Ford Focus Mk2 bucket seat guide
Focus Mk2: choose the kit for the exact car, seat and seating side
The Focus Mk2 fitting choices below cover Sparco singles and pairs, Corbeau, two RECARO order listings and SW Motorsport. There is also a Safety Devices right-side seat mount available through its F162 cage range. Compare the complete installation before choosing the lower frame.
This is the European second-generation Focus guide. Its usual 2004 to 2011 heading is broader than some supplier applications: Sparco starts its listing in 2005 and SW names 2004 to 2010. Match the build details and body to the actual supplied kit rather than relying on the registration year alone.
The Focus ST225 has a separate guide. Garreth can check the model-specific order route if yours is an ST or RS. Cameron can work through the proposed seat, upper mounts and driving position with you.
- Sparco has one-frame and two-frame orders; seats, runners and fixings need their own package check.
- The RECARO shop pages split at 2008, while the linked maker table uses body, seat and physical-side entries; a facelift label alone cannot establish the complete fit.
- Corbeau CS16324 is for its base-mounted recliners and classic seats, with double-locking runners described in the kit; side-mounted seats need another route.
- SW lists SM-0107 driver and SM-0108 passenger, with supports, sliders and fixings separate unless selected; confirm the exact build and body application.
- Safety Devices RBF162 SMF-RH is a right-side option; its maker expressly requires the original fastenings to be retained.
- The Planted Focus 2000 to 2007 label does not establish fit for a European Mk2. Confirm a code-specific application before treating it as an option.
Mounting
The vehicle frame makes the lower connection to the car. Above it, the seat needs the correct fixing pattern, runners where specified, and suitable supports for a side-mounted shell. Have the mounting areas checked, including any previous repairs.
Cameron can compare the assembled height and clearances with the driver in position. Check the door, console, steering and controls together, and plan rear access on a three-door. A low base description or one matching bolt dimension cannot establish the whole installation.
Sparco single and pair fitting kits
Sparco’s single-frame listing uses the 004990681 family and offers a selected RHD driver or passenger position. Its upper pattern is 345 x 271 mm. The retained Sparco application table names Focus three- and five-door cars from 2005 and its 00493 runner arrangement; confirm the current supplied side and application.
The 004990681-X2 listing supplies the stated driver and passenger frames in one order, with seats separate. Check the actual rails and fixing contents before adding them. For a side-mounted shell, the upper supports and their connection to the lower kit must be specified together.
-
From £111.00 Incl. VATFrom £92.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Corbeau base-mounted seat route
Corbeau CS16324 is the standard Mk2 listing, priced per seating position. The shop has a separate ST225 order listing, so have the exact car and package confirmed if yours is an ST. The illustration does not establish whether the supplied kit is a full frame or an adaptation arrangement.
Corbeau specifies base-mounted reclining and classic seats for its subframes, with double-locking runners included. It excludes side-mounted seats. Its general Focus year table spans a different range, so ask Garreth to confirm the actual European Mk2 kit before ordering separate rails or relying on the dates alone.
-
From £347.40 Incl. VATFrom £289.50 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
RECARO order pages, bodies and physical sides
The two shop order pages are labelled 2004 to 2008 and 2008 onwards, using 869016B and 869016B-4177 respectively. Each has an RHD position selection and supplies one frame. Have the actual supplier reference and physical side confirmed for either order.
RECARO’s linked table identifies 86.90.16B on the physical left and 86.90.26B on the right for DA3/DB3 applications. It has seat-specific rows, including a no-three-door restriction and spacer-dependent combinations. It does not establish a universal frame change at the facelift.
Match the exact seat version, body and required upper parts to the current RECARO documents. A reclining Sportster CS uses base mounting; a side-mounted shell needs the correct supports. Neither the RECARO name nor the shop year split proves that every seat shown below has an approved installation.
SW Mk2 base and model-specific orders
The SW Mk2 listing is a selected-side lower base, with SW-SM-0107 labelled RHD driver and SW-SM-0108 passenger. SW’s current maker page gives the same 0107/0108 references and names its Mk2 category 2004 to 2010. Check the exact body and build before ordering, particularly where the guide’s wider date range overlaps.
Supports, sliders, mounting bolts and harness eyebolts are separate unless selected with the order. The side-support add-ons offer 8 or 10 mm seat-bolt choices. Match them to the actual shell and complete fixing arrangement; the 345 mm width attribute supplies only one dimension.
The separate ST225 and RS Mk2 listings repeat that stated base family with trim-specific order references. Confirm the supplied assembly and exact vehicle for those enquiries. Use the dedicated ST225 guide when comparing that car’s other fitting kits.
-
From £134.89 Incl. VATFrom £112.41 Excl. VATPayPal CreditJust inSelect options This product has multiple variants. The options may be chosen on the product page
Safety Devices right-side seat mount
The F162 cage listings offer RBF162 SMF-RH, a right-side seat mount identified as UK driver side. Safety Devices requires the original fastenings to be retained. Ask Cameron to check the intended seat connection, supplied parts and installation requirements before choosing it.
This is a named optional seat-mount order within the F162 range, rather than proof that the cage package includes it. The left-side equivalent and a universal seat pattern are not established by that option. Confirm the complete arrangement before ordering.
Planted application boundary
The Planted SB038 label names a Focus 2000 to 2007 application. Overlapping years do not establish that the bracket fits this European Mk2 body. Have the maker’s exact vehicle and market application confirmed before using that route.
Sliding runners and package contents
Sparco 0049306, Cobra Premium SUBFR07EL and Endurance runners are options to assess with the chosen lower assembly and seat. Compare both interfaces and the added height. The Cobra runner also has different handle-width choices; confirm the actual seat and rail arrangement rather than buying on brand alone.
Check package contents first, particularly where the Corbeau kit already describes runners. For competition use, follow the seat maker’s specified mounting method and current event requirements. Cobra’s mounting guidance calls for side mounting without runners for competition use.
-
From £84.00 Incl. VATFrom £70.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Side supports
Sparco steel side supports are an option to assess with a compatible shell and lower assembly. Check shell width, fixing positions and hardware together. They do not convert the Corbeau base-mounted subframe into a side-mount route, or establish approval for the whole installation.
Fixed-back bucket seats
Cobra Monaco Pro, Premium Edition and Lotus Gold Edition are steel-frame fixed-back seats with base and side mounting listed. Their base pattern is 292 x 330 mm. Select the mounting method and matching lower connection for the actual supplied seat.
OMP Champ-R and Sparco Evo QRT are side-mounted fibreglass shells. They require suitable supports; Evo QRT is not a base-mounted alternative. Compare the shell dimensions and intended driving position before choosing the frame.
These seat listings state FIA 8855-1999 approval. Check the supplied label, mounting instructions and current event requirements separately from the frame and runners. Garreth can help compare the seat versions and parts needed for your car.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £354.60 Incl. VATFrom £295.50 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £365.40 Incl. VATFrom £304.50 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Reclining sport seats
Sparco R100 Martini Racing uses a 345 x 271 mm base pattern, while the Cobra Misano Anniversary shop listing states 291 x 330 mm. Compare both dimensions and the selected runner arrangement. Allow clearance for backrest movement and the operating controls.
The Corbeau RRS Jacquard Edition listing supplies two reclining seats, with vehicle fitting kits separate. Confirm the actual base pattern and a matched Corbeau kit for each position. One pair of seats does not include two vehicle frames.
The heated RECARO Sportster CS is a base-mounted recliner with a 405 x 290 mm shop pattern. Have the exact seat and body combination confirmed with its mounting documents; the two RECARO frame order pages do not prove that combination by themselves. Heating needs an appropriate installation checked separately.
-
From £1,649.00 Incl. VATFrom £1,374.17 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,152.00 Incl. VATFrom £960.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £2,154.60 Incl. VATFrom £1,795.50 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Roll cages
Choose the cage for the exact body and roof, then plan the seat and restraint installation around the required assembly. The F162 options below are narrower than a general Mk2 heading. The selected sections, installation and current event documents matter.
Safety Devices F162 body and assembly checks
Safety Devices F162 names the 2004 to 2011 three-door Mk2 without a sunroof. It is intended for a car without interior trim, and the front cage passes through the dashboard. Check these requirements before choosing the single-door-bar, cross-door-bar or multipoint arrangement.
The single-door-bar route has two rear-diagonal choices. The cross-door-bar and multipoint routes use their corresponding rear and roof layouts. Confirm the matching front, rear and door-bar sections and exactly what the order supplies.
Safety Devices describes Motorsport UK compliance at publication and national homologation when it has approved the installation. Confirm the required current documentation and event acceptance. The seat-mount option is separate from those cage sections.
-
From £1,147.20 Incl. VATFrom £956.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,202.40 Incl. VATFrom £1,002.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,412.40 Incl. VATFrom £1,177.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Custom Cages FF/22NA National specification
The current FF/22NA listing is Custom Cages’ six-point National Spec CDS weld-in kit. The maker names Focus 06> Mk2 and describes MSUK compliance. The shop’s older description still mentions International, so have the actual supplied code and kit specification confirmed before ordering.
Plan professional installation from the code-specific instructions and documents. A National compliance description is different from an FIA-certificated cage specification. Check the exact body, build and event requirements with the supplier and installer.
Harnesses
Assess the TRS Clubman, TRS Magnum, Takata Drift II and Drift III, and Schroth Profi 3×2 with the exact seat and anchorage arrangement. Strap count alone cannot establish suitable factory points, a cage tube or a harness-bar attachment. Follow the selected belt maker’s instructions for the required strength, routing and angles.
Cameron can help check the path through the seat and the lap, shoulder and any crotch-strap attachments. Confirm the belt’s actual approval and intended use separately from the seat and cage. A cage by itself does not complete the restraint installation.
-
From £96.00 Incl. VATFrom £80.00 Excl. VATPayPal CreditAmazing valueSelect options This product has multiple variants. The options may be chosen on the product page
-
From £120.00 Incl. VATFrom £100.00 Excl. VATPayPal CreditAmazing valueSelect options This product has multiple variants. The options may be chosen on the product page
-
From £246.00 Incl. VATFrom £205.00 Excl. VATPayPal CreditAmazing valueSelect options This product has multiple variants. The options may be chosen on the product page
-
From £274.80 Incl. VATFrom £229.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £294.00 Incl. VATFrom £245.00 Excl. VATPayPal CreditAmazing valueSelect options This product has multiple variants. The options may be chosen on the product page
-
From £324.00 Incl. VATFrom £270.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £444.01 Incl. VATFrom £370.01 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
What fits
Compare the vehicle application, seat interface and actual package before choosing the parts.
| Route or seat | Application or method | Interface or contents | Check before ordering |
|---|---|---|---|
| Sparco single / pair | 004990681 /004990681-X2 | 345 x271 mm; maker table from2005,3/5door | Selected side / stated driver and passenger frames; check rails |
| Corbeau CS16324 | Base-mounted Corbeau recliners/classic seats | Double-locking runners described | Exact Mk2 package; separate ST225 order route |
| RECARO two shop order pages | 2004-2008 /2008onwards shop labels | Maker86.90.16Bleft /86.90.26Bright | DA3/DB3 seat/body/spacer checks; no universal facelift rule |
| SW Mk2 /ST225 /RS Mk2 | 0107driver /0108passenger family | Selected-side base; upper parts separate | Maker category2004-2010; exact supplied car/body application |
| Safety Devices seat mount | RBF162SMF-RH,right/UKdriver | Optional through F162 listings | MUST retain original fastenings; exact seat connection |
| Planted SB038 | 2000-2007 maker application | Vehicle/market needs confirmation | Overlapping years do not prove European Mk2 fit |
| Cobra Monaco Pro /Premium /Lotus Gold | Base and side mounting listed | 292 x330 mm base pattern | Select actual mounting method and complete connection |
| OMP Champ-R /Sparco Evo QRT | Side-mounted fibreglass shells | Suitable side supports required | Seat label/instructions/event requirements |
| Sparco R100 Martini /Cobra Misano | Base-mounted recliners | 345 x271 /291 x330 mm shop patterns | Both interfaces and backrest/control clearance |
| Corbeau RRS Jacquard pair | Two reclining seats | Vehicle kits separate | Actual base pattern and one matched kit per position |
| Heated RECARO Sportster CS | Base-mounted recliner | 405 x290 mm shop pattern | Exact seat/body documents and upper parts; heating installation |
| Safety Devices F162 cage | 2004-2011,three-door,no sunroof | Trim removed; front through dashboard | Correct sections; installation approval and event documents |
| Custom Cages FF/22NA | 06> Mk2,National Spec CDS | Six-point weld-in;MSUK compliance described | Older International description conflicts; confirm actual kit |
Manufacturer references: dated Sparco application table, RECARO frame and seat table, Corbeau subframes, SW Mk2 base, Safety Devices F162, Custom Cages National kit and Cobra mounting guidance.
Common questions
Does every kit cover all 2004 to 2011 cars?
Check each supplier application against the exact build and body; Sparco starts its listing in 2005 and SW names 2004 to 2010.
Where is the ST225 guide?
The ST225 has a separate guide linked above; use its model-specific order routes and confirm the actual supplied application.
Does an RS Mk2 need its own kit check?
The shop has a named SW RS Mk2 order listing using the stated 0107/0108 base family; confirm the exact car and complete supplied assembly.
What does the Sparco pair order include?
004990681-X2 supplies the stated driver and passenger frames, with seats separate; check the rails and fixing contents before adding other parts.
How many positions does one single frame cover?
A selected-side frame order covers one seating position; check the physical side and actual supplier code before ordering.
Can the Corbeau kit take side-mounted shells?
Corbeau excludes side-mounted seats from these subframes and specifies its base-mounted reclining and classic seats.
Does the Corbeau kit include runners?
The listing and maker describe double-locking runners; confirm the actual Mk2 package before buying separate rails.
Why are there two RECARO order pages?
The shop splits them at 2008, but the linked maker table uses body, physical-side and seat-specific rows; confirm the actual code and assembly.
Which physical sides do the RECARO codes identify?
The linked table shows 86.90.16B on the left and 86.90.26B on the right for DA3/DB3 applications, with seat and body restrictions to check.
Does the RECARO frame automatically fit Sportster CS?
Confirm that exact seat version, body and required upper parts in the current documents; neither the brand name nor the shop year split proves the combination.
What is supplied with the SW base?
One selected-side lower base is supplied; supports, sliders, bolts and harness eyebolts are separate unless selected with the order.
Which SW code is the RHD driver side?
The shop labels SW-SM-0107 as RHD driver and SW-SM-0108 passenger, matching the 0107/0108 references on the maker's Mk2 page.
Is a 345 mm width enough to establish the seat fit?
Compare the complete fixing pattern, shell width, supports and runners; one matching dimension cannot establish the installed assembly.
What is the F162 seat-mount option?
RBF162 SMF-RH is a right-side mount identified as UK driver side; Safety Devices requires the original fastenings to be retained.
Does a cage order include that seat mount?
It is a separate selectable option in the F162 range; confirm the supplied package and required seat connection before ordering.
Does the Planted 2000 to 2007 bracket fit this Mk2?
Its overlapping year range does not establish European Mk2 fit; confirm the exact maker vehicle and market application before choosing it.
Is the Sparco Evo QRT base-mounted?
The current Evo QRT listing specifies side mounting; use suitable supports and confirm the complete lower connection.
Can the Cobra Monaco seats use either mounting method?
The three Monaco versions shown list base and side mounting; follow the actual seat instructions and confirm the selected assembly.
Does the RRS Jacquard pair include vehicle frames?
It supplies two reclining seats, with vehicle fitting kits separate; confirm one matched kit for each seating position.
Which car does the Safety Devices F162 cage name?
It names the 2004 to 2011 three-door Mk2 without a sunroof, without interior trim; the front passes through the dashboard.
Is FF/22NA an International cage?
The current maker code identifies the six-point National Spec kit; have the supplied specification confirmed because the older shop description still mentions International.
Does a three- or four-point belt automatically use the factory anchors?
Check the selected belt maker's instructions and the actual vehicle anchors; strap count alone cannot establish a suitable installation.
Does a cage complete the harness installation?
The belt still needs its specified anchors, routing, angles and compatible seat, with any crotch-strap attachments checked separately.
What details should I send before ordering?
Send the build details, body and roof type, market, physical seating side, exact seat and whether you need one or two positions fitted.
More help
Send Garreth the car’s build details, body and roof type, market and physical seating side, together with the exact seat model. Say whether you need one seat or a pair, and include any competition requirements. Cameron can check the proposed frame, upper parts and driving position against that specification.
Call 0115 647 8650 or use the contact link below with the details.
Need a personal recommendation?
We're here to ensure you pick the right seat.
Contact us today.




















