The Cobra Nogaro Street, a fixed back bucket seat in a one piece fibreglass shell. Part number NOGS-GC.
Read this first: there are no harness slots
The Street is made for a standard three point seat belt. There are no slots cut in the shoulders, so a 4 or 6 point harness cannot be routed through it.
That is the only functional difference from the Nogaro Circuit, and it is not a small one. If there is any chance of running a harness, order the Circuit instead, because the slots cannot be added later.
Where the Street makes sense is a road car keeping its factory belts, which is most of them. You get the shell, the support and the look without paying for slots you will never thread anything through.
The shell
The same one piece fibreglass as the Circuit: 910mm tall, 560mm wide, 490mm across the base, 710mm deep, at 7.9kg. Side mount only.
Cut for drivers over 6ft with a 32 to 36 inch waist, the long backrest being the reason it suits taller people.
Trim
Amalfi leather with Dinamica suede, or Tartan, in one or two colour combinations. Heated seat and inflatable lumbar available at checkout.
Road and Track approved rather than FIA homologated.
Seat only. Tell us the car for side mounts and a subframe.







