Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

VW New Beetle Bucket Seat Guide

The VW New Beetle (1998 to 2010)

There are three different ways to bolt a seat into a New Beetle, and each one accepts a different range of seats. That is worth understanding before you fall for a particular shell, because on this car the frame and the seat have to be chosen together.

This page covers the New Beetle, the rounded car built from 1998 to 2010 on the Mk4 Golf floor. The flatter Beetle that replaced it in 2011 is a different chassis on a different platform and takes different kit, and there is a separate guide for the A5.

Which of the three frames suits you comes down to the seat you want more than it does to the car. I am Cameron, and matching those two up so they actually bolt together is the part of this I look after.

VW New Beetle, the 1998 to 2010 car, lightly modified on a race circuit
The New Beetle, built 1998 to 2010 on the Mk4 Golf floor. The flatter A5 Beetle that replaced it takes different kit entirely.

Three frames, and the seat decides which

All three bolt to the car’s original floor mounting points in place of the standard runners. What separates them is what they will accept on top.

⚙

Planted, the flexible one

Planted list frame SB027 for the Mk4 chassis Beetle, Golf, GTI and Jetta. The seat mounts to it either straight down onto the frame or on side mounts, so this is the one that leaves both routes open and takes seats from any brand.

◫

Sparco, and more than just Sparco

Sold as a Sparco frame, and Sparco seats are the obvious pairing, but base mount seats from Sparco, OMP and Corbeau all share the same bolt pattern, so any of the three will go on it. Base mount only, universally handed, and it needs the Sparco sliding runners with it.

◫

Recaro, Recaro seats only

This one really is brand specific. Recaro state their sub-frames fit Recaro seats only, and that correct fitment cannot be guaranteed with another manufacturer’s seat. Base mountable bucket and reclining seats, not side mounted ones without adaption bars.

Check which Beetle you have before orderingTwo very different cars are called Beetle here. This page is the New Beetle, 1998 to 2010, which Planted list as the Mk4 chassis for 1999 to 2005. The A5 Beetle from 2011 sits on the later Mk5 and Mk6 floor and takes the SB029 frame instead. The two are not interchangeable. If you are not certain which you have, send us the registration and we will check it.

Side mount or base mount

If you go the Planted route you still have this decision to make. The Sparco and Recaro frames make it for you, because both are base mount.

☰

Side mount

A competition shell bolts to brackets on each side, and those bolt to the frame. It is what most FIA shelled seats are designed around. On this car it means the Planted frame plus a set of side mounts, because the Sparco and Recaro frames do not take side mounted seats without adaption bars.

◫

Base mount

The seat bolts down through its own base. Reclining sport seats are almost all base mount, and plenty of steel framed buckets offer it too. All three frames take a base mount seat, so this route keeps every option open.

Bucket seats for the New Beetle

A spread across the brands we stock and across price points. The mounting column in the fit table below is the one to read first on this car, because it tells you which of the three frames a seat can go on.

💬
Our picks, not the whole listThese are a starting point, not the limit

We stock a great deal more than fits on one page, and on a car where the frame and the seat go together it is worth a conversation. Tell us which frame you are leaning towards and roughly how tall you are, and we will narrow it down.

Reclining seats for the New Beetle

For a car still doing road miles, a reclining sport seat holds you far better than the original without a fixed back shell. All base mount, so any of the three frames will take them, subject to the Recaro frame taking Recaro seats only.

Driver fit at a glance

Straight from each manufacturer’s published figures. Where a figure has not been published the cell says so rather than us filling in a guess.

SeatMountingWaistDriver heightShellApproval
OMP
OMP TRS-E VelourBase or side mount28in to 36inUnder 6ftSteel frameFIA 8855-1999
OMP TRS-XBase or side mount28in to 36inOver and under 6ftSteel frameFIA 8855-1999
Cobra
Cobra Monaco SportBase or side mount32in to 36inUnder 6ftSteel frameRoad and track
Cobra ClubmanBase Mount32in to 36inUnder 6ftSteel frameRoad and track
Cobra Monaco ProBase or side mount32in to 36inUnder 6ftSteel frameFIA 8855-1999
Cobra Monaco 40th EditionBase or side mount32in to 36inUnder 6ftSteel frameFIA 8855-1999
Sparco
Sparco SprintBase or side mount32in to 36inAll heights suitableSteelFIA 8855-1999
Sparco Sprint SkyBase or side mount32in to 36inUnder 6ftSteel frameFIA 8855-1999
Sparco Rev QRTSide mount32in to 36inAll heights suitableFibreglassFIA 8855-1999
Sparco Evo XL QRTSide mountNot publishedNot publishedFibreglassFIA 8855-1999

Harnesses

Four, five and six point belts. What you can run comes down to what there is behind the seat to mount the shoulder straps to, so settle the seat first and the belts after it.

💬
Our recommendationsMounting points decide the belt, not the other way round

Shoulder strap mounting is the whole question with harnesses and it is not the same on every build. Send us a photo of what is behind the seats and we will tell you what will work.

Common questions about New Beetle seats

Three are listed. Planted Technology frame SB027, which Planted list for the Mk4 chassis Beetle, Golf, GTI and Jetta. A Recaro direct fit sub-frame. And a Sparco direct fit sub-frame. The Planted frame takes seats from any brand. The Sparco frame takes base mount Sparco, OMP and Corbeau seats, which all share the same bolt pattern. The Recaro frame takes Recaro seats only.

No. The A5 Beetle from 2011 sits on the later Mk5 and Mk6 floor and takes the Planted SB029 frame instead. There is a separate guide for the A5. Check the year of your car before ordering.

Yes, on the Planted frame with a set of side mounts. The Sparco and Recaro frames are both base mount only and will not take side mounted seats without adaption bars, so if a shelled competition seat is the goal, the Planted frame is the one to start from.

Yes. Base mount seats from Sparco, OMP and Corbeau all share the same bolt pattern, so any of those three will bolt to it. The Recaro frame is the genuinely brand specific one: Recaro state theirs fits Recaro seats only and that fitment cannot be guaranteed with another make.

Yes. Sparco list their sub-frames as requiring the Sparco sliding runners with them. The runners are on this page. The frames themselves are universally handed, so the same part suits either side.

Start from the frame. If you want a shelled competition seat, go Planted and side mounts and the choice opens right up. If you want a base mount Sparco, OMP or Corbeau, the Sparco frame suits all three. If you want a Recaro, its own frame is the neatest fitment. Tell us which way you are leaning and we will shorten the list.

The other Beetle

If your car is the later one, or you are not certain which of the two you have, this covers it.

Need a personal recommendation?

We're here to ensure you pick the right seat. Contact us today.
Our showroom virtual walk through!
Have a walk around our showroom before you even buy your new seats. 
Our hands on experience, is what allows us to bring you our recommendations.
Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text