Two Mirco GT seats in black 3D SpaceTech, 638 for the pair. Fibreglass, fixed back, side mount, FIA 8855-1999, four or six point harness compatible, HANS friendly, no head support, black shells, for 32 to 36 inch waists and drivers under six feet. Four pairs sold, seven photographs.
Plain black, twice
No colour, no stitching, just the entry Mirco bucket in black mesh for both seats. At 638 it is ten under two singles, with mesh from the same roll in one order. The black and blue version of this pair is listed at 593, so if a blue panel does not offend you, that page is 45 cheaper for the same two shells.
Why the mesh
3D SpaceTech is the trim that lets air through. In a car that sits in the sun between sessions it is the difference between a seat you climb into and one you put up with.
Everything the label says
Homologated to FIA 8855-1999, each seat with its own date. Four or six point belts, six with a HANS. Shell height noted for drivers under six feet. Side mount, so the order needs two sets of side mounts and a frame for the car as well; pick the driver’s and passenger’s side at the basket and tell us the model.
Will I fit in this seat?
The maker sizes this seat for drivers under 6ft in height with a 32in to 36in waist. Those are the paper numbers; how a seat actually feels to sit in and climb out of is a different question, and our showroom team sit in these seats every day, so call us with your height and waist and we will give you the honest answer.
Is it FIA approved, and for how long?
Yes, it carries FIA 8855-1999 homologation. Every FIA seat has a not-valid-after year printed on its homologation label, and that label date is what a scrutineer checks, so look at the label on the seat you receive and check it against your championship regulations. Buying new means you get the freshest label the maker currently produces.
What do I need to fit it to my car?
This is a side-mount seat: it hangs between side brackets, the motorsport-style stack with fine height and angle control. You will need the car-specific frame, and a sliding runner if you want fore-and-aft adjustment. Our guide on base mount versus side mount walks through the whole stack, and tell us your car and we will quote the full kit.
Does it work with harnesses and a HANS device?
The shell takes 4 point compatible and 6 point compatible. If you are planning the full seat, harness, and HANS setup, tell us the car and we will spec it end to end.
How do I know it will feel right, not just fit on paper?
Fair question, because makers publish widths and weights, never feel, and two seats with identical numbers can feel nothing alike in the car. We keep the ranges on display in the Nottingham showroom, you are welcome to come and sit in them, and if you cannot get to us, call and describe your build, as the team sit in these seats every day. Our head support measurements guide shows the kind of real-world data we collect.
