Call Garreth, Cameron & CallyAI: 0115 9893488

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Useful Links
Your Account

Talk to us

Garreth, Cameron & CallyAI · Mon to Fri
Call 0115 989 3488Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, CallyAI
Today On: 0115 9893488
Click Here For Our Contact Form

 

 

BMW M2 bucket seat guide

2016 to 2021

The M2 is the car that reminded people what a small BMW is supposed to feel like, and it gets used accordingly. A large share of the ones we sell seats for are doing regular track days rather than sitting in a collection.

Everything you need exists for it. Five makers list a frame under the M2 name, both mounting routes are covered, and Custom Cages make two kits, which is more than any other 2 Series can say.

One thing that confuses people before they order. The M2 is also catalogued under its chassis code, F87, and those are the same parts for the same car. They are now priced the same under both names, so whichever listing you land on, you are paying the same money.

BMW M2 (F22) on track with a helmeted driver
The M2 on a trackday

The frames

PCI make the sliding sub frame, which keeps the seat moving fore and aft after it is fitted. That suits an M2 that is driven to the circuit rather than towed to it, which is most of them. OMP, Planted, Recaro and Corbeau make direct fit base mount frames, which sit lower and set the position once.

One thing to know before you search. This car is catalogued under two names, M2 and F87, because the makers list by model name or by chassis code depending on the maker. Both sets of frames are the same physical parts for the same car, and they carry the same prices, so it makes no difference which listing you order from.

If you have found a frame under one name and not the other, that is why. Tell us the maker you want and we will find it whichever name it is filed under.

M2 and F87 are the same carF87 is the M2 chassis code, so both sets of listings cover your car and both are priced the same. If the maker you want only appears under one of the two names, that is a cataloguing quirk rather than a fitment difference. Ask us and we will sort it.

Fixed back competition seats

Eight shells, all needing side mount brackets to pick up on the frame.

The Sparco Circuit II QRT is the roomiest at a 40in waist and all driver heights. The Mirco RS2 is listed for all heights too. The Recaro Pole Position Carbon ABE is the expensive end of the page, and the Corbeau Sprint X and Revenge X are the value FIA shells.

Reclining and dual fitment seats

Plenty of M2s stay usable cars, and these are the seats that keep them that way while fixing the support.

Two of them mount either way. The Sparco Sprint carries FIA 8855-1999 and is listed for base or side mounting, which makes it the least expensive approved seat on this page by a distance. The Cobra Monaco Pro is the other dual fitment option. The Recaro Sportster CS lists no waist restriction and comes in a heated version.

💬
Our picksThe Sparco Sprint is the value answer, again

FIA approved, mounts either way and cheaper than anything else approved on this page, which makes it hard to argue with on a road M2 that does track days. If the car is properly built, a fixed back shell on the PCI sliding sub frame is the setup. Cameron works out the fit and the combination for a given car, so send your height and waist.

Harnesses

The standard belt is right on the road and works with everything here. On circuit the harness is what keeps you still enough to stop bracing on the wheel.

The shoulder straps need a solid anchor behind you at or above shoulder height, which on this car means one of the cages below or a harness bar. Tell us what is going in and we will match the belts to it.

💬
Our recommendationsDated belts only where the rules require them

The TRS Clubman belts cover fast road and trackday use and never need renewing. The Magnum 6 point Superlite and the Schroth Profi carry FIA dates, which is what a series that asks for them wants. Send us the class and we will confirm which applies.

Roll cages

Custom Cages make two kits for this car. A six point national spec kit in CDS steel, which is the club and trackday answer and gives you the harness anchor, and a multipoint kit in T45 for a full competition build.

Check what your championship asks for before choosing, because the regulations name the specification rather than leaving it open.

What fits what

Waist, height and approval are from each product listing. Where a listing does not state a figure the table says so.

SeatMountingWaistHeightApproval
Corbeau Revenge X System 1Side mount32in to 36inUnder 6ftFIA 8855-1999
Corbeau Sprint X System 1Side mount32in to 36inUnder 6ftFIA 8855-1999
Mirco RS2 3DSide mount32in to 36inAll heightsFIA 8855-1999
OMP RS-PT 2Side mount32in to 36inUnder 6ftFIA 8855-1999
OMP Champ-RSide mount32in to 36inUnder 6ftFIA 8855-1999
Recaro Pole PositionSide mount32in to 36inUnder 6ftFIA 8855-1999
Recaro Pole Position Carbon ABESide mount32in to 36inUnder 6ftRoad and track
Sparco Circuit II QRTSide mount32in to 40inAll heightsFIA 8855-1999
Cobra Monaco ProBase or side mount32in to 36inUnder 6ftFIA 8855-1999
Sparco SprintBase or side mount32in to 36inAll heightsFIA 8855-1999
Corbeau SVR Vinyl (pair)Base mount32in to 38inAll heightsRoad and track
Corbeau Sportline RRS (pair)Base mount32in to 38inAll heightsRoad and track
Recaro Sportster CSBase mountAll sizesAll heightsRoad and track
Recaro Sportster CS with heatingBase mountAll sizesAll heightsRoad and track
Sparco R100 Martini RacingBase mount32in to 36inAll heightsRoad and track
Sparco R500 SkyBase mount32in to 38inAll heightsRoad and track

Questions about fitting seats in a BMW M2

Either, because they are the same part at the same price. F87 is the M2 chassis code and both sets of listings cover your car. The only reason both exist is that some makers catalogue by model name and some by chassis code, so between them the two pages cover every maker.

Yes. The Competition and the CS are both F87 cars, so the same frames apply. If you want it confirmed against your specific car, send us the registration.

The Sparco Sprint. It carries FIA 8855-1999, it mounts either base or side, and it is the least expensive approved seat on this page. On a road M2 that does track days it is very hard to beat.

Yes, with the PCI sliding sub frame, which keeps the fore and aft travel. The direct fit frames from OMP, Planted, Recaro and Corbeau are the base mount route and set the position once, which sits the seat lower.

Yes, two. Custom Cages make a six point national spec kit in CDS and a multipoint kit in T45. Both are listed under the M2 F87 name. The six point is the usual trackday choice and gives you the harness anchor.

Need a personal recommendation?

We're here to ensure you pick the right seat. Contact us today.
Our showroom virtual walk through!
Have a walk around our showroom before you even buy your new seats. 
Our hands on experience, is what allows us to bring you our recommendations.

What's the best FIA bucket seat for a BMW M2?

The Sparco Sprint is the pick here. It carries FIA 8855-1999 approval, mounts either base or side so it works with more subframe options, covers all heights, and is the least expensive FIA-approved seat on the page. If you want more lateral support for serious circuit driving, step up through the Corbeau Sprint X or OMP Champ-R to the Recaro Pole Position Carbon at the premium end.

All the fixed-back shells need side-mount brackets, so check that is covered before you order. PCI’s sliding subframe keeps the seat adjustable fore and aft, where the direct-fit base mounts from OMP, Planted, Recaro and Corbeau set the position once.

Free UK Shipping

On all orders above £100

In-Store Shopping

Try before you buy

Easy Delivery Tracking

Aftership Tracking Updates