Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Ford Focus 2008-2011 US Model Bucket Seat Guide

Choose the SB114 fitting route for your US-market Focus

For a US-market Ford Focus in the 2008 to 2011 application range, the Planted SB114 is the lower seat bracket we list. This guide follows Planted’s stated US left-hand-drive model baseline. Each bracket covers one front position. The seat, runner and any side brackets need matching above that vehicle-specific base.

Garreth would start with the driving position you want and how the car is used. Cameron can then compare the physical seating side, supplier reference and proposed mounting parts. Include the build and market with your enquiry, particularly where a car has been imported or its original seats have already been changed.

At a glance

  • Vehicle scope: the US left-hand-drive baseline for Planted’s Focus 2008-2011 application; confirm the exact car and floor fittings.
  • One handed SB114 bracket covers one front seating position. Two seats need two correctly handed brackets.
  • Physical left: SB114DR, sold through the shop’s RHD Passenger Side option. This is the driver’s side in a US left-hand-drive car.
  • Physical right: SB114PA, sold through RHD Driver Side. This is the passenger’s side in a US left-hand-drive car.
  • The maker offers Standard and Alternate slider patterns; the current shop form selects seating side, so confirm the supplied pattern separately.
  • Base-mounted seats and side-mounted shells use different upper arrangements. Runners, restraint fittings and clearances need assessing with the chosen seat.

Identify the car before choosing the seat

Send the model year, market and steering arrangement with the seat enquiry. A photograph of each original lower mounting and the existing seat label is useful where the history is unclear. Include any brackets, spacers or runners left from a previous installation.

Planted lists SB114 against Focus 2008-2011 and explains that its brackets use US left-hand-drive vehicles unless stated otherwise. International applications need checking against the actual car. We use that manufacturer baseline here; the European Focus Mk2 and ST225 fitting guides remain separate.

For an import or an existing conversion, have the actual vehicle and supplied reference checked together before ordering.

Start with the handed Planted SB114 lower bracket

The SB114 connects the vehicle floor to the upper seating assembly. It is a fixed lower bracket. A separate runner provides sliding adjustment where it is required. Plan the complete assembly from the floor upwards before buying the seat.

Choose the physical side using the supplier code and the current shop option together. The shop lists SB114DR as RHD Passenger Side and SB114PA as RHD Driver Side. Planted names those same physical sides Driver / Left and Passenger / Right for its left-hand-drive baseline.

In a US left-hand-drive car, that makes SB114DR the left driver position and SB114PA the right passenger position. Ask for the quotation to state both the physical side and the actual supplied code. Have the Standard or Alternate upper pattern identified at the same time.

One bracket is one seating position. A two-seat installation needs a left bracket and a right bracket, with the upper parts specified for each seat. Include the appropriate fasteners and any required original equipment interfaces in the assessment.

Keep physical seating side and slider pattern separate

Use physical left and right beside each supplier code on the parts list, because a driver label changes meaning between left- and right-hand-drive cars.

Planted’s Standard pattern includes its RECARO slider connection. Alternate replaces that connection with the Cobra/Scheel-Mann arrangement. The maker distinguishes narrow Cobra sliders, which work with both patterns, from wide Cobra sliders that need the appropriate Alternate connection.

The current SB114 shop form exposes the seating-side choice without a separate Standard/Alternate selector. Confirm the actual supplied version before ordering a runner. Selecting a Cobra seat or a named runner does not itself change the lower bracket supplied.

Physical position in a US LHD carPlanted referenceCurrent shop side labelUpper pattern check
Left, driverSB114DRRHD Passenger SideConfirm actual Standard or Alternate version
Right, passengerSB114PARHD Driver SideConfirm actual Standard or Alternate version

Choose the runner with both interfaces in view

The adjustable arrangement runs from the vehicle bracket through the runner to the seat base, or through the runner and side brackets to a side-mounted shell.

Sparco 0049306 is a runner-kit reference to discuss for a matching upper assembly. Our listing uses the 345 mm by 271 mm base pattern. One kit serves one seat. Check its lower fixing points against the actual SB114 version as well as its upper connection.

Cobra Premium runners have 291 mm and 405 mm handle-width options in the shop. Treat those labels as selection information, with the complete fixing drawing still required. Planted’s narrow and wide slider guidance and the seat’s own mounting dimensions must agree with the actual parts.

The Endurance runner is another option for an assessed assembly. Its universal description does not establish either connection to your chosen seat or SB114 bracket. Have the full hole spacing, travel, locking arrangement and fixings checked before adding it to the order.

Garreth would have one complete runner set itemised per adjustable seat. That makes a pair quotation easier to follow and avoids buying two different kits for the same position. See our sliding-runner guide for the wider options.

Match side supports to the shell and lower assembly

A side-mounted shell needs two side brackets, one along each side of the seat. Sparco SS004902 is sold as that pair. One set supports one seat. Check the seat’s permitted side fixing arrangement and the connection beneath the brackets together.

The bracket slots and hole positions set the proposed height and angle before final assembly. They do not establish that every shell clears the door or centre console. Include the seat width, shoulder area and operating space for the belt buckle in the check.

Planted explains that its own side supports normally use sliders between the supports and vehicle bracket. A fixed installation needs its own assessed fixing arrangement. Have the installer follow the instructions for the actual combination without assuming a runner can simply be removed from an existing assembly.

Compare three fixed-seat mounting approaches

The Cobra Monaco Pro supports base and side mounting. Its listed base pattern is 292 mm by 330 mm. Choose the intended mounting route and matching runner or side supports before comparing the resulting driving position.

The side-mounted Corbeau Sprint X System 1 and OMP Champ-R are choices for an assembly with separately specified side supports and lower fittings.

Seat homologation belongs to the particular seat and label, with the permitted mounting and event requirements assessed separately. It does not certify a complete SB114 installation or guarantee occupant fit. Cameron would check the proposed seat and supports inside the actual cabin before committing to the final position.

A showroom comparison can help narrow the seat choice by support and ease of entry. Include your measurements and intended use with the enquiry. Allow for the helmet and the required restraint routing where these form part of the build.

Plan a recliner around the base and its controls

The Sparco R100 is a base-mounted recliner with a listed 345 mm by 271 mm pattern. It is sold as the seat, so the lower bracket and any required runner remain separate parts. Include room for the reclining control and the original belt buckle in the proposed position.

The Cobra Daytona listing requires a seat-base choice as well as the selected trim and side configuration. Have the appropriate base specified for this installation. Choosing a special base from the options does not establish a Focus application or remove the need to match the lower connections.

The Corbeau RRS listing below supplies two reclining seats. This is the standard-base pair. Vehicle frames are separate. Its listed base-pattern options need checking against the actual selected seat and upper assembly for both positions.

Garreth would compare these for everyday support, getting into the car and the adjustment you use most. Cameron can then check the control clearances and assembled height. A low-profile part name or a wider seat label is insufficient to predict the finished seating position.

Assess the TRS Clubman bolt-in option with the seating plan

TRS 21A300 is the Clubman three-point bolt-in listing shown here. Its bolted end fittings need suitable anchorage and routing for the actual car. The number in the product name does not identify ready-made attachment points in a Focus.

Specify the harness with the seat, occupant and intended use. Have the supplier instructions and complete restraint arrangement assessed before choosing it. This Clubman listing is separate from an FIA competition-harness recommendation and does not provide a HANS system.

Keep the original seatbelt and buckle arrangements in the discussion where the car is also used on the road. The installation needs to maintain the required functions of the particular vehicle. A seat with harness openings does not determine which restraint is suitable.

Check the Clubman four-point clip-in fittings separately

TRS 21B400 is the four-point clip-in Clubman listing. Its snap-hook ends require the correct compatible anchorage hardware. Confirm the complete installation with the actual seat and car before deciding whether that arrangement suits the build.

Four-point does not mean that a crotch strap is supplied or that there is an approved location for one in the car. Do not infer anchorage, belt angles or event approval from the strap count. The actual harness instructions and use requirements govern the choice.

For competition use, ask for the appropriate seat, restraint and mounting recommendation together, with the intended event identified.

Put the complete fitting parts on one quotation

Start the list with the physical side and the actual SB114 version. Add the runner where adjustment is required, followed by the appropriate base connection or side supports. List the fixing hardware and restraint interfaces separately so the complete proposal can be checked.

For two seats, count every position independently. The RRS pair supplies two seats. One SB114 bracket and one runner kit each cover one position. A pair of side brackets supports one side-mounted seat.

Have any original seat-mounted electrical functions identified with the vehicle details before the seat is removed. The bracket alone does not establish how those functions are retained. Include the intended use and any required installation documentation with the parts assessment.

Assembly partWhat to specifyCheck before ordering
Vehicle bracketOne SB114DR left or SB114PA right per positionExact vehicle application and supplied slider pattern
AdjustmentOne matched runner kit per adjustable seatBoth fixing interfaces and usable travel
Seat connectionBase mounting or a pair of side supportsSeat instructions, fixing spacing, height and angle
Seat pairTwo independently specified fitting assembliesLeft/right controls, buckle clearance and quantities
Restraints and fixingsSuitable hardware and assessed belt arrangementComplete installation and intended use

Check the driving position before final assembly

Set the proposed seat position with the steering wheel and pedals in view. Check head clearance, legroom, door closure and access to the seat controls. The full runner travel needs to work without contact with trim, wiring or the belt fittings.

Include the actual occupant in that assessment. A seat’s nominal dimensions or a listed waist range cannot establish the driving position inside the Focus. Check both front positions where two seats are being fitted.

Use the supplied installation instructions and have the complete assembly fitted and checked by someone competent in this work. Have the exact fixing requirements and any vehicle-specific functions resolved before use. For parts advice, drop us an email or open a chat with the car and proposed seat details.

Common questions

Which Focus does this guide start from?

Planted's Focus 2008-2011 application and its stated US left-hand-drive model baseline. Confirm the exact build and floor before ordering. European Mk2 and ST225 guides are linked separately.

Does the SB114-ST225 shop suffix establish European fitment?

A shop suffix and a matching year range do not establish the vehicle floor. Have the actual car and supplied reference confirmed with the supplier before ordering for an international application.

Which bracket is physical left?

SB114DR is Planted's physical-left reference. The shop lists it under RHD Passenger Side. It is the driver position in the US left-hand-drive baseline.

Which bracket is physical right?

SB114PA is the physical-right reference. The shop lists it under RHD Driver Side. It is the passenger position in the US left-hand-drive baseline.

Does one bracket fit both front seats?

One bracket covers one position. A two-seat installation needs the correct left and right brackets, with the upper parts specified for each.

Does the bracket slide?

The SB114 is the fixed lower bracket. A separate matched runner provides fore-and-aft adjustment where it is required.

What is the Standard pattern?

Planted identifies Standard as the version with its RECARO slider connection. Confirm the actual bracket supplied through the shop and match the runner drawing to it.

What is the Alternate pattern?

The maker replaces the RECARO slider connection with its Cobra/Scheel-Mann arrangement. The shop's seating-side selection does not itself select this version.

Which Cobra runner width should I choose?

The shop lists 291 mm and 405 mm handle-width options. Match the full drawing and the maker's narrow or wide slider guidance to the selected seat and actual bracket version.

Can I use a universal runner without checking the pattern?

Check both interfaces. A universal description does not establish the fixing points to the seat and the lower bracket.

Where do runners sit with a side-mounted shell?

The usual adjustable arrangement places the runner above the vehicle bracket and below the side supports. Follow the instructions for the actual assembly.

Can a Monaco Pro be base mounted?

The listing allows base and side mounting, with a 292 mm by 330 mm base pattern. Specify the chosen route and matching upper parts before ordering.

Do the Sprint X and Champ-R need side supports?

Both listings identify side mounting. Have supports, runners where required and the lower connection checked for the actual shell.

Are the RRS pair's vehicle frames included?

The RRS-X2 listing supplies two seats only. Specify two handed vehicle brackets and the remaining fitting parts separately.

Does choosing a Daytona trim also choose its base?

The listing has a required seat-base choice. Have the correct base, side and trim configuration itemised for the installation.

Does a four-point harness include a crotch strap?

Do not infer that from a four-point name. Use the actual harness specification and instructions to establish its supplied straps and required anchorage.

Are the Clubman examples an FIA competition recommendation?

They are separate road-and-track Clubman listings. Have the restraint specification checked against the intended event and complete seat installation.

Can I use a European Focus cage in this car?

Have any cage matched to the actual US-market body and intended use. A shared Focus name or a European Mk2 application does not establish that fitment.

Will an aftermarket seat preserve the original electrical functions?

The seat and bracket do not establish that by themselves. Include the original equipment details with the installation assessment so the required functions are identified before work starts.

What should I send with the fitting enquiry?

Include the build, market, steering arrangement, physical side, exact seat and intended use. Photographs of the original floor and seat fittings help where an import or previous conversion makes the arrangement unclear.

Garreth's top tip

I would have the seat and one complete fitting assembly priced together. For two seats, make the left and right quantities explicit on the quotation. That is especially useful when the seat order is a pair but the brackets and runners are sold individually.

For a reclining road seat, I would compare the R100 with the Daytona before choosing a trim. Try the support and access, with the seat controls in mind. For fixed buckets, the Monaco Pro’s choice of base or side mounting gives us another fitting route to assess. We can help narrow the seat choice before Cameron works through the upper parts.

Cameron's fitting view

I would put the physical side and full supplier code beside the car details, then match the connections above the bracket. The shop’s RHD labels need translating for a US left-hand-drive car. Check the supplied pattern before choosing the runner.

The final position needs checking with the actual seat and occupant. Allow for the controls, belt buckle, full sliding travel and the required vehicle functions. Have those details resolved with the fitting instructions before the installation is finished.

Plan your Ford Focus 2008-2011 US model seat change

Drop us an email or open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.

Back to the Car Seat Selector guide.

Application references: Planted application guide, Planted fitting FAQs and installation instructions. Match the actual supplied parts and their current instructions to the car.

Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text