Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Honda Civic Hatchback 1988-1991 Bucket Seat and Fitting Guide

Choose the fittings for your early Civic hatchback

“Which brackets do I need for bucket seats in my 1988-1991 Civic?” We would ask for the chassis code and a photograph beneath the existing seat. Planted separates the early and late three-door hatchbacks, while BRIDE identifies its applications by chassis code. The year on its own leaves too much of the fitting to chance.

Garreth would choose the seat around how you use the car and how you get past the bolsters. Cameron would then match the physical side, floor fittings and seat connection. For a car that still carries rear passengers, include access to the back seats in that discussion.

At a glance

  • Planted SB168 covers the maker-listed 1988-1989 three-door hatchback; SB204 is its 1990-1991 branch.
  • PCI separates SM-88EF from SM-90EF; its later application specifies a door-mounted seatbelt.
  • Our BRIDE EF9 listings have five distinct rail types. Match the full H029/H030 code and suffix to the chosen seat.
  • FO and FX have a 395mm side-mount interface; XL has a 430mm interface. FX is fixed.
  • RO and MO connect to specified bottom-mounted seat families. A matching car application does not settle the seat connection.
  • Measure the complete installed position and access before choosing the final shell and runner combination.

Identify the hatchback and its original fittings

Use this route for the three-door hatchback in the named 1988-1991 applications. Send the build year, chassis code, steering side and a photograph of the original seat mounting points with your enquiry. Imported cars need their original market details as well.

BRIDE’s Honda application table lists EF1, EF2, EF3 and EF9 three-door cars from September 1987 to August 1991 against the H029/H030 family. Our five linked BRIDE listings name the SiR EF9. Confirm the actual chassis and current rail application before using those options on another version.

The saloon and CR-X need their own application checks. Cameron would also inspect any earlier seat conversion, because its loose brackets may not be the original Honda assembly.

Compare the floor and seat connections

Choose the lower fitting for the car, then match the upper connection to the seat. A floor adapter, a sliding mechanism and a pair of side supports do different jobs. Keep the supplier’s complete assembly specification together when placing the order.

Use the full part reference when comparing a quote, including left or right and the rail-type suffix.

Fitting routes for the identified three-door hatchback
RouteCar checkSeat connectionAdjustment
Planted SB1681988-1989 three-door hatchSelected seat, upper supports and runnerDepends on the complete assembly
Planted SB2041990-1991 three-door hatchSelected seat, upper supports and runnerDepends on the complete assembly
PCI SM-88EF1988-1989 maker applicationSpecified side-mounted shell and packageS1 sliding assembly
PCI SM-90EF1990-1991; door-mounted seatbelt conditionSpecified side-mounted shell and packageS1 sliding assembly
BRIDE H029/H030 familyExact listed chassis and physical sideFO/FX/XL side mount; RO/MO bottom mountFX fixed; other listed types sliding

Planted brackets for the early and late hatchbacks

Start with SB168 for the maker-listed 1988-1989 three-door hatchback, or SB204 for 1990-1991. Each single-seat listing has physical left and right options. The SB168-X2 listing offers a pair for the early car; ask us to confirm the two supplied side references before ordering it.

Planted’s DR suffix identifies the physical left bracket and PA the physical right. On a right-hand-drive Civic, those map to passenger and driver respectively. Our current single-bracket choices use that RHD mapping.

These brackets provide the lower connection. Specify the seat, runner and any upper side supports as a complete stack. Planted distinguishes its Standard pattern from an Alternate Cobra pattern for particular runners; tell us the exact runner version before selecting the bracket.

Garreth would settle the shell and sliding requirement together, then order the matching components for each side. The paired bracket listing alone does not establish every upper fitting you need.

PCI sliding assembly for the early application

The SM-88EF-L-S1 and SM-88EF-R-S1 maker applications name 1988-1989 Civic. Our early PCI listing’s title spans 1988-1991, so use the complete selected part code to settle the year branch.

Specify the shell and supplied side supports with the S1 sliding package. Confirm its exact application and assembled width against your car before choosing the seat.

PCI sliding assembly for the later application

SM-90EF-L-S1 and SM-90EF-R-S1 cover the maker’s 1990-1991 application with its door-mounted seatbelt condition. Send a photograph of the actual belt arrangement. A later registration alone cannot confirm that condition on a UK or imported car.

Keep the specified base, S1 sliders and side supports together. Extra runners would change the assembly and its seating position.

BRIDE FO for a matching side-mounted shell

FO is a sliding side-mount route. BRIDE gives its seat interface as 290mm front to rear, with a 5mm tolerance each way, by 395mm across. Its named seat families must match the exact shell you select.

For the listed Civic application, H029FO is physical right and H030FO physical left. On a right-hand-drive car, select driver and passenger in that order. Ask us to match the full seat reference, including a wide or special version, before finalising the rail.

A compatible standard ZETA IV is a route to discuss here. Confirm the current seat and rail pairing and trial the shoulder clearance in your car.

BRIDE FX for a position fixed during fitting

FX uses a fixed assembly with side stays. Its published seat connection is 290mm front to rear, with a 5mm tolerance each way, by 395mm across. H029FX and H030FX identify the respective right and left Civic versions.

Choose this route when the position can remain fixed after fitting. Cameron would set the shell angle and pedal reach with the intended driver in the car. Allow for the shell and lower components when measuring final height; a rail description cannot establish your helmet clearance.

BRIDE XL for the maker’s specified wider shells

XL has a 430mm transverse side-mount interface and 290mm plus or minus 5mm front-to-rear spacing. BRIDE names ZIEG IV WIDE and ZETA III Type XL among its applications. Check that exact seat version with H029XL or H030XL.

The wider seat interface also needs a cabin trial. Measure shoulder clearance, tunnel space and door closure with the shell on the intended fittings.

BRIDE RO for its named bottom-mounted seats

RO is a sliding bottom-mount rail with a 405mm transverse connection and 260mm front-to-rear layout, shown by BRIDE as 25mm plus 235mm. The maker names specific GIAS and STRADIA families among its seat applications.

Give us the complete seat model and version so we can check H029RO or H030RO against it. These bottom-mount dimensions describe the seat connection; they do not describe the Civic floor holes.

BRIDE MO for the specified recliner connection

MO is a sliding bottom-mount route. BRIDE lists 290mm across by 330mm front to rear, or 345mm across by 271mm front to rear. Its named families include EUROSTER and DIGO, subject to the exact version.

The EUROSTER II CRUZ option below is a starting point for a matched BRIDE enquiry. Confirm the exact seat reference with H029MO or H030MO and check armrest clearance. A similar bolt pattern on another brand’s recliner still needs its own maker-approved assembly check.

Choose runners and upper supports with the bracket

For a Planted installation, settle whether the selected seat will slide or sit in a fixed position, then specify its upper connection. A side-mounted bucket uses the supports intended for that shell. A bottom-mounted recliner needs a compatible base connection and runner arrangement.

The Sparco runner, Cobra runner and Sparco side supports below are separate components to consider with that specification. Check the mounting holes and supplied hardware on each mating part. Cobra runner handle width is a control measurement and does not establish the bracket bolt pattern.

Use the included mechanism on an approved complete PCI or sliding BRIDE assembly. FX remains the fixed BRIDE route. We would confirm every component on the quote before recommending an additional runner.

Bucket seats to try for support and access

The Sparco Sprint, Cobra Monaco Pro and BRIDE ZETA IV give you three named shells to try. Choose the exact size and trim, then ask us to match its mounting provision to your fitting route. Seat names alone do not establish a complete Civic installation.

Cameron would check the shoulder wings against the door and the lower shell against the tunnel while setting the wheel and pedal position. Try entry and exit with the intended bolster height. Garreth would include rear-seat access in the choice if the hatchback still needs to carry passengers.

For ZETA IV, confirm the material and full seat reference on the order. Current maker options and older shop variants need matching by their actual part codes.

Use the ZETA IV drawing for a clearance trial

BRIDE’s standard ZETA IV drawing gives 560mm outer shoulder width and 460mm across the lower front. Its overall height is 890mm and side-view overall length 710mm. Compare those extents with the space around the chosen position in your Civic.

The cushion, shell angle and complete lower assembly affect where those extents sit. Record the driver’s seated position with the actual parts. The drawing does not supply the car’s internal width or a guaranteed installed height.

BRIDE ZETA IV published outer dimensions drawn to a common scaleBars use 0.8 units per millimetre. Shoulder width 560, lower front width 460, overall height 890 and side-view length710 millimetres. These are separate dimensions, not a seat silhouette or a cabin clearance drawing.BRIDE ZETA IV outer dimensionsOuter shoulder width560mmLower front width460mmOverall height890mmSide-view overall length710mm100mm scale reference
Source: BRIDE ZETA IV maker drawing. Check the exact shell version. Outer dimensions do not establish occupant size or clearance in the Civic.

Recliners for an adjustable backrest

Consider the Sparco R100, Cobra Daytona and BRIDE EUROSTER II CRUZ when an adjustable backrest suits the way you use the hatchback. Each needs a matched bottom-mount route. Specify the full seat and runner references before choosing the lower bracket.

Check the recline control beside the door, clearance through the adjustment range and any armrest beside the tunnel. An adjustable backrest does not establish how much rear access the installed seat provides. Try that movement in the car.

Garreth would choose the trim after trying the seat position and access. Cameron would confirm the complete base connection and control clearance for each side.

Match the restraint to the shell and anchorages

The Schroth Profi 3×2 and TRS Magnum six-point options use a different arrangement from the TRS Magnum four-point belt. Give us the exact shell and intended restraint before choosing between them. Confirm the belt’s current instructions and the car’s actual anchorage arrangement with the installer.

Use the correct seat openings and belt routing for the selected restraint. Anchorages, end fittings and any anti-submarine straps need a complete installation plan. A seat rail application by itself does not approve harness attachment to that rail.

For a retained three-point belt, check the buckle position and belt path with the seat manufacturer’s instruction and the assembled position.

Check the assembled position before final fitting

Confirm the chassis, year branch and physical side, then lay out the full seat and mounting package. Match each connection to the current manufacturer instruction, including the specified fixings. Earlier conversions need checking at the original floor attachment points.

Trial the assembly with the intended driver and the car’s usual driving footwear. Check pedal travel, wheel reach and restraint routing. Move a sliding assembly through its operating range and confirm its locking action using the maker’s procedure.

Close the door and check the seat through its intended adjustment range. Include rear access and the recline control where applicable. Follow the exact component instructions for final fitting; ask us for the correct document if the supplied references are unclear.

Common questions

Which years does the Planted SB168 bracket cover?

Planted lists SB168 for the 1988-1989 three-door hatchback. SB204 is its 1990-1991 branch. Match the actual car, physical side and selected upper assembly before ordering.

How do Planted DR and PA map to a right-hand-drive Civic?

DR identifies physical left and PA physical right in these maker applications. On a right-hand-drive car, left is passenger and right is driver. Confirm the full side code for each bracket in a pair.

Which PCI application should I choose?

Confirm the complete early or late code with the actual car and its restraint layout. The later maker application has a door-mounted seatbelt condition.

Does every BRIDE rail fit every bucket seat?

Each rail type has its own seat interface and named seat families. FO and FX use a 395mm transverse side connection, while XL uses 430mm. RO and MO connect beneath specified seats. Match the exact shell and rail suffix.

Which BRIDE rail is fixed?

FX is the fixed route among these five listed types. The other listed rail types provide sliding adjustment in their specified assemblies. Choose the adjustment you need with the complete seat package.

Can I fit a recliner on the same fittings as a bucket seat?

Check the exact bottom-mount connection, runner and lower bracket for the recliner. A bucket’s side supports connect differently. MO and RO also have different seat applications.

Do I need another sliding runner?

A complete sliding assembly uses its specified mechanism. For a separate Planted bracket route, choose the runner with the seat and upper fittings. Adding another mechanism changes the package and installed position.

Will the ZETA IV fit my Civic?

Its maker drawing provides outer dimensions for a clearance trial. Match the exact shell version and lower assembly, then measure the shoulder, tunnel and door clearance at the intended driving position. No universal Civic clearance measurement is established here.

How much lower will the seat sit?

Measure the complete shell, cushion, angle and lower assembly against the original seated position. The bracket name alone cannot establish a millimetre change in driver height or helmet clearance.

Can I use these fittings in a CR-X or saloon?

Ask for the application for that exact body and chassis. This guide follows the named three-door hatchback routes.

Can the rear seats remain accessible?

Check the installed seat’s movement and entry route in the actual three-door car. Sliding adjustment or a reclining backrest alone does not establish enough space to reach the rear.

What information should I send for a fitting recommendation?

Send the build year, chassis code, original market and steering side, with photographs of the floor fittings and restraint layout. Include the exact seat you want, the required side and whether you need sliding adjustment.

Garreth’s top tip

Garreth would start with the seat you can use comfortably, including getting into the hatchback and reaching the back seats if needed. Try the actual size and trim. Then keep the seat and matching mounting package on one specification so the order reflects the car you own.

Cameron’s fitting view

Cameron would put the chassis code, year branch and physical side beside every fitting reference. For a BRIDE route, the suffix settles the upper connection; for Planted, the selected runner and supports complete it. Send photographs of the existing assembly so we can check those details with you.

Plan your Honda Civic three-door hatchback 1988-1991 seat change

Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.

Back to the Car Seat Selector guide.

Manufacturer references: Planted application guide and installation instructions; PCI sliding mounts; BRIDE Honda application table, FO, FX, XL, RO and MO rail specifications.

Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text