Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Which Seats Fit M2 Motorsport Vehicle Specific Seat Frames?

M2 Motorsport frames are built for one car each, and the question we hear most about them is which seats they take. Side mounted bucket seats bolt straight on, because the frame comes with its side mounts. Base mount reclining seats on a 345mm pattern go on the base mount version, which carries adapter bars across the frame. A handful of extra wide shells are the only seats that will not fit.

  • Photos of the real frames and of customer cars
  • Seat by seat, with the exceptions named
  • Product cards show live prices
An OMP RT bucket seat fitted to a blue Nissan 350Z on an M2 Motorsport direct fit sub-frame, seen through the window
An OMP RT on an M2 Motorsport frame in a customer's Nissan 350Z.
The short answer

Standard and large side mount seats fit. The extra wide shells do not.

The side mounts come with the frame, so you only need the frame and the seat.

290mmSide mount hole spacing on the frame
345mmBase mount pattern the adapter bars take
2Routes: side mount, or base mount with bars
3Extra wide seats that do not fit

What comes with an M2 frame

An M2 Motorsport frame is a vehicle specific sub-frame. It bolts to your car’s own seat mounting points, so nothing is drilled into the floor and the original seat can go back in later. The side mounts are fitted to the frame as standard, and the top carries 290mm side mount holes. A side mount bucket seat bolts straight to it.

That makes the frame and the seat the whole job. There are no separate side mounts to buy. Frames are handed, so you choose the driver or passenger side, and a pair of seats takes two frames.

  • Made for one car, bolted to the factory seat mounting points with no floor drilling
  • Side mounts fitted as standard, with 290mm side mount holes on top
  • Handed, so you choose the driver or passenger side
An M2 Motorsport seat frame with its side mounts fitted as standard
An M2 Motorsport frame as it arrives, with the side mounts already on it.
M2 frames for your car

Find the frame for your car

Every car below has its own M2 frame. Open yours, then choose the driver or passenger side and the side mount or base mount version on the listing.

Swipe or scroll sideways to browse every car

How it goes together

Two routes onto the same frame

Every M2 frame carries its seat one of two ways. A seat with side mounting points on the shell takes the side mount frame, which already has its side mounts on it.

A reclining seat on a 345mm base takes the base mount version. The same frame, with adapter bars across the top.

  • Side mount frame: the standard and large side mount shells
  • Base mount frame with bars: reclining seats on a 345mm pattern
Side mount seatReclining seat on a 345mm baseCar floor mounting pointsthe factory seat boltsM2 frameside mounts fitted as standardSide mount bucket seatstandard or large shellCar floor mounting pointsthe factory seat boltsM2 base mount framefor your carAdapter bars across the frame345mm bolt patternBase mount reclining seatSparco R100, R500, Corbeau RRS, PSR
Side mount seats go straight onto the frame. Base mount reclining seats on a 345mm pattern use the base mount version with adapter bars across it.

The side mount seats that fit

The frame takes every standard and large side mounted fibreglass or steel bucket seat we know of. That runs from the Sparco Sprint and the Cobra Monaco Pro through to the OMP RT and the Mirco RTX-7, and it covers the many seats in between that share the same side mount layout. Standard and large here means the usual shell sizes, and the large size where a seat comes in one.

Side mount seats

Seats that bolt straight onto the frame

Fibreglass and steel shells from Sparco, OMP, Mirco, Cobra, Recaro, Corbeau, Momo and Sabelt, all on the standard side mount layout. Scroll sideways to see them all.

Swipe or scroll sideways to browse the seats

SeatMountingOn an M2 frame
Sparco SprintSide mount, base mount also availableFits on the frame's side mounts
Cobra Monaco ProSide mountFits on the frame's side mounts
OMP RTSide mountFits on the frame's side mounts
Mirco RTX-7Side mountFits on the frame's side mounts
Sparco Sprint LSide or base mountShell too wide for the frame
OMP TRS-E XLSide mountShell too wide for the frame
OMP WRC-R XLSide mountShell too wide for the frame

Product cards show prices excluding VAT. Prices in the text include VAT.

The extra wide seats that need another frame

Three seats are too wide: the Sparco Sprint L, the OMP TRS-E XL and the OMP WRC-R XL. The shell is wider than the gap between the frame’s side mount bolt points, so the seat cannot sit down between them. The frame is for standard and large size side mounted seats.

If you have one of these seats, tell us the car and the seat and we’ll match a frame that suits it. For the Sprint L, our guide Will the Sparco Sprint L work with M2 rails? walks through the route we used for a Civic FN2.

Standard or large shellSits between the boltsgap between the side mount bolt pointsExtra wide shellToo wide for the gapgap between the side mount bolt points
Schematic, not to scale. The frame is a fixed width, so the shell has to be narrower than the gap between its side mount bolt points.

Reclining seats: the frame with adapter bars across it

A reclining seat mounts through its base, so it needs a different top to the frame. We sell the M2 frames with base mount adapter bars across them. Pick Base Mount instead of Side mount at the top of the frame’s listing and the bars come with it.

The bars give a 345mm wide bolt pattern, so the base mount version suits every reclining seat on that pattern. That includes the Sparco R100 and R500, and some Corbeau seats, including the RRS and the PSR.

345mm base mount seats

Reclining seats that sit on the adapter bars

Sparco and Corbeau reclining seats on the 345mm bolt pattern.

Bolt pattern

Recaro base mount seats and any other base mount seat on the wider 405mm pattern do not suit the bars. They are not designed to work with them, and the seat will not go on. Tell us the seat and the car and we’ll point you to the frame that does.

SeatBase mount patternOn the base mount frame
Sparco R100345mmFits on the adapter bars
Sparco R500345mmFits on the adapter bars
Corbeau RRS345mmFits on the adapter bars
Corbeau PSR345mmFits on the adapter bars
Recaro base mount seats405mmNeeds a different frame
Any base mount seat with a 405mm pattern405mmNeeds a different frame

The Sparco R100 and R500 are on Sparco's 345mm x 271mm pattern. Details come from the live listings.

345mmBase mount pattern of the Sparco R100 and R500 and the Corbeau RRS and PSR405mmWider pattern, such as Recaro base mount seatsThe adapter bars take this widthThe bars are not made for this width
Both widths drawn to the same scale. Seats on the 405mm pattern need a different frame.

Seeing them fitted

These are customer cars and showroom photos from our gallery, with seats sitting on M2 Motorsport frames. Our Customer Builds page has more cars, and our guide How to fit Sparco and Corbeau reclining seats to an M2 Motorsport frame shows the base mount version going together step by step.

Common questions

No. The side mounts come fitted to the M2 frame as standard, so a side mount bucket seat bolts straight onto it. You need the seat and the frame.

Every standard and large size side mounted fibreglass or steel bucket seat we know of, from the Sparco Sprint and the Cobra Monaco Pro through to the OMP RT and the Mirco RTX-7.

The Sparco Sprint L, the OMP TRS-E XL and the OMP WRC-R XL. Their shells are wider than the gap between the frame’s side mount bolt points. Send us the car and the seat and we’ll find a frame that suits.

Yes, if its base mount pattern is 345mm. Choose the base mount version of the frame, which comes with adapter bars across it. That covers the Sparco R100 and R500 and Corbeau seats such as the RRS and the PSR.

No. Recaro base mount seats use a wider 405mm pattern, and the adapter bars are not designed for it. The same goes for any other base mount seat on 405mm.

Corbeau’s side mount seats now use M10 fixings, and the side mounts on an M2 frame are drilled for M8. The holes need drilling out slightly for M10, which is a small modification. Corbeau reclining seats on a 345mm base, such as the RRS and PSR, use the base mount frame with the adapter bars.

For a left hand drive car choose the left frame, which is listed as RHD Passenger Side. A pair of seats takes two frames, one for each side.

What we would buy

G

Garreth

Garreth's top tip

Look at how the seat mounts before anything else. If it has side mounting points on the shell, the standard M2 frame is the whole job, with the side mounts already on it.

If it's a reclining seat on a 345mm base, the base mount frame with the adapter bars does it just as neatly.

C

Cameron

Cameron's fitting view

I check two things on the seat. On a side mount seat it's whether the shell sits between the frame's bolt points, which every standard and large shell does. On a reclining seat it's the width of the bolt pattern underneath, and 345mm is the one the bars take.

If it's a Sprint L, TRS-E XL or WRC-R XL, or a 405mm base, send me the car and I'll tell you the frame to use.

Not sure your seat fits an M2 frame?

Tell us your car and the seat you have in mind. Cally, our digital receptionist, takes your details, and Cameron comes back to you with the frame that suits before you order.

Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text