Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Cobra heated seats and lumbar support: how the pack works and which recliners take it

Is the lumbar support on the Cobra Le Mans manual or electric, and can I order it on its own? A fleet customer asked us exactly that this month. The lumbar is manual: an air pocket in the backrest that you pump up with a hand bulb. On every Cobra recliner it comes as one pack with a fitted seat heater, which Cobra builds into the seat when it is made.

  • Every price checked against our live Cobra listings on 16 November 2026, inc VAT
  • The pack is chosen seat by seat, so driver and passenger can differ
  • Cameron plans the heater wiring and switch with you before the seats are made
Heater wiring plugs and the black lumbar hand pump coming out beside the recline knob of a Cobra Misano Anniversary seat
A Misano Anniversary built with the pack: two heater leads and the lumbar pump leave the seat by the recline knob.
The short answer

Cobra Le Mans Reclining Sport Seat

£619inc VAT, one seat without the pack

Pick Fitted Seat Heater and Lumbar Support under Optional Extras and the seat is £249.00 more. Cobra builds both into the seat when it is made.

  • Lumbar is manual: a hand bulb inflates an air pocket in the backrest
  • On the Le Mans it comes only with the fitted seat heater
  • Chosen when you order, never added to a finished seat
  • The heater runs from 12V with its own relay and switch
ManualLumbar pump, no motor
£249.00Heater and lumbar pack, per Le Mans seat
4 familiesLe Mans, Daytona, Misano and Stuttgart
12VThe only wiring is for the heater

Manual or electric? How the heater and lumbar pack works

The pack puts two things inside the seat. The lumbar support is an air pocket in the backrest padding, at the small of your back, and it is entirely manual: squeeze the hand bulb and the backrest pushes forward into your lower back, open the valve on the bulb and the air comes back out. There is no motor and no wiring on the lumbar side.

The heater is the electric half, sitting in the seat and running from a 12V feed in the car through its own relay and switch.

1

Air pocket in the backrest

Built into the padding at the height of your lower back, and hidden by the trim.

2

Hand bulb on a hose

The bulb comes out at the side of the cushion, so you can firm it up for a long run and let it down for a short one.

3

Heater built into the seat

Fitted by Cobra while the seat is being made, with leads that come out at the base.

4

Relay, switch and template

The kit takes a 12V supply and a home for the switch, drilled from the template wherever suits you.

A Misano Anniversary built with the heater and lumbar pack, photographed in our showroom

Every Cobra recliner can be built with the pack

The heater and lumbar pack is a Cobra build option. Garreth confirms that every reclining seat Cobra makes can have it. On the Le Mans, Le Mans Heritage, Le Mans with armrests, Daytona, Misano Anniversary and Misano Lux listings it is a choice under Optional Extras, at £249.00 a seat (£248.40 on the Heritage).

The editions, Land Rover seats and car packages are built on the same seats, so where a listing has no Optional Extras choice, tell us you want the pack before you order and we add it to the build with Cobra.

FamilyWidth x heightSeat from, inc VATPack on the listing
Le Mans540 x 820mm£619.00£249.00
Daytona580 x 865mm£599.00£249.00
Misano Anniversary590 x 885mm£1,649.00£249.00
Stuttgart520 x 800mm£619.00Ask when ordering

Sizes are as each family's listing gives them. The Daytona is 40mm wider than the Le Mans, and the Stuttgart is the narrowest.

Le Mans recliners

The Le Mans is the seat our fleet customer asked about. It is 540mm wide and 820mm tall, sized for a 32 to 36 inch or 36 to 38 inch waist, with the pack at £249.00 a seat, so the vinyl and spacer fabric version at £619.00 becomes £868.00.

Because the pack is chosen seat by seat, a driver who covers the miles can have heat and lumbar while the passenger seat stays plain, which keeps the cost where it does most good on a fleet order.

The Heritage version lists the pack at £248.40, and the Le Mans with armrests is the touring version, with armrests fitted and heating listed as an option.

The Tartan Edition and the Special Edition, which takes trims Cobra does not run as standard such as Harris Tweed houndstooth, are made to order in 4 to 6 weeks, like the Heritage. Their listings carry no Optional Extras choice, so ask for the pack when you order. The same goes for the Le Mans Carbon Edition.

Daytona recliners

The Daytona is the wider seat, 580mm across on a 530mm base and 865mm tall, for drivers who find the Le Mans snug around the hips. The standard Daytona lists the pack at £249.00 a seat. The Tartan Edition, with a choice of tartan centres, and the Houndstooth version are built on the same seat; ask for the pack with either.

Misano recliners

The Misano Anniversary is the largest and most heavily trimmed of the family, a steel-frame seat 590mm wide and 885mm tall, made to order in 4 to 6 weeks. It is the seat in our photographs. The standard Misano Anniversary and the Misano Lux both list the pack at £249.00 a seat.

We also list the Spec 2 version and a pair named for the pack, where you set the pack on each seat separately and both seats are trimmed from the same batch.

Stuttgart recliners

The Stuttgart is the slimmest Cobra recliner, 520mm wide and 800mm tall with a headrest, and we list it for vans such as the Vauxhall Vivaro. It comes in vinyl, leather, a Signature version made in your own colours, and a Vinyl Tartan Edition. None of the Stuttgart listings has the pack as a choice yet, so ask for it when you order and Cameron confirms the price with the build.

Land Rover seats and car packages

Our Land Rover seats are the Le Mans, Heritage, Daytona and Misano Anniversary supplied for a Defender, a 90 or a Series 3. They are the same Cobra recliners, so the pack can be built into any of them, and a heated seat with lumbar makes a lot of sense in a Defender. The same applies to our Misano Anniversary car packages, such as the Nissan GTR, Audi R8 and VW Golf Mk6 versions.

Ordering seats with the pack, step by step

1

Choose the seat and trim

Pick the family that suits your size and car. Cameron can check the fit with your height and waist.

2

Choose the pack per seat

Select Fitted Seat Heater and Lumbar Support on each seat that needs it, or tell us if the listing has no choice.

3

Cobra builds the seats

The pack goes in during manufacture, and made to order seats are listed at 4 to 6 weeks.

4

Wire the heater, place the bulb

Your fitter runs a 12V feed through the relay and fits the switch, while the lumbar bulb needs no wiring.

It cannot be added laterCobra builds the heater and the air pocket in while the seat is made, so a finished seat cannot have the pack added. Decide on every seat before the order goes in. If you are unsure, drop us an email or click to open a chat and Cameron will go through it with you.

Fitting and wiring the heater

The heater comes with everything needed on the car side: its own wiring, a relay, a switch and a drilling template for the switch. Installation is a 12V supply and a place for the switch, and it is wired separately from the car’s original seat wiring. On the seat in our photographs, two leads with white multi-pin plugs come out beside the recline knob, ready to connect.

The lumbar hose and bulb come out at the side of the cushion. Leave the bulb where your hand drops naturally, tucked down between the seat and the tunnel or the door, because it needs no fixing and it is the part of the pack you will use on every drive.

Heat without the lumbarThe heater is also listed on its own as the Cobra Seat Heater Kit, Factory Fitted (ACCES55), made to order in 4 to 6 weeks. It is for a new Cobra seat: add it to the basket with the seat and Cobra fits it before the seat ships. Like the pack, it cannot go into a seat that has already been made.

Nogaro bucket seats: lumbar and heater chosen separately

Cobra’s fixed-back Nogaro bucket seats split the two. You can choose Inflatable Lumbar Support on its own, Heated Seats on their own, or Fitted Seat Heater and Lumbar Support for both, so a track day car that never sees winter can have lumbar without the heater.

SeatSeat fromLumbar onlyHeater onlyBoth
Cobra Nogaro Circuit£819.00£109.00£179.00£288.00
Cobra Nogaro Club Sport£629.00£109.00£179.00£288.00
Cobra Nogaro Street£789.00£107.40 to £109.00 by trim£178.80£286.80
Cobra Nogaro Speedster£849.00£84.00£179.00£264.00

The Nogaro editions and car packages (Munich, M Style, Ebisu, GR Yaris, BMW E92 M3 and the carbon shells) list the same three choices.

A Cobra bucket seat you already own: Real Race lumbar pads

If your Nogaro or another fixed-back bucket seat was built without lumbar, a Real Race pad does a similar job from behind the backrest cushion. It is a flat inflatable bladder with a hand bulb on a hose, pumped by hand like Cobra’s own.

On most shells the cushion is held on with velcro: peel it off, lay the pad on the shell, press the cushion back and run the hose out at the side, away from the harness slots. The single cell pad gives one low curve, while the 3 cell pad, the taller of the two, supports the whole lower back. Both typically take 3 to 5 working days.

Check the trim firstThe pads need a velcro-held cushion. Bonded or stapled trim leaves no pocket, so send Cameron a photo of the backrest with the cushion lifted. Our guide to adding lumbar support to a Cobra Nogaro goes through it seat by seat.

Questions customers ask about Cobra heating and lumbar

Manual. An air pocket in the backrest is pumped up with a hand bulb and let down with its valve. Only the heater in the same pack needs power.
No. On the Le Mans and Cobra’s other recliners the lumbar comes only in the Fitted Seat Heater and Lumbar Support pack, £249.00 per seat on the Le Mans. On a Nogaro bucket seat you can have lumbar on its own.
Yes: order the Cobra Seat Heater Kit, Factory Fitted (ACCES55) with the new seat and Cobra fits the heater before it ships.
Yes. It is a Cobra build option across the Le Mans, Daytona, Misano and Stuttgart families, including the editions and Land Rover versions. Where the listing has no Optional Extras choice, ask for it when you order.
No. The heater and air pocket are built in while the seat is made. For a fixed-back bucket seat such as a Nogaro, a Real Race single cell or 3 cell pad can go behind a velcro-held cushion.
No, it is chosen per seat, so the driver’s seat can have heat and lumbar while the passenger seat is ordered without.
It comes with wiring, a relay, a switch and a drilling template, and runs from a 12V feed, wired on its own and not into the car’s original seat wiring.
The pack is built in with the seat, so it follows the seat’s own lead time. The Misano, Heritage and edition seats are listed as made to order, 4 to 6 weeks.

What we tell fleet and road car buyers

G

Garreth

Garreth's top tip

If someone spends all day in the car, put the pack on the driver's seat when you order, because it cannot go in later.

Choose the family by the driver's size first, then the trim, then the pack. A Daytona with heat and lumbar for a broad driver beats a snug Le Mans with every option.

C

Cameron

Cameron's fitting view

The lumbar is the easy half to fit, because there is nothing to wire. I plan the heater switch position and its 12V feed before the seats go in, so the leads run tidily under the trim.

On a fleet order I list every seat with its trim and whether it has the pack, so the build sheet Cobra works from is exactly what each driver gets.

Ordering Cobra seats with heat and lumbar?

Ring us with the seats you want and which of them need the pack. Cally, our digital receptionist, takes your details and Cameron comes back to you with the order set out seat by seat.

Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text