Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Ford Focus Mk2 bucket seat guide

Focus Mk2: choose the kit for the exact car, seat and seating side

The Focus Mk2 fitting choices below cover Sparco singles and pairs, Corbeau, two RECARO order listings and SW Motorsport. There is also a Safety Devices right-side seat mount available through its F162 cage range. Compare the complete installation before choosing the lower frame.

This is the European second-generation Focus guide. Its usual 2004 to 2011 heading is broader than some supplier applications: Sparco starts its listing in 2005 and SW names 2004 to 2010. Match the build details and body to the actual supplied kit rather than relying on the registration year alone.

The Focus ST225 has a separate guide. Garreth can check the model-specific order route if yours is an ST or RS. Cameron can work through the proposed seat, upper mounts and driving position with you.

Ford Focus MK2 on track with a helmeted driver
Ford Focus Mk2 on track

Mounting

The vehicle frame makes the lower connection to the car. Above it, the seat needs the correct fixing pattern, runners where specified, and suitable supports for a side-mounted shell. Have the mounting areas checked, including any previous repairs.

Cameron can compare the assembled height and clearances with the driver in position. Check the door, console, steering and controls together, and plan rear access on a three-door. A low base description or one matching bolt dimension cannot establish the whole installation.

Sparco single and pair fitting kits

Sparco’s single-frame listing uses the 004990681 family and offers a selected RHD driver or passenger position. Its upper pattern is 345 x 271 mm. The retained Sparco application table names Focus three- and five-door cars from 2005 and its 00493 runner arrangement; confirm the current supplied side and application.

The 004990681-X2 listing supplies the stated driver and passenger frames in one order, with seats separate. Check the actual rails and fixing contents before adding them. For a side-mounted shell, the upper supports and their connection to the lower kit must be specified together.

Corbeau base-mounted seat route

Corbeau CS16324 is the standard Mk2 listing, priced per seating position. The shop has a separate ST225 order listing, so have the exact car and package confirmed if yours is an ST. The illustration does not establish whether the supplied kit is a full frame or an adaptation arrangement.

Corbeau specifies base-mounted reclining and classic seats for its subframes, with double-locking runners included. It excludes side-mounted seats. Its general Focus year table spans a different range, so ask Garreth to confirm the actual European Mk2 kit before ordering separate rails or relying on the dates alone.

RECARO order pages, bodies and physical sides

The two shop order pages are labelled 2004 to 2008 and 2008 onwards, using 869016B and 869016B-4177 respectively. Each has an RHD position selection and supplies one frame. Have the actual supplier reference and physical side confirmed for either order.

RECARO’s linked table identifies 86.90.16B on the physical left and 86.90.26B on the right for DA3/DB3 applications. It has seat-specific rows, including a no-three-door restriction and spacer-dependent combinations. It does not establish a universal frame change at the facelift.

Match the exact seat version, body and required upper parts to the current RECARO documents. A reclining Sportster CS uses base mounting; a side-mounted shell needs the correct supports. Neither the RECARO name nor the shop year split proves that every seat shown below has an approved installation.

SW Mk2 base and model-specific orders

The SW Mk2 listing is a selected-side lower base, with SW-SM-0107 labelled RHD driver and SW-SM-0108 passenger. SW’s current maker page gives the same 0107/0108 references and names its Mk2 category 2004 to 2010. Check the exact body and build before ordering, particularly where the guide’s wider date range overlaps.

Supports, sliders, mounting bolts and harness eyebolts are separate unless selected with the order. The side-support add-ons offer 8 or 10 mm seat-bolt choices. Match them to the actual shell and complete fixing arrangement; the 345 mm width attribute supplies only one dimension.

The separate ST225 and RS Mk2 listings repeat that stated base family with trim-specific order references. Confirm the supplied assembly and exact vehicle for those enquiries. Use the dedicated ST225 guide when comparing that car’s other fitting kits.

Safety Devices right-side seat mount

The F162 cage listings offer RBF162 SMF-RH, a right-side seat mount identified as UK driver side. Safety Devices requires the original fastenings to be retained. Ask Cameron to check the intended seat connection, supplied parts and installation requirements before choosing it.

This is a named optional seat-mount order within the F162 range, rather than proof that the cage package includes it. The left-side equivalent and a universal seat pattern are not established by that option. Confirm the complete arrangement before ordering.

Planted application boundary

The Planted SB038 label names a Focus 2000 to 2007 application. Overlapping years do not establish that the bracket fits this European Mk2 body. Have the maker’s exact vehicle and market application confirmed before using that route.

Sliding runners and package contents

Sparco 0049306, Cobra Premium SUBFR07EL and Endurance runners are options to assess with the chosen lower assembly and seat. Compare both interfaces and the added height. The Cobra runner also has different handle-width choices; confirm the actual seat and rail arrangement rather than buying on brand alone.

Check package contents first, particularly where the Corbeau kit already describes runners. For competition use, follow the seat maker’s specified mounting method and current event requirements. Cobra’s mounting guidance calls for side mounting without runners for competition use.

Side supports

Sparco steel side supports are an option to assess with a compatible shell and lower assembly. Check shell width, fixing positions and hardware together. They do not convert the Corbeau base-mounted subframe into a side-mount route, or establish approval for the whole installation.

Fixed-back bucket seats

Cobra Monaco Pro, Premium Edition and Lotus Gold Edition are steel-frame fixed-back seats with base and side mounting listed. Their base pattern is 292 x 330 mm. Select the mounting method and matching lower connection for the actual supplied seat.

OMP Champ-R and Sparco Evo QRT are side-mounted fibreglass shells. They require suitable supports; Evo QRT is not a base-mounted alternative. Compare the shell dimensions and intended driving position before choosing the frame.

These seat listings state FIA 8855-1999 approval. Check the supplied label, mounting instructions and current event requirements separately from the frame and runners. Garreth can help compare the seat versions and parts needed for your car.

Reclining sport seats

Sparco R100 Martini Racing uses a 345 x 271 mm base pattern, while the Cobra Misano Anniversary shop listing states 291 x 330 mm. Compare both dimensions and the selected runner arrangement. Allow clearance for backrest movement and the operating controls.

The Corbeau RRS Jacquard Edition listing supplies two reclining seats, with vehicle fitting kits separate. Confirm the actual base pattern and a matched Corbeau kit for each position. One pair of seats does not include two vehicle frames.

The heated RECARO Sportster CS is a base-mounted recliner with a 405 x 290 mm shop pattern. Have the exact seat and body combination confirmed with its mounting documents; the two RECARO frame order pages do not prove that combination by themselves. Heating needs an appropriate installation checked separately.

Roll cages

Choose the cage for the exact body and roof, then plan the seat and restraint installation around the required assembly. The F162 options below are narrower than a general Mk2 heading. The selected sections, installation and current event documents matter.

Safety Devices F162 body and assembly checks

Safety Devices F162 names the 2004 to 2011 three-door Mk2 without a sunroof. It is intended for a car without interior trim, and the front cage passes through the dashboard. Check these requirements before choosing the single-door-bar, cross-door-bar or multipoint arrangement.

The single-door-bar route has two rear-diagonal choices. The cross-door-bar and multipoint routes use their corresponding rear and roof layouts. Confirm the matching front, rear and door-bar sections and exactly what the order supplies.

Safety Devices describes Motorsport UK compliance at publication and national homologation when it has approved the installation. Confirm the required current documentation and event acceptance. The seat-mount option is separate from those cage sections.

Custom Cages FF/22NA National specification

The current FF/22NA listing is Custom Cages’ six-point National Spec CDS weld-in kit. The maker names Focus 06> Mk2 and describes MSUK compliance. The shop’s older description still mentions International, so have the actual supplied code and kit specification confirmed before ordering.

Plan professional installation from the code-specific instructions and documents. A National compliance description is different from an FIA-certificated cage specification. Check the exact body, build and event requirements with the supplier and installer.

Harnesses

Assess the TRS Clubman, TRS Magnum, Takata Drift II and Drift III, and Schroth Profi 3×2 with the exact seat and anchorage arrangement. Strap count alone cannot establish suitable factory points, a cage tube or a harness-bar attachment. Follow the selected belt maker’s instructions for the required strength, routing and angles.

Cameron can help check the path through the seat and the lap, shoulder and any crotch-strap attachments. Confirm the belt’s actual approval and intended use separately from the seat and cage. A cage by itself does not complete the restraint installation.

What fits

Compare the vehicle application, seat interface and actual package before choosing the parts.

Route or seatApplication or methodInterface or contentsCheck before ordering
Sparco single / pair004990681 /004990681-X2345 x271 mm; maker table from2005,3/5doorSelected side / stated driver and passenger frames; check rails
Corbeau CS16324Base-mounted Corbeau recliners/classic seatsDouble-locking runners describedExact Mk2 package; separate ST225 order route
RECARO two shop order pages2004-2008 /2008onwards shop labelsMaker86.90.16Bleft /86.90.26BrightDA3/DB3 seat/body/spacer checks; no universal facelift rule
SW Mk2 /ST225 /RS Mk20107driver /0108passenger familySelected-side base; upper parts separateMaker category2004-2010; exact supplied car/body application
Safety Devices seat mountRBF162SMF-RH,right/UKdriverOptional through F162 listingsMUST retain original fastenings; exact seat connection
Planted SB0382000-2007 maker applicationVehicle/market needs confirmationOverlapping years do not prove European Mk2 fit
Cobra Monaco Pro /Premium /Lotus GoldBase and side mounting listed292 x330 mm base patternSelect actual mounting method and complete connection
OMP Champ-R /Sparco Evo QRTSide-mounted fibreglass shellsSuitable side supports requiredSeat label/instructions/event requirements
Sparco R100 Martini /Cobra MisanoBase-mounted recliners345 x271 /291 x330 mm shop patternsBoth interfaces and backrest/control clearance
Corbeau RRS Jacquard pairTwo reclining seatsVehicle kits separateActual base pattern and one matched kit per position
Heated RECARO Sportster CSBase-mounted recliner405 x290 mm shop patternExact seat/body documents and upper parts; heating installation
Safety Devices F162 cage2004-2011,three-door,no sunroofTrim removed; front through dashboardCorrect sections; installation approval and event documents
Custom Cages FF/22NA06> Mk2,National Spec CDSSix-point weld-in;MSUK compliance describedOlder International description conflicts; confirm actual kit

Common questions

Check each supplier application against the exact build and body; Sparco starts its listing in 2005 and SW names 2004 to 2010.

The ST225 has a separate guide linked above; use its model-specific order routes and confirm the actual supplied application.

The shop has a named SW RS Mk2 order listing using the stated 0107/0108 base family; confirm the exact car and complete supplied assembly.

004990681-X2 supplies the stated driver and passenger frames, with seats separate; check the rails and fixing contents before adding other parts.

A selected-side frame order covers one seating position; check the physical side and actual supplier code before ordering.

Corbeau excludes side-mounted seats from these subframes and specifies its base-mounted reclining and classic seats.

The listing and maker describe double-locking runners; confirm the actual Mk2 package before buying separate rails.

The shop splits them at 2008, but the linked maker table uses body, physical-side and seat-specific rows; confirm the actual code and assembly.

The linked table shows 86.90.16B on the left and 86.90.26B on the right for DA3/DB3 applications, with seat and body restrictions to check.

Confirm that exact seat version, body and required upper parts in the current documents; neither the brand name nor the shop year split proves the combination.

One selected-side lower base is supplied; supports, sliders, bolts and harness eyebolts are separate unless selected with the order.

The shop labels SW-SM-0107 as RHD driver and SW-SM-0108 passenger, matching the 0107/0108 references on the maker's Mk2 page.

Compare the complete fixing pattern, shell width, supports and runners; one matching dimension cannot establish the installed assembly.

RBF162 SMF-RH is a right-side mount identified as UK driver side; Safety Devices requires the original fastenings to be retained.

It is a separate selectable option in the F162 range; confirm the supplied package and required seat connection before ordering.

Its overlapping year range does not establish European Mk2 fit; confirm the exact maker vehicle and market application before choosing it.

The current Evo QRT listing specifies side mounting; use suitable supports and confirm the complete lower connection.

The three Monaco versions shown list base and side mounting; follow the actual seat instructions and confirm the selected assembly.

It supplies two reclining seats, with vehicle fitting kits separate; confirm one matched kit for each seating position.

It names the 2004 to 2011 three-door Mk2 without a sunroof, without interior trim; the front passes through the dashboard.

The current maker code identifies the six-point National Spec kit; have the supplied specification confirmed because the older shop description still mentions International.

Check the selected belt maker's instructions and the actual vehicle anchors; strap count alone cannot establish a suitable installation.

The belt still needs its specified anchors, routing, angles and compatible seat, with any crotch-strap attachments checked separately.

Send the build details, body and roof type, market, physical seating side, exact seat and whether you need one or two positions fitted.

More help

Send Garreth the car’s build details, body and roof type, market and physical seating side, together with the exact seat model. Say whether you need one seat or a pair, and include any competition requirements. Cameron can check the proposed frame, upper parts and driving position against that specification.

Call 0115 647 8650 or use the contact link below with the details.

Need a personal recommendation?

We're here to ensure you pick the right seat. Contact us today.
Our showroom virtual walk through!
Have a walk around our showroom before you even buy your new seats. 
Our hands on experience, is what allows us to bring you our recommendations.
Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text