Choosing The Perfect Bucket Seats For Your Westfield And Caterham Kit Cars
Kit car seat guide
Choosing the right bucket seats makes a big difference to how a Westfield or Caterham drives. The two cars share a similar layout and cockpit size, so the same shortlist works for both: the Cobra Roadster 7 and four Tillett seats, the W1i, B10, C1 and B6 Screamer.
This guide goes through each one with the driver sizes they suit, then covers fitting, resin inserts for a made to measure fit, and what you need for FIA events.
- Westfield and Caterham cockpits are similar, so the same seats suit both
- The Cobra Roadster 7 is built for seven style cars, with a 400mm base
- The Tillett B6 Screamer and C1 are homologated to FIA 8855-1999
- The Tillett B10 is a road and track seat that works with a three point belt
- Resin seat inserts give a moulded fit when a seat is too roomy
- For FIA events, pair an FIA seat with an FIA 8854-1998 harness

Cobra Roadster 7
The Cobra Roadster 7 is designed for the narrow cockpit of seven style cars like the Westfield and Caterham. It is shaped to use the angle of the rear bulkhead, and the space that recovers goes into legroom. The number that matters is the 400mm base, the width at floor level between the sills and clear of the transmission tunnel, where a typical sports seat measures 500mm or more.
The standard seat is 750mm high and weighs 7kg. It comes in leather facings or vinyl, with colour options for the piping and trim, and there are versions listed for the Westfield and the Caterham.

Harness holes are an extra cost option on the standard Roadster 7 and cannot be added once the seat is trimmed, so decide before you order. The Roadster 7 Sport comes with harness slots, and the Sport Turbo is the tall version for longer torsos, at 920mm high. All are Road and Track approved, for fast road and track days rather than FIA events. Measure your own car at floor level and send us the figure if it is close to 400mm.
-
From £569.00 Incl. VATFrom £474.17 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £569.00 Incl. VATFrom £474.17 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £569.00 Incl. VATFrom £474.17 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £743.00 Incl. VATFrom £619.17 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Tillett B6 Screamer
The B6 Screamer is the FIA homologated version of Tillett’s B6 shell, a compact and upright seat built for track cars and low road cars. It is homologated to FIA 8855-1999, and both widths are covered: 44cm with the rolled edges on, and 40cm with them cut off, which helps in a tight cockpit.
It comes in GRP or carbon and GRP, weighs 5.8 to 6.1kg, and sits you low, which matters with a roll bar and a helmet. It is side mount only, takes a six point harness and is set for HANS use at 30 degrees. There is an XL version for larger drivers.
Tillett C1
The C1 is based on the B6 Screamer and adds side impact head support, which is the reason to choose it. It is homologated to FIA 8855-1999, with both the cut and uncut shells covered. It weighs 7.1kg as a bare shell or 8.1kg with its padded cushions, and it is side mounted, HANS compatible and takes a six point harness.
Widths run 41cm and 44cm as standard, and 47cm on the XL. The standard shell suits drivers up to 100kg with a waist up to 36 inches; the XL is for anyone above that. It comes in carbon or GRP, and it works without lower padding, which helps in an open car that gets wet.
-
From £1,234.36 Incl. VATFrom £1,028.63 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,414.28 Incl. VATFrom £1,178.57 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,516.19 Incl. VATFrom £1,263.49 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,151.39 Incl. VATFrom £959.49 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Tillett B10
The B10 is the B6 reworked for road and track use. Tillett cut the sides away so the standard three point belt still works, which also makes getting in and out easier. The front kicks up more than the B6, and the headrest sits higher for drivers with a long back.
It weighs 4.5kg and Tillett quote it for drivers up to 100kg with a waist around 36 inches; the B10 XL is for larger drivers. It comes in carbon and GRP or GRP, with a suede covered headrest pad, and can be side or base mounted. It is Road and Track approved, not FIA homologated.
Tillett W1i
The W1i is a low back seat with no headrest, from Tillett’s W series for narrow single seater and formula car cockpits. It suits a Westfield or Caterham where a full height seat will not fit under the roll bar, or where the car’s own head restraint does that job. It measures 40cm with the rolled edges cut off and 44cm with them on.
It can be base mounted or side mounted, takes a four point harness, and comes in black GRP or carbon and GRP, with an optional back frame. It is Road and Track approved. If the car has room for a headrest, the B6 or B10 is usually the better choice, so ask us which suits your setup.
-
From £604.55 Incl. VATFrom £503.79 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £520.08 Incl. VATFrom £433.40 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £639.00 Incl. VATFrom £532.50 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
| Seat | Approval | Weight | Mounting |
|---|---|---|---|
| Cobra Roadster 7 | Road and Track | 7kg | Seven style fitment |
| Tillett B6 Screamer | FIA 8855-1999 | 5.8 to 6.1kg | Side mount |
| Tillett C1 | FIA 8855-1999 | 7.1kg bare shell | Side mount |
| Tillett B10 | Road and Track | 4.5kg | Side or base mount |
| Tillett W1i | Road and Track | Not listed | Side or base mount |
Figures from our product listings.
Fitting your bucket seats
Plenty of owners have filmed their own installations, and some of the best advice is on YouTube. In this video, from The Parrott Bro’s, the driver fits a set of carbon shell seats and harnesses, shows the change he had to make to the seat slider handle to get them to fit, and explains how to measure up the fixing points in the car. It is well worth a watch before you start.
Resin seat inserts for a made to measure fit
For some Westfield and Caterham owners, even the narrowest bucket seat is not quite right, especially in competition where being held securely in the car matters. A resin seat insert is an alternative to changing seats. It is moulded around the driver, so it fills the gaps and supports the hips, back, shoulders and legs exactly where they need it.
For these cars we recommend the Real Race 70 litre poly bead resin kit. It is designed for open cockpit sports cars and single seaters such as Formula 3, Formula Renault and Ginetta, where a smaller driver has more space to fill than the 50 litre kit covers. The driver settles into a liner, the bead and resin mix goes in, and a vacuum pump draws it tight while it cures. The result cuts movement under braking and cornering, and keeps you comfortable over a long session.
Setting up for FIA events
If you are taking your Westfield or Caterham to an FIA sanctioned event, the seat and harness both need the right approval. From this guide, the Tillett B6 Screamer is our choice of FIA seat: it balances support, weight and a compact shape. The C1 is the one to pick if you want side head support.
For the harness, Sabelt make FIA 8854-1998 four point harnesses for both cars: the Silver Kit Car for the Westfield and the Steel Kit Car for the Caterham. Their 4 Point Caterham belt is for road and track days only, as it carries no homologation. A four point harness is not HANS compatible, so if you run a head and neck restraint you will need a six point belt. Garreth’s advice is to check your championship’s regulations and the dates on the labels before you buy, as FIA seats and harnesses have a service life.
-
From £357.60 Incl. VATFrom £298.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £218.40 Incl. VATFrom £182.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £114.00 Incl. VATFrom £95.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Which bucket seats fit a Westfield or Caterham?
Narrow seats built for seven style cars, such as the Cobra Roadster 7, and compact Tillett seats like the B6 Screamer, C1, B10 and W1i.
Which of these seats are FIA approved?
The Tillett B6 Screamer and C1 are homologated to FIA 8855-1999. The Cobra Roadster 7, Tillett B10 and W1i are Road and Track approved.
Can I use the standard seat belt with a Tillett seat?
The B10 has cut away sides so the standard three point belt works with it.
What if the bucket seat is too roomy for me?
A resin seat insert, such as the Real Race 70 litre kit, moulds a made to measure fit inside the seat.
Which harness should I use for FIA events?
An FIA 8854-1998 harness, such as Sabelt’s Westfield four point, or a six point belt if you run a HANS.
💬
Our pick for FIA eventsThe Tillett B6 Screamer
Compact, light and FIA 8855-1999 approved, it suits the tight cockpit of a seven.
Need a personal recommendation?
We're here to ensure you pick the right seat.
Contact us today.











