Toyota Celica 1978 to 1981 Bucket Seat and Fitting Guide
Choose the 1978 to 1981 application using the car’s own identity
Which fittings do you need for a Celica in Planted’s 1978 to 1981 application? Our listed route is SB171. Start with the actual chassis, body and floor, then choose the seat and adjustment that suit the driver.
Garreth would try the cushion and bolster access before choosing a finish. Cameron would compare the current mounting arrangement with the car’s original locations. Send details of earlier floor or seat changes with the enquiry.
At a glance
- SB171 names the manufacturer’s Toyota Celica 1978 to 1981 application.
- SB171DR identifies physical left and SB171PA physical right; confirm the supplied shop variation and actual steering side.
- Use chassis, body and build details to identify the application, including when the engine or seats have changed.
- A coupe, liftback or Celica Supra description needs its own exact application check.
- Specify the floor bracket, runner or fixed connection and supports as a complete assembly for each physical position.
- The named 345mm by 271mm Sparco diagram is a seat-side reference, separate from the Celica floor.
Identify the body, build and original floor before selecting parts
The maker’s application records name Toyota Celica 1978 to 1981 for SB171. Give the chassis identification and actual body with the enquiry. Include the build and steering side alongside that information.
If the engine or seats have changed, the original vehicle identity and mounting locations still belong in the fitting check.
Photograph the present seat connections and show any adapters or floor alterations. Include previous parts references where known. Cameron would compare the floor that is present now with the proposed bracket before selecting the upper fittings.
Keep body and Supra enquiries tied to exact manufacturer applications
Tell us whether the actual body is a coupe or liftback when asking about SB171. A shape description is useful information for the enquiry. It does not replace checking the original floor and supplied bracket.
For a Celica Supra enquiry, send the exact chassis and build details for its own application check.
The earlier 1970 to 1977 Celica is named separately under SB197. Later ST185, T200 and T230 cars also have their own guides. Keep that generation boundary with the seat and fitting references.
Later-generation guides: Celica ST185 · Celica T200 · Celica T230.
Match the SB171 physical side with the supplied variation
The SB171 listing provides the floor-bracket route for Planted’s named 1978 to 1981 Celica application. The maker identifies SB171DR for physical left and SB171PA for physical right. Specify the actual physical position being changed.
The shop’s RHD seating-side wording needs matching to the full supplied code and actual steering side.
Keep every selected connection on the parts list. Include a runner or fixed arrangement, supports where needed and retained buckle hardware. When fitting both front seats, confirm each physical side and the required quantities separately.
| Physical position | Manufacturer reference | Cobra alternate reference |
|---|---|---|
| Left | SB171DR | COBRA-SB171DR |
| Right | SB171PA | COBRA-SB171PA |
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Select the runner pattern with the exact seat references
Planted’s general FAQ distinguishes Standard and Alternate slider patterns. Wide Cobra and Scheel-Mann runners require its Alternate pattern. The narrow Cobra runner fixings are included on both versions.
The SB171 records include Cobra-prefixed alternate codes for both physical sides.
Send the full seat and runner references before choosing the supplied bracket version. Compare the upper seat connection and the lower bracket connection independently. Cameron would confirm that complete arrangement before the order is finalised.
Compare fixed-back seats by support and mounting route
The Cobra Monaco Pro is a fixed-back steel-frame candidate with listed base and side mounting choices. Try the cushion and support with the driver. Confirm the actual version and selected lower arrangement together.
The standard Sparco Sprint card uses the BRR0003 family reference; its maker catalogue shows base and side fixing routes.
The OMP TRS-E Velour is another steel-frame choice with both routes listed. Compare bolster access and the position you want in the Celica before choosing the finish. Garreth would put the driver’s support and entry first in that comparison.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £252.00 Incl. VATFrom £210.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £244.40 Incl. VATFrom £203.67 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Try reclining choices with their controls and lower fittings
The Sparco R100 is a base-mounted reclining option to try. The shop record linked here uses legacy 00961NR, while the newer catalogue names the 009014 family. Confirm the actual supplied version before choosing fittings from its drawing.
The Corbeau Sportline RRS card is a pair of seats on the listed standard base. Each physical position needs its own Celica bracket and upper assembly. Confirm the package contents and quantities for the complete order.
The Cobra Misano Anniversary has its own reclining mechanism, shell and trim choices. Trial the controls and backrest movement beside the actual door and tunnel. Include any access needed behind the front seats in that trial.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,649.00 Incl. VATFrom £1,374.17 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Match the Cobra runner to both connections
The Cobra Premium runner listing offers 291mm and 405mm handle-width options. Match the actual runner to the seat and supplied SB171 slider pattern. The handle label alone cannot identify the complete fixing layout.
Send the full Monaco or Misano reference with the runner enquiry.
Check the upper seat connection and lower bracket connection as separate interfaces. Trial the required movement and release-handle access in the Celica. Include the runner’s thickness when comparing the complete driving position.
-
From £84.00 Incl. VATFrom £70.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Specify the Sparco slider with the actual seat version
The Sparco 0049306 runner is a sliding option to discuss with the named Sparco seats. Its catalogue shows a 271mm longitudinal fixing distance. Confirm the entire upper and lower layout with the supplied seat, supports where used and SB171 bracket version.
The named Sprint and R100-family seat-side base fastenings below are 345mm by 271mm.
Trial both rails through the travel required by the driver and check that they release and lock together. Include the handle and surrounding trim throughout that movement. A shared dimension at one connection leaves the other interfaces to verify.
Use supports specified for the chosen side-mounted shell
For a side-mounted shell, supports join the seat’s side fixings to the lower assembly. The Sparco steel supports shown here are a candidate for the exact Sparco shell and its instructions. Use another seat family’s own confirmed support combination.
The shell’s side fixings and the support’s lower pattern each need their own reference.
Cameron would check the exact shell, support orientation and specified fasteners before comparing the lower connection. Include any runner and the supplied SB171 version in that drawing comparison. The vehicle application alone cannot specify those upper components.
Plan fixed positioning as its own complete arrangement
Planted publishes separate installation arrangements for base-mounted and side-mounted seats, with and without sliders. Its FAQ describes its own side mounts with sliders beneath them. Ask us to specify the complete fixed arrangement if adjustment is not required.
Removing a runner changes the connection and finished position.
Trial the selected components in the actual car using the relevant instructions. Check pedal and steering reach with the driver. Garreth would also try getting over the bolster and the access needed behind the seat.
See the named Sparco seat-side centres at one scale
The named Sprint and R100-family lower fastenings in the Sparco catalogue measure 345mm across and 271mm front to rear. Both dimensions use the same scale in the drawing. Confirm the exact supplied seat version before choosing components around those centres.
The Celica floor, full SB171 slot layout and outside shell dimensions need separate measurements.
Trial the preferred seat and complete lower assembly in the cabin. Include shoulder room and access to the controls beside the actual trim. A Cobra, Corbeau or OMP choice needs that exact version’s drawing for its own seat connection.
Source: Sparco 2025 manufacturer catalogue, printed pages 178 and 326 to 327. The shop’s R100 reference needs supplied-version matching.
Choose the restraint with the shell and actual anchors
Include the intended belt arrangement before the lower fittings are finalised. Match the exact shell and restraint instructions to the actual anchors and driver. Photograph the existing buckle connection and retained hardware.
For a harness enquiry, show any proposed bar or cage and its specified attachments.
Check the shell openings, strap configuration and anchors as one arrangement. Trial routing and buckle access with the seat in its intended position. Choose a harness product once that configuration has been established.
- Original belt: check the exact shell, buckle position and retained mounting hardware.
- Harness: confirm the required straps, shell openings and available anchor arrangement together.
- Two seats: specify each physical side, quantities and the adjustment needed by each occupant.
Send the original vehicle identity and present mounting details together
Send the chassis identification, body, build and steering side with photographs of the original mounts. Show current adapters or floor alterations and the present buckle connection. Include the full seat and fitting references you want to consider.
Describe the adjustment, access, original functions and belt arrangement you want to retain.
Measure the current driving position if a height change is the aim. The cushion, shell angle and lower fittings all contribute to the result. Cameron would trial the complete proposed position with the driver before confirming reach and clearance.
Common questions
Which Celica application does SB171 name?
Planted names Toyota Celica 1978 to 1981. Confirm the actual chassis, body, build and original floor against that application. Include previous mounting changes before choosing the supplied bracket.
Does a coupe or liftback description settle the fit?
Include that body information with the actual chassis and build. Compare the original mounting locations and supplied bracket as well. The shape description alone does not establish the complete application.
Can I identify the bracket from the engine currently fitted?
Use the original vehicle identity and mounting locations for the fitting enquiry. Tell us about an engine or seat conversion where relevant. A current engine description does not establish the floor-bracket application.
What should I send for a Celica Supra enquiry?
Send the exact chassis, body and build details with photographs of the original floor mounts. Ask for the manufacturer application for that actual car. Do not infer it from a shared Celica name or the proposed seat.
Which code is physical left or right?
SB171DR identifies physical left and SB171PA physical right in the maker records. Cobra-prefixed alternate codes retain those positions. Confirm the actual steering side and full supplied shop variation reference.
How do Standard and Alternate runner patterns differ?
Planted’s general FAQ directs wide Cobra and Scheel-Mann runners to the Alternate pattern and includes narrow Cobra runner fixings on both. Send the complete seat and runner references. Confirm the supplied SB171 version and both fixing interfaces.
Does the RRS pair include two Celica brackets?
The linked card describes a pair of seats on the named standard base. Specify a vehicle bracket and selected upper assembly for each physical side separately. Confirm current contents and quantities before ordering.
Can I specify a fixed seat position?
Ask us to specify the full fixed arrangement for the exact seat and car. Planted publishes separate installation arrangements with and without sliders. Check the connections and final position for the chosen assembly.
What does the scaled 345mm by 271mm drawing show?
It shows named Sparco seat-side lower fastening centres in the maker catalogue. The actual Celica floor and full SB171 slot layout need separate references. Match the supplied seat version and each remaining interface.
What if the original mounts have been changed?
Photograph the original locations and current adapters or floor alterations. Include the previous component references where known. Check the named application against the floor and assembly the car actually has.
How much lower will the replacement seat sit?
Compare the current position with a trial of the complete proposed assembly and actual driver. The cushion, shell angle and lower components all contribute. The bracket code alone cannot predict a reduction.
What completes the seat and fitting enquiry?
Send the chassis identification, body, build, steering side and mounting photographs. Include the exact seat and fitting references, access and adjustment wanted, retained functions and belt arrangement. Show any previous adaptations.
Garreth’s top tip
Garreth would try the support, cushion and bolster access before choosing the finish. Include how the Celica is used and any access needed behind the front seats. Specify the complete lower arrangement around that exact seat.
Cameron’s fitting view
Cameron would keep the original vehicle identity and present floor photographs beside the SB171 reference. Confirm the physical side and supplied pattern before selecting the upper fittings. Trial the full position and access with the driver.
Plan your Toyota Celica 1978 to 1981 seat change
Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Sources: Planted application records, slider-pattern and market guidance and assembly-specific instructions; Sparco 2025 catalogue, printed pages 178 and 326 to 327; linked shop listings. Confirm the current supplied versions and actual car before completing the package.







