Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Honda Civic EG bucket seat guide

Fifth-generation Civic: choose the kit for your exact car

A Civic EG seat conversion can use a vehicle-specific base, an adjustable side-mount kit or a BRIDE rail matched to a particular seat. Those routes include different hardware. Start with the car’s chassis code and physical seating side, then choose the upper fittings around the seat you want.

This guide brings together our fifth-generation Civic fitting listings, competition buckets, recliners and an EG6 cage option. Check the original model, body and market as well as the registration year. Planted lists the 1992-1995 Civic; BRIDE’s Japanese-market EG6 application begins in September 1991. A later registration or an engine swap does not establish the floor application.

The letters EJ also occur on later Civics. Use the full chassis code and generation when ordering, especially for a coupe or an imported car. The separate Civic EK guide covers the following family.

Honda Civic EG on track with a helmeted driver
Honda Civic EG6 on track

Mounting

Check the original seat fixing points before ordering. Corrosion, previous welding or altered seat brackets can change what a replacement assembly needs. Give us photographs of any existing modification and the intended seat model.

A base-mounted seat attaches underneath. A side-mounted shell fixes through brackets alongside the seat, and those brackets need to suit its inserts, bolt size and mounting instructions. Where separate sliders are used with side mounts, the sliders sit below the side mounts. Measure the assembled seat position with the intended driver, footwear and helmet if applicable.

Sparco and Corbeau

The Sparco EG fitting-frame listing, product 16963, specifies a 345 × 271 mm base interface. Choose the correct handed frame and confirm the seat-side runner arrangement. A 345 mm width alone does not prove the fore-and-aft holes or the assembled height match.

The Corbeau EG/EJ listing, product 14612, is the dedicated route to discuss for a Corbeau base-mounted or reclining seat. It has required choices for seating side and a sliding or tilting subframe. Confirm the actual seat and supplied mechanism together; a tilting mechanism does not turn a fixed-back shell into a reclining seat.

Corbeau’s Sprint X is a side-mounted competition shell. Its maker specifies Pro-Team side mounts and M10 12.9 fixings. Have the complete vehicle-base and side-support arrangement confirmed before choosing it for a kit designed around another support system.

Planted SB041

Planted’s SB041 application is the Honda Civic 1992-1995. The maker identifies SB041DR as physical left and SB041PA as physical right. Our shop labels SB041DR as RHD passenger and SB041PA as RHD driver. Use the physical side and SKU together.

Planted’s general application guidance defaults to US left-hand-drive cars unless stated otherwise. That baseline needs checking against a UK or other-market floor; changing the driver/passenger label does not verify an international application.

The maker offers Standard and Alternate upper patterns. Standard includes the RECARO slider pattern; Alternate substitutes the Cobra/Scheel-Mann arrangement. The shop’s SB041 selection is by side, so confirm the supplied upper pattern and the exact slider before ordering. The lower base alone does not supply a seat or a complete sliding assembly.

M2: side-mount kit, base option and paired listing

M2 lists the EG/DC2 side-mount rail as M2-20268-S000 for physical left and M2-20268-S010 for physical right. The maker describes 290 mm side-hole spacing and sliding rails. That measurement still needs to match the exact seat shell, width, inserts and supplied supports.

Our single-kit listing, 16660, has side-mount and base-mount choices for each RHD side. The maker’s standard rail is a side-mount product. For a base-mounted seat, specify the base option with us and confirm the adapter supplied; the separate M2 adaptation bars, 19431, are accessories for a compatible M2 frame. Avoid buying another adapter until the selected package’s contents are clear.

The paired M2 listing, 260085, is also available. Confirm the left/right contents and mounting specification when ordering both seats. A pair of vehicle frames still needs seats and the appropriate seat-side fittings.

M2’s catalogue labels the application “Civic 92-96 EG & DC2” and lists EG3/4/5/6/8/9, EH9 and EJ1/2. Treat that as the manufacturer’s stated application and verify the actual chassis. It does not extend an EG kit to every Civic registered in 1996.

PCI: slider kit or fixed adjustable kit

PCI’s sliding EG mount, 19525, is the route for fore-and-aft movement after installation. The manufacturer lists SM-EG-L-S1 and SM-EG-R-S1 for the 1992-1995 Civic and specifies its S1 side supports with the standard slider kit. There is no reason to add a separate universal runner to that assembly.

The adjustable fixed mount, 190177, is the alternative when the position will be set using its fitting adjustments. PCI lists SM-EG-L-A1 and SM-EG-R-A1 and specifies A1 side supports for that kit. The available adjustment and the support arrangement differ from the sliding version.

Give us the seat model and measured shell width before choosing either one. Included side supports still need approval for the seat’s mounting system; their presence does not establish compatibility with every bucket. Check any proposed harness attachment against PCI’s instructions and the harness maker’s requirements separately.

SW lower bases

The SW EG listing, 269320, offers a lower base for each RHD seating side. It names SW-SM-0103 for the driver/right side and SW-SM-0104 for passenger/left. Side mounts, sliders and the relevant bolts are separate parts or optional additions.

Specify the full upper assembly and bolt size with the seat. The listing’s “345 mm wide” description does not give a complete two-dimensional seat fixing pattern. Check the actual car and base before treating an optional harness eyebolt or backing plate as an approved anchorage.

BRIDE rails for the front-wheel-drive EG6

The BRIDE listings on this page are for EG6 SiR/SiR II/SiR-S applications. BRIDE’s current matching data is principally for cars sold in Japan and marks this EG6 application as front-wheel drive. Confirm a different body, chassis or market separately.

Each type is available as H033 on the physical right and H034 on the physical left. On an RHD car those correspond to driver and passenger respectively. Choose the complete suffix as well as the side; it identifies the seat interface.

TypeSeat interfaceMain distinction
FG, 252551Side mount; 290 ± 5 mm longitudinal × 395 mm acrossSliding rail for seats within BRIDE’s specified fit list and dimensions.
IG, 252678Side mount; 290 ± 5 × 395 mmSliding type with aluminium side stays.
FX, 252623Side mount; 290 ± 5 × 395 mmFixed competition type. Event and seat acceptance still require checking.
XL, 252845Side mount; 290 ± 5 × 430 mmWider interface for the exact XL/wide seat applications in BRIDE’s list.
MO, 252725Bottom mount; 330 × 290 or 271 × 345 mmFor its named bottom-mounted seat families.
RO, 252784Bottom mount; 260 × 405 mmFor its named seat families and required interfaces.
XR, 252898Bottom mount; 260 × 405 mmThe STRADIA II type-XL application; the same nominal hole rectangle as RO does not make their seat applications identical.

BRIDE publishes a separate compatible-seat list for each type. Its generic list and exact-car matching result must agree for the intended seat. Check the current seat revision and any required import side stays; do not choose solely from the brand name or a claimed drop in height.

Runners and adaptation hardware

The separate Sparco 0049306 runner kit, product 14036, is listed around a 345 × 271 mm base interface and is sold for one seat. Confirm both its seat-side and base-side interfaces, assembled height and adjustment clearance. A seat’s FIA label does not approve an unrelated runner installation for an event.

The Endurance runner, 21512, is another separate sliding option to discuss once the frame and seat are known. Its current listing does not provide a complete engineering drawing establishing every fixing centre. A 290 mm side-hole pitch on a bucket does not establish the bottom pattern of its side supports or runner.

Use the M2 bars only with the compatible M2 system and the exact base-mounted seat. PCI and BRIDE assemblies should follow their own instructions and supplied interfaces. Keeping each complete kit identifiable makes a later fitting check much easier.

Competition bucket seats

The Sparco Sprint, OMP TRS-E and Cobra Monaco Pro offer base and side mounting routes. Their bottom fixings differ: the current TRS-E listing gives 345 × 270 mm, the Sprint gives 345 × 271 mm, and the Monaco Pro gives 292 × 330 mm. Use the exact drawing and support system for each seat; keep the different fixing centres distinct.

The OMP Champ-R and First R, Mirco GT 3D and RS2 3D, Sparco Rev QRT and Grid Q, and Corbeau Sprint X System 3 are side-mounted choices. Compare the shell’s shoulder width and the support’s total width against the door, tunnel and available adjustment.

All ten current listings identify FIA 8855-1999 approval. Check the exact supplied seat’s label and permitted use date with your event requirements. “System 3” describes the Corbeau shell construction; it is not a separate FIA standard. Corbeau’s own Sprint X guidance specifies the side supports and fixings required for its installation.

Try the seat if possible, especially where head-support wings may limit visibility or entry. A steel or composite construction description alone does not establish a safer choice for contact or an occupant’s fit.

💬
Competition seats for the Civic EGChoosing a bucket for the Civic EG

Start by trying the seat and measuring its shell. The Sprint, TRS-E and Monaco Pro have base and side mounting routes; each needs its own exact interface checked. For a side-mounted shell, specify the prescribed supports and complete Civic kit together.

Reclining sport seats

The Auto Style BS5, JW and MS listings include sliders and specify a 345 × 280 mm base pattern. Check the supplied slider’s lower interface against the Civic frame. Budgeting for another generic runner automatically can add hardware without solving that mismatch.

The Sparco R100 Martini, R333 and R500 Fabric/Sky listings use a 345 × 271 mm base interface and are seats only. Confirm a complete frame-and-runner arrangement and check that the recline controls remain accessible beside the tunnel and door.

OMP’s RTS listing specifies 345 × 270 mm base fixing. The Cobra Misano Anniversary and Spec 2 listings specify 291 × 330 mm and require attention to the ordered base specification; the alternative base choices are not interchangeable Civic floor frames. Specify the standard or other intended seat base before matching its hardware.

These recliners are separate from the FIA competition buckets above. A “Road & Track” shop category does not establish FIA homologation, legal acceptance or suitability for a particular event. Confirm standard-belt routing, buckle position and rear access with the actual seat in the car.

💬
Reclining seats for the Civic EGChoosing a recliner for the Civic EG

The Auto Style options include sliders on a 345 x 280 mm interface. The named Sparco recliners are seats only at 345 x 271 mm. Choose the seat and complete upper fittings together, then check access to the recline controls in the car.

Roll cages

The live Custom Cages listing, 18914, is the HO/98T EG6 International Multipoint T45 weld-in kit. It matches the manufacturer’s named EG6 application. Have the exact shell and intended event checked with the cage specification before ordering.

The maker describes an FIA-certificated kit and supplies installation and certification documents. The completed cage needs to follow that process. A certificated kit name does not prove a particular installation or make it suitable for every fifth-generation Civic body.

Plan the seat, door bars, access, padding and restraint anchors together. A cage tube is not automatically a harness attachment. Ask for the installation information and proposed shoulder-belt mounting provision before deciding the seat position.

Harnesses

Choose the anchors with the seat and harnessFollow the exact harness maker's routing and fitting instructions. Check the vehicle anchorages and event requirements before choosing a bar or cage provision.

Choose the harness as part of the seat and anchorage installation. Point count alone does not decide whether a cage is required or whether existing anchorages are suitable. The harness maker’s routing, end fittings, seat openings and approved use all need to match the completed car.

The TRS Clubman 3-point bolt-in, 14211, and Clubman 4-point clip-in, 14212, are different layouts. The three-point uses a combined rear shoulder attachment; the four-point uses separate rear attachments. A four-point designation does not include a crotch strap. TRS’s road instructions describe specified factory-belt anchor locations and require suitable loading and alignment; have those checked on the actual car.

The Clubman products and Magnum four-point listing are marked as unsuitable for HANS use. The TRS Magnum 4-point, 14217, is listed to FIA 8854-1998. The Magnum 6-point Superlite, 17148, is listed to FIA 8853-2016 and needs the appropriate anti-submarine strap routing and anchorages. Check the exact label, required event standard and FHR requirements.

Takata Drift II, 17344, and Drift III, 17348, are both four-point products in these listings. Their shoulder strap widths differ. Neither should be presented as the six-point competition alternative, and the listings mark both as unsuitable for HANS use.

The Schroth Profi 3×2, 19736, is a six-point racing harness listed to FIA 8853-2016. Follow Schroth’s competition instructions for the exact model and end fittings. Its racing application must not be described as a general road restraint; confirm the exact variant and permitted use.

For a shared road and track car, discuss how the original three-point belt, buckle and any sensors will be retained and routed. Avoid attaching belts to a seat bracket merely because a hole or an optional eyebolt is present. Ask the installer to verify the complete anchorage design.

What fits

Match the exact seat and supplied fixing system to the Civic kit. A listed approval concerns the product; the completed installation and the actual label must meet the intended use and event requirements.

SeatMountingCurrent listed approvalWhat to specify
Competition bucket seats
Sparco Sprint FIA Motorsport Bucket SeatBase Mount, Side mountFIA 8855-1999Seat only; 345 x 271 mm base or the specified side supports.
OMP TRS-E Velour FIA Motorsport SeatBase Mount, Side mountFIA 8855-1999345 x 270 mm base listed; verify exact drawing and chosen supports.
Cobra Monaco Pro FIA Motorsport Bucket SeatBase Mount, Side mountFIA 8855-1999Seat only; 292 x 330 mm base or a suitable side-mount system.
OMP Champ-R Fibreglass FIA Motorsport SeatSide mountFIA 8855-1999Seat shell and its prescribed side mounts.
OMP First R Fibreglass FIA Motorsport SeatSide mountFIA 8855-1999Seat shell and its prescribed side mounts.
Mirco GT 3D Fabric FIA Motorsport SeatSide mountFIA 8855-1999Side supports and shell clearance; colour choices do not prove fit.
Mirco RS2 3D Fibreglass FIA Motorsport SeatSide mountFIA 8855-1999Side supports; allow room for the lateral head-support wings.
Sparco Rev QRT FIA Motorsport Bucket SeatSide mountFIA 8855-1999Seat only; prescribed side supports and Civic lower assembly.
Sparco Grid Q FIA Motorsport bucket seatSide mountFIA 8855-1999Seat only; prescribed side supports and Civic lower assembly.
Corbeau Sprint X System 3 FIA Motorsport Bucket SeatSide mountFIA 8855-1999FIA 8855-1999; System 3 is shell construction. Corbeau Pro-Team mounts/M10 12.9.
Reclining sport seats
Auto Style Type BS5 Reclining SeatBase MountNo FIA competition approval establishedIncludes sliders; 345 x 280 mm listed. Check slider lower interface.
Auto Style Type JW Reclining SeatBase MountNo FIA competition approval establishedIncludes sliders; 345 x 280 mm listed. Check slider lower interface.
Auto Style Type MS Reclining SeatBase MountNo FIA competition approval establishedIncludes sliders; 345 x 280 mm listed. Check slider lower interface.
Sparco R100 Martini Racing Reclining Sport SeatBase MountNo FIA competition approval establishedSeat only; 345 x 271 mm base.
Sparco R333 Reclining Sport SeatBase MountNo FIA competition approval establishedSeat only; 345 x 271 mm base.
Sparco R500 Fabric Reclining Sport SeatBase MountNo FIA competition approval establishedSeat only; 345 x 271 mm base.
Sparco R500 Sky Reclining Sport SeatsBase MountNo FIA competition approval establishedSeat only; 345 x 271 mm base.
OMP RTS Reclining Sport SeatBase MountNo FIA competition approval established345 x 270 mm base listed; verify exact drawing.
Cobra Misano Anniversary Reclining Sport SeatBase MountNo FIA competition approval establishedSeat only; required base specification; 291 x 330 mm standard pattern.
Cobra Misano Anniversary Spec 2 Reclining Sport SeatBase MountNo FIA competition approval establishedSeat only; required base specification and side; 291 x 330 mm standard pattern.

Common questions

Check the full chassis and generation. EJ occurs in fifth-generation coupe applications and on later Civics. A product’s exact application must match the car; the letters alone are insufficient.

The catalogues use different application dates and markets. BRIDE lists its Japanese-market EG6 from September 1991, while Planted lists the Civic 1992-1995. Match the maker’s exact application and original chassis.

It does not identify the floor by itself. M2 uses a “92-96 EG” description, but later Civics have separate applications. Send the chassis code, body and original market with the registration.

Physical left, called driver by Planted and RHD passenger in our shop. SB041PA is physical right and the shop’s RHD driver option. Confirm the market-specific floor as well as the side.

The maker says Standard includes the RECARO slider pattern; Alternate substitutes the Cobra/Scheel-Mann arrangement. Confirm the exact slider and which version the supplied shop bracket has.

The PCI sliding assembly includes its slider system and specified S1 side supports. Choose the handed kit and confirm seat compatibility before adding hardware.

It is adjusted through its installation hardware. Choose the separate PCI sliding assembly if fore-and-aft movement after installation is required.

Confirm the selected package with us. The shop has base and side options, while M2’s standard rail is designed for side mounting. Add separate bars only once the actual supplied base conversion is clear.

The paired M2 listing is available for this EG/DC2 family. Confirm the left and right assemblies and the upper fittings together; seats are separate.

For this EG6 family H033 is physical right, the RHD driver side; H034 is physical left. The suffix must also match the required rail type and exact seat.

BRIDE’s current matching result concerns the front-wheel-drive EG6 and its catalogue is principally for cars sold in Japan. Have other chassis, bodies or market floors confirmed separately.

They have different listed seat applications. Use BRIDE’s exact seat and vehicle results alongside the fixing dimensions.

The current Auto Style products specify 345 × 280 mm, compared with 345 × 271 mm for the named Sparco recliners. Cobra and OMP options also need their own exact interface checked.

The listed BS5, JW and MS include sliders. Confirm the supplied slider’s lower holes against the chosen Civic base before buying more hardware.

It is a shell-construction designation. The current Sprint X System 3 listing and maker’s Sprint X specification identify FIA 8855-1999; check the actual label and prescribed side supports.

The current Drift III listing is four-point, as is Drift II. A six-point racing installation needs its own suitable harness, seat openings and anchorage arrangement.

A standard four-point layout has four vehicle attachments and does not establish that a crotch strap is supplied. Check the exact product and instructions; use a specified six-point system where required.

Point count alone cannot approve an installation. Follow the restraint maker’s anchorage and routing requirements and the event’s roll-protection rules. A random cage tube or harness bar does not establish suitable attachment points.

The live product is 18914, HO/98T for the EG6, in T45 with weld-in multipoint construction. Verify the exact shell and the kit’s installation and certification requirements.

Send the full chassis code, body, year and original market; RHD or LHD and physical side; the exact seat and intended use. Include any existing runner or frame part numbers and photographs of altered floor mounts.

More help

Send the seat model and chassis details together through our contact page or call 0115 647 8650. We can work through the floor base, upper supports, adjustment and restraint arrangement before the order is placed.

Back to the Car Seat Selector guide.

Manufacturer fitting information: Planted application guide and FAQ; BRIDE matching and rail specifications; M2 Honda rail catalogue; PCI slider and adjustable specifications; Corbeau Sprint X; Custom Cages EG6 HO/98T; TRS instructions; Schroth instructions.

Need a personal recommendation?

We're here to ensure you pick the right seat. Contact us today.
Our showroom virtual walk through!
Have a walk around our showroom before you even buy your new seats. 
Our hands on experience, is what allows us to bring you our recommendations.
Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text