Toyota Yaris Mk2 bucket seat guide
XP90, 2005 to 2011
Planted Technology confirm a bracket for this exact generation, 2005 to 2011, base mount. Every bucket seat on this page is side mount, so a pair of side mounts on top of the bracket is the standard route, and the FIA range for this small car is wider than you might expect.
No roll cage is currently confirmed specifically for the Mk2. We are not going to point you at a cage listed for the Mk1 or Mk3 on the strength of the model name matching, since they are different chassis.
- Planted bracket is confirmed for the Mk2, 2005 to 2011, £222.60, base mount
- No roll cage is currently confirmed specifically for the Mk2. Ask us before assuming a Mk1 or Mk3 cage will fit
- The Corbeau Sprint X System 5 Vinyl XL at £978.00 is the widest and most substantial FIA seat here
- The Cobra Suzuka T Pro-Fit is listed for a narrower 28in to 32in waist and all heights
- All FIA harnesses carry a stamped expiry date that ends their competition life regardless of wear
- The standard rear seat belt mounts are not rated for harness shoulder strap loads
The fitting bracket
Planted Technology confirm a bracket for the Mk2, 2005 to 2011, at £222.60 per seat, base mount. It bolts to the factory floor mounting points. Every bucket seat on this page is side mount, so a set of side mounts on top of the bracket is needed.
The fitting kit
The bracket is priced per seat.
- Planted Technology bracket, £222.60 per seat, Mk2 2005 to 2011, base mount
- Sparco FIA Steel Side Mount Brackets, £90.00 fits Sparco, OMP, Cobra and Sabelt side-mount seats
- Sparco Sliding Runner Kit, £41.94 per seat, 345mm x 271mm bolt pattern
-
From £222.60 Incl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
FIA competition bucket seats
Every seat here carries FIA 8855-1999 homologation. The Cobra Monaco Pro at £235 is the cheapest FIA shell. The OMP Champ-R at £381.60 and the Mirco GT 3D Fabric at £324 sit in the middle. The Cobra Suzuka T Pro-Fit at £673.20 is listed for a narrower 28in to 32in waist, while the Corbeau Sprint X System 5 Vinyl XL at £978.00 sits at the top of the range and is the biggest shell here.
-
From £282.00 Incl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £388.80 Incl. VATPayPal Credit250+ coloursKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £673.20 Incl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £978.00 Incl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £524.10 Incl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Reclining sport seats
For a Yaris doing daily miles, a reclining seat is still side mount on this bracket. The Sparco R100 and R100 Martini Racing sit on the 345mm x 271mm bolt pattern, matching the Sparco runner above. The Auto Style Type BS5 and Type RS6-II Fabric round out the range at a lower price point.
-
From £306.00 Incl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £282.00 Incl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
💬
Our recommendationTell us your build before ordering the seat
With no cage confirmed for this generation, the seat question comes down to how the car is used. Cameron works out the fit and the best combination for a given car, so tell him your height, build and intended use, and he will narrow the list.
Harnesses
There is no harness made specifically for the Yaris Mk2, so you are fitting a universal belt and working out the mounting yourself. The standard rear seat belt mounts are not rated for harness shoulder strap loads, so a bolt-in harness bar or a fabricated anchor point is needed, since no cage is currently confirmed for this generation.
The Schroth Profi 3×2 at £370 and the TRS Magnum 6 Point Superlite at £294.00 are both FIA 8853-2016. The TRS Magnum 4 Point at £139 is FIA 8854-1998. All three carry a stamped expiry date regardless of wear. For a road or trackday car, the Takata Drift II and III and the TRS Clubman belts cost less, though none of those four are HANS compatible.
-
From £444.01 Incl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £294.00 Incl. VATPayPal CreditAmazing valueSelect options This product has multiple variants. The options may be chosen on the product page
-
From £246.00 Incl. VATPayPal CreditAmazing valueSelect options This product has multiple variants. The options may be chosen on the product page
-
From £274.80 Incl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £324.00 Incl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £120.00 Incl. VATPayPal CreditAmazing valueSelect options This product has multiple variants. The options may be chosen on the product page
-
From £96.00 Incl. VATPayPal CreditAmazing valueSelect options This product has multiple variants. The options may be chosen on the product page
💬
Our recommendationConfirm the anchor before the belt
With no cage confirmed for this generation, tell us what is behind the seats now and whether a head restraint is going in, and we will tell you what the shoulder straps can anchor to before you spend anything on the belt.
Roll cages
No roll cage is currently confirmed specifically for the Mk2. The OMP cages listed under the Yaris name in the catalogue are titled MK1 and MK3, different generations to this one, and we are not going to sell you one on the strength of the model name matching. If you need a cage for the Mk2, ask us and we will check with the cage makers whether anything is planned for it.
What fits what
All seats below fit the Mk2 on the Planted bracket, with side mounts added. Where a cell says not listed, the manufacturer has not published that figure.
| Seat | Mounting | Approval | Driver height | Waist | HANS |
|---|---|---|---|---|---|
| Competition bucket seats | |||||
| Cobra Monaco Pro | Base or side mount | FIA 8855-1999 | Under 6ft | 32" to 36" | HANS friendly |
| OMP Champ-R | Side mount | FIA 8855-1999 | Under 6ft | 32" to 36" | HANS friendly |
| Sabelt GT3 | Side mount | FIA 8855-1999 | All heights | 32" to 36" | HANS friendly |
| Mirco GT 3D Fabric | Side mount | FIA 8855-1999 | Under 6ft | 32" to 36" | HANS friendly |
| Sparco Evo QRT | Side mount | FIA 8855-1999 | Not listed | Not listed | Not listed |
| Cobra Suzuka T Pro-Fit | Side mount | FIA 8855-1999 | All heights | 28" to 32" | HANS friendly |
| Cobra Suzuka T RT Track | Side mount | Road and track | Under 6ft | 28" to 32" | Not listed |
| Corbeau Sprint X System 5 Vinyl XL | Side mount | FIA 8855-1999 | Not listed | Not listed | Not listed |
| Reclining sport seats | |||||
| Auto Style Type BS5 | Base mount, 345mm x 280mm | Road and track | Under 6ft | All sizes | Not listed |
| Sparco R100 Martini Racing | Base mount, 345mm x 271mm | Road and track | All heights | 32" to 36" | Not listed |
| Auto Style Type RS6-II Fabric | Base mount | Road and track | Not listed | Not listed | Not listed |
| Sparco R100 | Base mount, 345mm x 271mm | Road and track | Over and under 6ft | All sizes | Not listed |
Common questions
Which bracket does the Yaris Mk2 need?
Planted Technology confirm one at £222.60 per seat, for 2005 to 2011, base mount. It is priced per seat, so two front seats means two orders.
Is there a roll cage for the Mk2?
Not currently confirmed. The OMP cages sold under the Yaris name are titled MK1 and MK3, different generations, and we would rather say so than sell you the wrong part. Ask us and we will check what is available.
Does the Mk1 frame fit the Mk2?
No. A Sparco frame listed for the Yaris built May 1999 to 2006 is predominantly a Mk1 fit, and we have excluded it from this guide since it does not reliably cover the Mk2. The Planted bracket confirmed for 2005 to 2011 is the correct choice.
Which seat is the largest here?
The Corbeau Sprint X System 5 Vinyl XL at £978.00 is the biggest shell on this page.
Which harness should I buy?
For FIA competition, the Schroth Profi 3×2 at £370 and the TRS Magnum 6 Point Superlite at £294.00 both meet 8853-2016, and the TRS Magnum 4 Point at £139 meets 8854-1998. For road and trackday use, the Takata Drift II and III and the TRS Clubman belts cost less but are not HANS compatible.
Can I use the standard rear seat belt mounts for the harness?
No. They are not rated for the loads a harness shoulder strap puts through them in an impact. With no cage confirmed for this car, a bolt-in harness bar or a fabricated anchor point is the usual route.
More help
If you want the bracket confirmed against your specific car, or want us to check whether a cage is planned for the Mk2, the contact link is the quickest way to get it looked at.
Need a personal recommendation?
We're here to ensure you pick the right seat.
Contact us today.