requirements, together with the lap, shoulder and any crotch-strap attachments. A suitable cage and a suitable harness installation are separate checks.

What fits

Compare the complete fixing pattern, exact vehicle application and supplied parts before choosing a mounting route.

Route or seatInterface or applicationContentsCheck before ordering
SW single /ST Mk8SW-SM-0018 driver /0082 passengerOne base per selected sideShop 2019-onwards scope; supports/sliders/fixings separate
SW pairOne driver and one passenger baseOptional extras described for both seatsConfirm quantity and exact upper parts
Cobra Mk8SU-FOR-FIE-03L/R;FRM-15RHD driver/passenger/pair choicesShop 2018 start vs maker 2017; exact kit needs checking
Cobra seat-specific assembly292 or 405 x 330 mm maker seat patternsPremium runners,appropriate handle and belt bracketsShop 291 x 330; 292 drawing has base-label conflict
Side-mounted shellsSupports matched to exact shellLower base and hardware checked togetherCabin width,headroom,controls and belt openings
Sparco Sprint /Cobra Monaco Pro345 x 271 / 292 x 330 mm base patternsBoth listings describe base and side mountingDifferent base patterns;choose actual mounting method
Sparco R100 /R500 /GT345 x 271 mm shop base patternConfirm selected rails and lower connectionBackrest travel and full assembly height
Auto Style BS5 /OMP RTS345 x 280 / 345 x 270 mm shop base patternsExact supplied seat and railsNeither figure equals 345 x 271 mm
Cobra Misano Anniversary Spec2291 x 330 mm shop base patternExact Cobra seat-specific assemblyConfirm maker pattern and supplied parts
SW full Mk8 cageWeld-in foot plates;through-dashboard layoutBody/roof and exact event specificationShop excludes factory sliding sunroofs;installation required

Common questions

The shop lists Cobra from 2018 and SW single and pair bases from 2019, while Cobra's maker table starts the Mk8 in 2017; confirm the exact vehicle application before ordering, especially for an early build.

Keep the earlier Fiesta generation separate and choose a supplier application specifically confirmed for the Mk8 car.

The current descriptions identify SW-SM-0018 as RHD driver and SW-SM-0082 as RHD passenger; select the physical side required for your car.

One single-base order covers one seating position; use the two-base listing if you need the stated driver and passenger bases together.

Its description supplies one driver and one passenger base. Side supports, sliders and installation hardware are separate unless chosen with the order. Confirm the quantities of optional extras for both seats.

Its shop description repeats SW-SM-0018 and SW-SM-0082; confirm the exact build and side, with the shop start-date limits still applying.

It gives only one dimension, so compare the complete seat or runner pattern, support layout and hardware before ordering.

Match the optional 8 or 10 mm support choice to the actual seat shell's specified bolts and complete lower assembly.

The current -LHD variant is labelled RHD passenger in the shop; select the displayed seating position and confirm the physical side against the supplied Cobra kit.

Cobra identifies SU-FOR-FIE-03L/R and FRM-15 for the Mk8; match the seat-specific configuration and exact supplied kit to that application.

The shop frame attribute says 291 x 330 mm and the maker describes 292 or 405 x 330 mm seat patterns; resolve the actual configuration and runner arrangement before ordering.

The 292 mm drawing has an FRM-15 title but an FRM-12 base-component label, so confirm the supplied designation with Cobra; that label alone does not establish interchange with an earlier Fiesta frame.

Measure the whole seat, frame, supports and any runners at the required driving position; the base description alone cannot establish the final height.

Their listed base patterns differ: Sprint 345 x 271 mm and Monaco Pro 292 x 330 mm, so check the actual seat and chosen mounting method.

Compare both dimensions and the supplied rails: Sparco choices here use 345 x 271 mm, Auto Style BS5 uses 345 x 280 mm and OMP RTS is listed at 345 x 270 mm.

SUBFR31 is the Nogaro-specific support option; confirm the complete Cobra seat and vehicle-frame assembly.

The maker specifies weld-in foot plates and a cage that passes through the dashboard, so arrange the complete installation with the maker before ordering.

The current shop description excludes factory-fitted sliding sunroofs; confirm the exact roof and body application with SW before ordering.

Confirm the exact cage specification, fitted installation and current championship rules with the maker; a material or tube-size compliance statement does not establish approval for every event.

Follow the belt maker's installation instructions for the actual seat and vehicle, including attachment strength, routing and belt angles; three, four or six straps alone cannot establish a suitable installation.

More help

Send Garreth the Mk8’s build year, body and roof type, whether it is an ST, and the physical seating side. Include the exact seat model and whether you need one seat or a pair. Cameron can check the frame, supports, rails and restraint arrangement against those details.

Call 0115 647 8650 or use the contact link below with the specification.

Need a personal recommendation?

We're here to ensure you pick the right seat. Contact us today.
Our showroom virtual walk through!
Have a walk around our showroom before you even buy your new seats. 
Our hands on experience, is what allows us to bring you our recommendations.
Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text