Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Top 5 reclining seat choices for your Vauxhall Astra (Kadett) Mk3, including our fitting guide

The Mk3 Astra is well past thirty now, and the cars still getting track time are properly sorted by this point. Three decades and more of use means the factory seats on most of them have collapsed at the bolsters or worn through the trim. Replacing them with something fitted properly, on hardware that locates on the original mounting points, makes a bigger difference to how the car feels than most other changes at the same price.

There are two frame routes for the Mk3 in this guide. Cobra’s adaption subframe takes the 291mm base mount pattern, and you add a runner to it. Sparco’s direct fit subframe takes the 345mm pattern, and that is the route for the Sparco R500. Corbeau recliners are drilled for both patterns, so they go on either frame. Across the three brands, there are five seats in this guide.

  • Cobra adaption subframe, part COBVIAUA327: 291mm pattern, runner ordered separately
  • Sparco direct fit subframe: 345mm pattern, handed, one per side
  • Corbeau recliners take both patterns, so they fit either frame
  • The Sparco R500 goes on the Sparco frame only
  • All five seats in this guide are listed as 4 point harness compatible
Bright red Vauxhall Astra Mk3 cornering on a British race circuit with helmeted driver
The Mk3 Astra on track. The frame you choose decides which of the five seats below can go in it.

The two frame routes

A frame is the vehicle specific base that bolts to the floor in place of the standard seat mounting. There are two in this guide for the Mk3, and the difference between them is the bolt pattern on top.

Cobra’s adaption subframe carries the 291mm pattern. The word “adaption” matters here: it works with the hardware already in the car and does not include a runner, so the runner is a separate item on your order. Sparco’s direct fit subframe for the Astra Mk3 carries the 345mm x 271mm pattern that Sparco recliners use. It is handed, so you choose driver or passenger side and order one per seat, and the sliding runners go on the order separately.

291

Cobra adaption subframe

Part COBVIAUA327, £231.66 inc VAT per side. Runner not included; add Cobra Premium Sliding Runners separately. Takes Cobra base mount recliners (291mm) and Corbeau recliners (drilled for both patterns).

345

Sparco direct fit subframe

£86.68 inc VAT per side, handed driver or passenger. Runners ordered separately. Takes Sparco base mount recliners on the 345mm x 271mm pattern, plus Corbeau and OMP base mount seats.

The number that decides it

The Cobra subframe carries a 291mm x 330mm bolt pattern and the Sparco subframe carries 345mm x 271mm. Cobra’s own recliners use the first, Sparco’s use the second, and neither crosses over to the other frame. Corbeau drill their recliners for both, which is why every Corbeau in this guide fits either frame without any adaptor work.

SeatBolt patternCobra subframeSparco subframe
Corbeau PSR291 or 345FitsFits
Cobra Daytona291 x 330FitsNo
Corbeau RRS Low Base291 or 345FitsFits
Sparco R500345 x 271NoFits
Corbeau SVR291 or 345FitsFits
Two routes, five seatsPick the seat first; the frame and runner follow from it. The R500 needs the Sparco frame and the Daytona needs the Cobra frame. The three Corbeaus go on either. If you want help matching the combination before ordering, drop us an email or click to open a chat.

Corbeau PSR: the value pair

The PSR comes as two seats in the box, and on a car where you want a complete job on both sides without speccing everything separately, that often settles the question. The quality is honest for the price: a solid recliner mechanism and clean trim. The open base mount keeps the fit simple. The Mk3 has fairly tight door apertures, and the open base means there is no leg bolster catching you on the way in. Both are drilled for 291mm and 345mm, so they fit either frame.

  • £558.00 inc VAT for a pair of two seats
  • 32 to 38 inch waists, all heights suitable
  • Open base mount, easy entry and exit
  • Drilled for both 291mm and 345mm patterns
  • Listed 4 point harness compatible

Cobra Daytona: the support pick

When the Mk3 does regular track evenings this is usually where the conversation ends up on the counter. The bolsters are deeper than the PSR’s: they hold your hips and shoulders through a corner so your arms do the steering instead of holding you in place. Cobra build each one to order through their Signature range, so you specify fabric, vinyl or leather with whatever stitching colour you want, and heating or lumbar if the car needs them. Same 291mm pattern, straight onto the Cobra frame.

  • From £599.00 inc VAT, built to order in your chosen trim
  • 32 to 38 inch waists, all heights suitable
  • Signature trim: fabric, vinyl or leather with stitching choices
  • Heating and lumbar available as options
  • 291mm x 330mm pattern: Cobra adaption frame

Corbeau Sportline RRS Low Base: the headroom pick

The standard RRS has a tall backrest, and in the Mk3’s compact cabin that can eat the remaining headroom above the seat. The Low Base version brings the whole seat height down without changing the backrest profile or the support it gives you on track, so you keep what makes the RRS useful without losing the clearance you need on the road. Like the PSR, it is drilled for both patterns and fits either frame. If headroom is the first thing on the list, this is where I would start.

  • £498.00 inc VAT
  • 32 to 38 inch waists, all heights suitable
  • Low Base: reduced seat height for compact cabins
  • Drilled for both 291mm and 345mm patterns
  • Listed 4 point harness compatible

Sparco R500: the narrow one

The R500 is the seat for a cabin with no room to spare, and the Mk3’s is one of those. Sparco build it on a narrower tubular steel frame with lower side bolsters than most reclining seats, so it goes in where a wider shell fouls the sill or the tunnel, and it still holds you through a corner. There are no head support wings, which keeps it clear of the door frame on the way in. It comes in two trims at close to the same money: the fabric version breathes on a hot track day, and the Sky version is vinyl, which wipes down and suits a car you get into in overalls. Both are also listed as a pair if you are doing both sides. The R500 is 345mm pattern only, so on the Mk3 it goes on the Sparco direct fit frame, not the Cobra one.

  • £328.99 inc VAT in fabric, £349.00 in Sky vinyl
  • 32 to 38 inch waists, all heights suitable
  • Narrow tubular steel frame, lower side bolsters
  • Listed 4 point harness compatible
  • 345mm x 271mm pattern: Sparco direct fit frame

Corbeau SVR: the sculpted pair

The SVR is the most sculpted of Corbeau’s Sportline recliners through the sides, so it holds you better than the RRS or the PSR on a quick corner, but it still tilts forward for rear access and reclines the way a road seat should. It is also the seat we point people at first when the roof is low. We list it as a pair, one for each side, in black vinyl with black stitching, or as a heated pair if the car gets used through the winter. The heated seats need their own wiring and a switch, so plan that at the same time as the fitting, not afterwards. The SVR is drilled for both 291mm and 345mm, so it goes on either frame.

  • £1,020.00 inc VAT for a pair in vinyl, £1,248.00 for the heated pair
  • 32 to 38 inch waists, all heights suitable
  • Most sculpted sides of the Sportline recliners
  • Listed 4 point harness compatible
  • 291mm x 330mm or 345mm x 271mm: fits either frame

Getting it bolted down

Both frames locate on the Mk3’s factory seat mounting points. On a car this age, lift the carpet and look at the metal around those points before you order anything: a frame spreads the load into them properly, but it cannot fix corrosion underneath.

The other thing to sort before ordering is the runner, because neither frame includes one. On the Cobra route, Cobra’s Premium Sliding Runners come in two handle widths, 291mm and 405mm. Measure across the handle under your existing seat, or tell us the car and we will confirm which one to order. They are priced per seat, and the two-runner set covers both sides for less. On the Sparco route, the Sparco sliding runner kit matches the 345mm pattern and is sold as a set for two seats. A pair of seats means two frames and runners for both in the basket.

Your seatFrameRunner to order
Cobra DaytonaCobra adaption frameCobra Premium Sliding Runners, £84.00 inc VAT per seat, specify handle width
Sparco R500Sparco direct fit frameSparco sliding runner kit, £78.00 inc VAT for two seats
Corbeau PSR, RRS Low Base or SVRCobra adaption frameCobra Premium Sliding Runners, £84.00 inc VAT per seat, specify handle width
Corbeau PSR, RRS Low Base or SVRSparco direct fit frameSparco sliding runner kit, £78.00 inc VAT for two seats

Check seat belt buckle clearance before you drive. A sport seat often sits the buckle somewhere different to where it was on the standard setup, and it is worth confirming the belt clicks home cleanly before the car moves.

The five compared

SeatBolt patternWaistHeightWeightPrice inc VAT
Corbeau PSR291 or 34532 to 38inAll heightsNot published£558.00 per pair
Cobra Daytona291 x 33032 to 38inAll heights13.5kgFrom £599.00
Corbeau RRS Low Base291 or 34532 to 38inAll heightsNot published£498.00
Sparco R500345 x 27132 to 38inAll heightsNot published£328.99 fabric, £349.00 Sky
Corbeau SVR291 or 34532 to 38inAll heightsNot published£1,020.00 per pair

Prices include VAT and were correct on 30 September 2026. The Daytona is the only seat of the five with a published weight. The PSR and SVR prices cover a pair of two seats.

Common questions

Do I need to drill the floor of my Mk3 Astra?

Not on a standard floor. Both frames in this guide locate on the factory seat mounting points. Torque the floor bolts properly and check the seat belt buckle clearance before you drive, since a sport seat often puts the buckle somewhere different to where it was on the standard setup.

What is the difference between the adaption frame and the direct fit frame?

A direct fit frame replaces the original seat arrangement, while an adaption frame works with the hardware already in the car. On the Cobra route in this guide it is the adaption frame, which does not include a runner, so the runner is a separate item on your order. The Sparco direct fit frame takes its runners separately too.

Will these seats take a 4 point harness?

Every seat in this guide is listed by its manufacturer as 4 point compatible, with harness slots in the backrest. Tell us if you are fitting harnesses when you order and we will confirm the full combination works together.

Can I fit a Sparco recliner on the Cobra frame?

No. Sparco recliners like the R500 use only the 345mm x 271mm pattern, and the Cobra frame is 291mm x 330mm. That is why the R500 goes on the Sparco direct fit frame instead. Corbeau recliners are drilled for both patterns, so they go on either.

Are there reclining seat guides for other Vauxhall Astra generations?

Yes. We have a guide for the Vauxhall Astra Mk2 and a separate guide for the Mk2 Adaption setup, each with its own frame route and seat list.

What I would actually buy

If it were my money and the car does regular track evenings: the Cobra Daytona on the adaption frame, in whatever Signature trim suits the interior. Deep bolsters, properly built, the seat that makes the car feel finished rather than just fitted. If the cabin feels tight or the budget is tighter, the Sparco R500 on the Sparco frame is the one I would point you at: it is narrow and it still holds you. For both seats in one go with the most support of the Corbeaus, the SVR pair. If the job is both seats on a sensible budget, a pair of Corbeau PSRs does it properly. The RRS Low Base is the one if headroom is the first question.

If you want to talk through the frame and runner combination before anything goes in the basket, give us a call on 0115 647 8650. Cameron works out exactly these setups most days and can go through the options before you order.

Got a question about the equipment we sell?

Ask us anything. If it helps other drivers, we’ll turn your question into a full blog guide and share the answer on our site.

Why Choose Garreth And Cameron At GSM Performance?

We listen to every customer, continually refine the advice we give based on real feedback, and only supply parts we trust to deliver the results you need.
Our showroom virtual walk through!
Have a walk around our showroom before you even buy your new seats. 
Our hands on experience, is what allows us to bring you our recommendations.

Need a personal recommendation?

We're here to ensure you pick the right seat. Contact us today.
Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text