Ford Fiesta Mk3 bucket seat guide
Mk3 generation, including XR2i, RS Turbo and RS1800
The Fiesta Mk3 fitting choices here come from OMP, Sparco, Cobra and Corbeau. Start with the exact vehicle application and seating side, then choose the seat and upper mounting parts together. These kits use different arrangements, so one fitting method does not cover every option.
This guide includes XR2i, RS Turbo and RS1800 enquiries within the Mk3 range. The shop describes Cobra and OMP applications across 1989 to 1997, but its Corbeau listing specifies 1989 to 1994 and the Mk3 cage listings stop at 1996. Confirm the individual product application against the car before ordering.
Send Garreth the build year, body style and intended use if the registration year or Fiesta generation is unclear. Cameron can check the exact seat and installed driving position. For the following generation, use our 1995 to 2002 Fiesta guide.
- Four fitting brands: OMP, Sparco, Cobra and Corbeau, each with its own application and upper mounting arrangement.
- OMP HC776D and Sparco 00499062DX are labelled RHD driver; HC776S and 00499062SX are labelled RHD passenger in the current shop options.
- Cobra AB-FO-FI3 is an adaptation-bar kit. Its description excludes runners, so confirm the selected order contents and seat-specific rail arrangement.
- The Corbeau shop application is 1989 to 1994. Corbeau specifies base-mounted recliners and classic seats for its subframes and excludes side-mounted seats.
- F044 is not for competition use; F055 bolt-in and F081 weld-in cages have separate installation and specification checks.
- Compare the complete fixing pattern, installed height and cabin clearance before choosing the seat, supports and any runners.
Mounting
The vehicle kit forms the lower connection to the Fiesta. A base-mounted seat then needs its fixing pattern and runner arrangement checked; a side-mounted shell needs suitable supports and a lower assembly intended for that mounting method. Have the seat mounting areas inspected before installation, including any previous repairs.
Cameron can check the proposed stack of frame, supports and runners against the required driving position. Measure clearance to the door, console and controls with the actual seat in mind. A narrow seat name or a low frame description alone cannot establish the final fit.
OMP HC776 fitting frame
The OMP HC776 listing has two current choices: HC776D for the RHD driver and HC776S for the RHD passenger. Each covers one seating position. The shop lists 345 x 271 mm and 405 x 290 mm upper fixing patterns; compare the complete connection to the exact supplied seat or runner.
A 405 x 290 mm pattern does not establish compatibility with every RECARO seat. For a side-mounted shell, confirm suitable supports, bolts and the lower assembly together. Keep this Mk3 application separate from the later Fiesta OMP frame.
-
From £109.02 Incl. VATFrom £90.85 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Sparco 00499062 fitting frame
Sparco 00499062DX is labelled RHD driver and 00499062SX is labelled RHD passenger in the shop. Order the selected side for each seat required and confirm the physical position before purchase. The listing describes a 345 x 271 mm upper pattern.
Confirm what the supplied Mk3 kit contains and how it connects to the chosen runners or supports; an illustrative frame photograph does not establish its contents.
-
From £87.00 Incl. VATFrom £72.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Cobra Mk3 adaptation bars
Cobra AB-FO-FI3 supplies adaptation bars for the Mk3 and is described for use with the original mounting hardware. The shop offers driver, passenger and pair selections. Its description says runners are separate, while the order options also use slide and tilting labels, so ask Garreth to confirm exactly what the selected order supplies before adding rails.
The shop bar attribute says 291 x 330 mm; Cobra describes its base-mounted seat patterns as 292 or 405 x 330 mm. Match the actual seat and runner configuration to the bars. Confirm the required Premium runner handle width and resolve the fixing-pattern differences for the supplied arrangement.
Corbeau base-mounted seat route
The Corbeau shop listing specifies Mk3 applications from 1989 to 1994, with driver or passenger and slide or tilting choices. Keep that stated date limit when checking an order. A later registration or a general Mk3 description needs an exact supplier application check.
Corbeau states that its subframes serve its base-mounted reclining and classic seats, include double-locking runners and are unsuitable for side-mounted seats. The shop describes more than one frame or adaptation arrangement, so confirm the actual Mk3 package before buying extra rails. The current maker table does not establish a Mk3-specific fitting code.
Sliding runners
Sparco 0049306, Endurance and Cobra Premium SUBFR07EL are runner choices to assess with the selected kit and seat. Check the fixing positions at both ends and the extra height the rails add. Cobra Premium runners also need the correct handle configuration for the seat.
Avoid duplicating rails where the confirmed kit already supplies them. For competition use, follow the exact seat maker and event requirements; Cobra specifies side mounts without runners for its competition installations.
-
From £84.00 Incl. VATFrom £70.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Side supports
Sparco steel supports are an option for a compatible side-mounted shell and suitable lower assembly. Cobra SUBFR31 supports are intended for the Nogaro. Check shell width, fixing positions and specified hardware together; adding supports does not turn the Corbeau base-mounted subframe into an approved side-mount route.
Fixed-back bucket seats
Cobra Monaco Sport Narrow and Monaco Pro list both base and side mounting with a 292 x 330 mm base pattern. The Narrow is listed for road and track use, while Monaco Pro carries an FIA 8855-1999 listing. Choose the mounting method for the actual supplied seat and confirm its current approval label for the intended event.
OMP TRS-X also lists base and side mounting, with a 345 x 271 mm base pattern and FIA 8855-1999 approval. It needs a different base connection from the Cobra seats. Cameron can compare the chosen lower kit and complete mounting arrangement before you order.
OMP Champ-R, Sparco Rev QRT and Sparco Evo QRT are side-mounted fixed-back shells. Match suitable supports to the exact seat and lower assembly. Check shoulder width and headroom in the Fiesta at the intended driving position.
OMP Classic 1970s Revival HA737E is a fixed-back, base-mounted seat, with a 345 x 271 mm shop pattern and road and track listing. It belongs with the fixed seats here; it has no reclining mechanism.
-
From £264.00 Incl. VATFrom £220.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Reclining sport seats
The Sparco R100 Martini uses a 345 x 271 mm base pattern, while Auto Style BS5 is listed at 345 x 280 mm. Check the selected frame and rails against the exact seat. Backrest movement and access to the adjustment controls also need room in the cabin.
The Corbeau RRS listing below supplies two standard-base reclining seats in black vinyl. Vehicle frames are separate. Its attributes show two possible base patterns, so have Garreth confirm the supplied seat version and matched Corbeau Mk3 assembly before ordering.
One RRS pair order supplies two seats, but a single-side vehicle subframe order supplies only that selected position; check both frame quantities and their actual contents.
Roll cages
The cage options below have different uses and installation requirements. Match the exact body, roof and year before choosing a configuration. Plan the seat position and required occupant clearance with the cage installer.
F044 rear cage
Safety Devices lists F044 for the Mk3 BE13 from 1989 to 1996, three-door and without a sunroof, and states it is not for competition use. The rear choices differ in diagonal and harness-bar arrangement. Its separate Mk4/5 application does not establish interchangeability of the cars’ seat frames.
-
From £498.00 Incl. VATFrom £415.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
F055 rear and full bolt-in cages
The shop lists F055 rear and full bolt-in options for the Mk3, with the full cage specifying a 1989 to 1996 three-door application. The rear options are 5SMU with a fixed diagonal, 5SMU-HB with a diagonal and harness bar, or 5SXU with a cross diagonal and harness bar. Confirm the exact rear configuration and order contents.
The full F055 layout passes through the dashboard and includes a dash bar and lower turret brace. Its front section must be used with a rear cage, while its dedicated door bars require front and rear sections. Check the selected assembly, installation instructions and certification documents with Safety Devices against the event requirements.
-
From £558.00 Incl. VATFrom £465.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £943.20 Incl. VATFrom £786.00 Excl. VATPayPal CreditMade to orderKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
F081 full weld-in cage
F081 is the full CDS weld-in cage RBF081 6SXX for the 1989 to 1996 Mk3 BE13 three-door. Safety Devices lists Motorsport UK/FIA homologation. Arrange the complete welded installation and confirm its documentation and current event requirements before ordering.
Harnesses
The TRS Clubman, TRS Magnum, Takata Drift II and Drift III, and Schroth Profi 3×2 choices below need assessing with the exact seat and proposed anchor arrangement. The number of straps does not establish suitable mounting points. Follow the chosen belt maker’s instructions for attachment strength, routing and belt angles.
A cage option with a harness bar still needs its intended belt attachment and loading checked. Cameron can help review the route through the seat and the required lap, shoulder and any crotch-strap attachments. Confirm the belt’s current approval separately from the cage and seat installation.
-
From £96.00 Incl. VATFrom £80.00 Excl. VATPayPal CreditAmazing valueSelect options This product has multiple variants. The options may be chosen on the product page
-
From £120.00 Incl. VATFrom £100.00 Excl. VATPayPal CreditAmazing valueSelect options This product has multiple variants. The options may be chosen on the product page
-
From £246.00 Incl. VATFrom £205.00 Excl. VATPayPal CreditAmazing valueSelect options This product has multiple variants. The options may be chosen on the product page
-
From £274.80 Incl. VATFrom £229.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £294.00 Incl. VATFrom £245.00 Excl. VATPayPal CreditAmazing valueSelect options This product has multiple variants. The options may be chosen on the product page
-
From £324.00 Incl. VATFrom £270.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £444.01 Incl. VATFrom £370.01 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
What fits
Compare the complete mounting arrangement and supplied parts before choosing a kit; the seat pattern is only one connection in the installation.
| Route or seat | Application or method | Interface or contents | Check before ordering |
|---|---|---|---|
| OMP HC776 | HC776D RHD driver; HC776S RHD passenger | Shop 345 x 271 or 405 x 290 mm patterns | Exact seat or runner connection; no universal RECARO fit |
| Sparco 00499062 | DX RHD driver; SX RHD passenger | Shop 345 x 271 mm pattern | Confirm supplied kit contents and upper assembly |
| Cobra AB-FO-FI3 | Adaptation bars; driver, passenger or pair | Description excludes runners | Shop 291 x 330 mm; match actual seat and rails |
| Corbeau Mk3 | Shop 1989 to 1994; select physical side | Base-mounted Corbeau recliners/classic seats | Confirm exact package and runner contents; excludes side mounts |
| Cobra Monaco Sport Narrow / Pro | Both list base and side mounting | 292 x 330 mm base pattern | Narrow road/track listing; Pro FIA listing |
| OMP TRS-X | Base and side mounting | 345 x 271 mm base pattern | Listed FIA 8855-1999; check actual seat label |
| OMP Champ-R / Sparco Rev and Evo QRT | Side-mounted fixed-back shells | Suitable supports and lower assembly | Cabin width, installed height and hardware |
| OMP Classic 1970s Revival | Fixed-back base mount | 345 x 271 mm shop pattern | Road/track listing; no reclining mechanism |
| Auto Style BS5 / Sparco R100 Martini | Base-mounted recliners | 345 x 280 / 345 x 271 mm respectively | Different fixing patterns; allow backrest movement |
| Corbeau RRS pair | Two standard-base reclining seats | Vehicle frames separate | Confirm seat version and frames for both positions |
| Safety Devices cages | F044 rear; F055 rear/full; F081 weld-in | Different application and use limits | Check selected configuration and installation |
Manufacturer references: Cobra mounting guidance, Corbeau subframe guidance, Safety Devices F044 and Safety Devices F081.
Common questions
Which fitting brands are available for the Mk3?
This guide covers OMP, Sparco, Cobra and Corbeau listings; match each kit's exact application and mounting method to the car and seat.
Do all Mk3 fitting products cover the same years?
The shop describes Cobra and OMP across 1989 to 1997, Corbeau from 1989 to 1994 and the Mk3 cage options from 1989 to 1996; confirm the chosen product for the exact car.
Which OMP side should I choose?
The current shop options label HC776D as RHD driver and HC776S as RHD passenger, with one frame for each selected seating position.
Which Sparco side should I choose?
The current shop options label 00499062DX as RHD driver and 00499062SX as RHD passenger; confirm the physical side for the car before ordering.
Does OMP's wider pattern fit every RECARO seat?
A 405 x 290 mm fixing pattern alone does not establish compatibility with every RECARO seat; check the exact seat, rails and complete connection.
What is the Cobra AB-FO-FI3 kit?
It is the Mk3 adaptation-bar listing, described for use with original mounting hardware; confirm the seat-specific upper connection and selected side or pair order.
Are runners included with the Cobra bars?
The description excludes runners, although the order options use slide and tilting labels. Confirm the selected package before adding separate rails.
Why do the Cobra mounting figures differ?
The bar listing states 291 x 330 mm and Cobra describes 292 or 405 x 330 mm seat patterns, so check the actual seat and runner configuration before ordering.
Can I fit a side-mounted shell to the Corbeau subframe?
Corbeau excludes side-mounted seats from these subframes; use a separately confirmed lower assembly and support arrangement intended for the chosen shell.
Should I add runners to the Corbeau kit?
Corbeau describes runners in its subframe kits, while the shop also describes adaptation arrangements; confirm the actual Mk3 contents before ordering extra rails.
Are Monaco Sport Narrow and Monaco Pro side-mount only?
Both current listings describe base and side mounting with a 292 x 330 mm base pattern; choose the method for the supplied seat and suitable lower assembly.
Is OMP TRS-X a base-mounted seat?
Its current listing describes both base and side mounting, with a 345 x 271 mm base pattern and FIA 8855-1999 approval; confirm the supplied seat and intended installation.
Does the Sparco Evo QRT use base bolts?
The Evo QRT listing here specifies side mounting, so check suitable supports and the lower assembly for the exact shell.
Is OMP Classic 1970s Revival a recliner?
HA737E is a fixed-back, base-mounted seat with a 345 x 271 mm shop pattern and road and track listing.
Does the Corbeau RRS pair include vehicle frames?
It supplies two standard-base reclining seats, with vehicle frames separate; check the seat version and frame quantity for both seating positions.
Are BS5 and R100 Martini the same base pattern?
The shop lists BS5 at 345 x 280 mm and R100 Martini at 345 x 271 mm, so compare the complete fixing arrangement for the chosen seat.
Is Safety Devices F044 a competition cage?
Safety Devices states that F044 is not for competition use; its Mk3 application is the 1989 to 1996 three-door without a sunroof.
Does the full F055 cage avoid the dashboard?
The shop describes a through-dashboard front section and dash bar; arrange the complete installation and check the required front, rear and door-bar parts.
Which option is the full weld-in cage?
F081, RBF081 6SXX, is the full CDS weld-in cage for the stated Mk3 three-door application; confirm installation and current event documentation with Safety Devices.
Can strap count decide the harness attachment points?
Use the selected belt maker's instructions for the actual seat and vehicle, including anchor strength, belt routing and angles; strap count alone cannot establish a suitable installation.
More help
Send Garreth the Mk3’s build year, body and roof type, and the physical seating side you need. Include the exact seat and whether you want one position or both. Cameron can check the proposed frame, upper mounting parts and restraint arrangement against those details.
Call 0115 647 8650 or use the contact link below with the specification.
Need a personal recommendation?
We're here to ensure you pick the right seat.
Contact us today.


















