Volvo 240 Series 1974 to 1993 Bucket Seat and Fitting Guide
Start with the car, seat and complete lower assembly
Our 2023 Volvo 240 customer feature reports a pair of Sparco R100 Vinyl seats fitted with Planted brackets and sliding runners. That gives us a useful arrangement to discuss for your own car. Start with the exact body, build and seats fitted now.
Garreth would try the proposed seat with the driver before choosing the finish. Cameron would compare the current floor connections with the SB196 application and selected upper fittings. Include the adjustment and access you want after the change.
At a glance
- Planted names Volvo 240 Series 1974 to 1993 for SB196.
- The reported customer installation uses a base-mounted R100 Vinyl, runners and Planted brackets.
- Maker references identify SB196DR as physical left and SB196PA as physical right.
- Include the exact body, build, original market and steering side.
- Confirm the full seat, runner or fixed connection, supports and hardware for each position.
- The named 345mm by 271mm Sparco drawing shows seat-side centres; the Volvo floor needs its own measurements.
Use the reported installation with your own car details
The customer feature describes a black R100 Vinyl pair with sliding runners and Planted brackets. It reports room beside the seats in that particular car. Send the body, build and original market for your own 240 when asking us to specify an assembly.
Photograph the current seats, floor connections and any earlier adapters.
Include the complete references of parts you want to retain. Cameron would compare those details with the proposed lower fittings. Show any previous mounting changes and describe the adjustment needed by each driver.
Match the SB196 application to the actual 240
Keep the Volvo 240 Series 1974 to 1993 label with the complete SB196 reference. Include the exact body and original mounting arrangement when asking us to confirm the supplied bracket version. The individual customer installation is a starting point for that enquiry.
Give another Volvo model or a different year its own fitting enquiry.
The shop uses RHD seating-side variation labels. Planted describes brackets developed from LHD vehicles and asks for checks on other markets. Match the supplied code to the physical position and actual steering arrangement.
| Physical position | Manufacturer reference | Cobra alternate reference |
|---|---|---|
| Left | SB196DR | COBRA-SB196DR |
| Right | SB196PA | COBRA-SB196PA |
Choose the complete SB196 reference for each position
The linked card is the Planted bracket listed for Volvo 240 Series 1974 to 1993. Its maker references are SB196DR for physical left and SB196PA for physical right. Confirm the actual body and complete supplied code before selecting the shop variation.
Cobra-prefixed alternate references are listed for both physical positions.
Keep the chosen bracket with the exact seat and upper fittings on the parts list. Include the runner or fixed connection and any required supports. Confirm retained buckle hardware and quantities separately for each front seat.
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Select the runner pattern with the exact seat references
Planted provides Standard and Alternate slider patterns. Its FAQ directs wide Cobra and Scheel-Mann runners to the Alternate pattern. Narrow Cobra runner fixings are included on both versions.
The SB196 records include Cobra-prefixed references for both physical sides.
Send the full seat and runner references before choosing the pattern. Compare the upper seat connection and lower bracket connection independently. Cameron would keep the selected pattern beside the complete supplied code on the enquiry.
Compare fixed-back seats by support and mounting route
The Cobra Monaco Pro is a fixed-back steel-frame candidate with listed base and side mounting choices. Try the cushion and support with the driver. Confirm the actual version and selected lower arrangement together.
The standard Sparco Sprint card uses the BRR0003 family reference; its maker catalogue shows base and side fixing routes.
The OMP TRS-E Velour is another steel-frame choice with both routes listed. Compare bolster access and the position you want in the 240 before choosing the finish. Garreth would put the driver’s support and entry first in that comparison.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £252.00 Incl. VATFrom £210.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £244.40 Incl. VATFrom £203.67 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Try reclining choices with their controls and lower fittings
The customer feature reports the vinyl R100; the linked R100 card here is a separate listed version to specify by its full code and finish. The retained card uses 00961NR, while the newer catalogue names the 009014 family. Confirm the actual supplied seat before choosing fittings from its drawing.
The Corbeau Sportline RRS card is a pair of seats on the listed standard base. Each physical position needs its own 240 bracket and upper assembly. Confirm current package contents and quantities for the complete order.
The Cobra Misano Anniversary has its own reclining mechanism, shell and trim choices. Trial the controls and backrest movement beside the actual door and tunnel. Include any access needed behind the front seats in that trial.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,649.00 Incl. VATFrom £1,374.17 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Match the Cobra runner to both connections
The Cobra Premium runner listing offers 291mm and 405mm handle-width options. Match the actual runner to the seat and supplied bracket’s slider pattern. The handle label alone cannot identify the complete fixing layout.
Send the full Monaco or Misano reference with the runner enquiry.
Check the upper seat connection and lower bracket connection as separate interfaces. Trial the required movement and release-handle access in the 240. Include the runner’s thickness when comparing the complete driving position.
-
From £84.00 Incl. VATFrom £70.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Specify the Sparco slider with the actual seat version
The Sparco 0049306 runner is a sliding option to discuss with the named Sparco seats. Its catalogue shows a 271mm longitudinal fixing distance. Confirm the entire upper and lower layout with the supplied seat, supports where used and selected bracket version.
The named Sprint and R100-family seat-side base fastenings below are 345mm by 271mm.
Trial both rails through the travel required by the driver and check that they release and lock together. Include the handle and surrounding trim throughout that movement. A shared dimension at one connection leaves the other interfaces to verify.
Use supports specified for the chosen side-mounted shell
For a side-mounted shell, supports join the seat’s side fixings to the lower assembly. The Sparco steel supports shown here are a candidate for the exact Sparco shell and its instructions. Use another seat family’s own confirmed support combination.
The shell’s side fixings and the support’s lower pattern each need their own reference.
Cameron would check the exact shell, support orientation and specified fasteners before comparing the lower connection. Include any runner and the supplied SB196 version in that drawing comparison. The vehicle application alone cannot specify those upper components.
Plan fixed positioning as its own complete arrangement
Planted publishes separate installation arrangements for base-mounted and side-mounted seats, with and without sliders. Its FAQ describes its own side mounts with sliders beneath them. Ask us to specify the complete fixed arrangement if adjustment is not required.
Removing a runner changes the connection and finished position.
Trial the selected components in the actual car using the relevant instructions. Check pedal and steering reach with the driver. Garreth would also try getting over the bolster and the access needed behind the seat.
See the named Sparco seat-side centres at one scale
The named Sprint and R100-family lower fastenings in the Sparco catalogue measure 345mm across and 271mm front to rear. Both dimensions use the same scale in the drawing. Confirm the exact supplied seat version before choosing components around those centres.
The 240 floor, full selected bracket slot layout and outside shell dimensions need separate measurements.
Trial the preferred seat and complete lower assembly in the cabin. Include shoulder room and access to the controls beside the actual trim. A Cobra, Corbeau or OMP choice needs that exact version’s drawing for its own seat connection.
Source: Sparco 2025 manufacturer catalogue, printed pages 178 and 326 to 327. The shop’s R100 reference needs supplied-version matching.
Choose the restraint with the shell and actual anchors
Include the intended belt arrangement before the lower fittings are finalised. Match the exact shell and restraint instructions to the actual anchors and driver. Photograph the existing buckle connection and retained hardware.
For a harness enquiry, show any proposed bar or cage and its specified attachments.
Check the shell openings, strap configuration and anchors as one arrangement. Trial routing and buckle access with the seat in its intended position. Choose a harness product once that configuration has been established.
- Original belt: check the exact shell, buckle position and retained mounting hardware.
- Harness: confirm the required straps, shell openings and available anchor arrangement together.
- Two seats: specify each physical side, quantities and the adjustment needed by each occupant.
Send the car and proposed assembly details with the enquiry
Send the body, build, original market and steering side. Include photographs of the present seat mounts and any earlier adapters. Give complete references for the seat and lower components you want to retain.
Describe the adjustment and access wanted, together with the retained belt arrangement.
Trial the proposed seat and complete lower assembly with the driver before confirming reach and clearance. Include the actual trim and controls around the seat. Cameron would compare that position with the 240 floor connections.
Common questions
Which Volvo application does SB196 name?
Planted names Volvo 240 Series 1974 to 1993. Send the exact body, build, market and mounting photographs. Confirm the supplied package against the actual car and proposed seat.
What does the customer installation show?
The 2023 feature reports a pair of R100 Vinyl seats on sliding runners and Planted Volvo 240 brackets. Use it to discuss the complete assembly wanted for your own car. Include your exact body and original mounting details.
Does the reported R100 Vinyl settle my current seat version?
Send the complete current seat reference and finish. Compare its own drawing with the selected runner and bracket pattern. The customer feature reports the version fitted to that individual car.
How do I match the shop seating-side variation?
Give the actual steering side and physical seat position. Maker references identify SB196DR as physical left and SB196PA as physical right. Match the complete supplied code before selecting the variation.
Which alternate references are listed?
The maker records list COBRA-SB196DR for physical left and COBRA-SB196PA for physical right. Confirm the selected runner pattern and complete package. Match both fixing interfaces to the chosen seat.
How do Standard and Alternate runner patterns differ?
Planted’s general FAQ directs wide Cobra and Scheel-Mann runners to the Alternate pattern and includes narrow Cobra runner fixings on both. Send the full seat and runner references. Confirm the supplied version within the selected 240 bracket family and both fixing interfaces.
Does the RRS pair include two 240 brackets?
The linked card describes a pair of seats on the named standard base. Specify a vehicle bracket and selected upper assembly for each physical side separately. Confirm current contents and quantities before ordering.
Can I specify a fixed seat position?
Ask us to specify the full fixed arrangement for the exact seat and car. Planted publishes separate installation arrangements with and without sliders. Check the connections and final position for the chosen assembly.
What does the scaled 345mm by 271mm drawing show?
It shows named Sparco seat-side lower fastening centres in the maker catalogue. The actual 240 floor and full selected bracket layout need separate references. Match the supplied seat version and every remaining interface.
What if the original mounts have been changed?
Photograph the original locations and current adapters or floor alterations. Include the previous component references where known. Check the named application against the floor and assembly the car actually has.
How much lower will the replacement seat sit?
Compare the current position with a trial of the complete proposed assembly and actual driver. The cushion, shell angle and lower components all contribute. The bracket code alone cannot predict a reduction.
What completes the seat and fitting enquiry?
Send the chassis identification, body, build, steering side and mounting photographs. Include the exact seat and fitting references, access and adjustment wanted, retained functions and belt arrangement. Show any previous adaptations.
Garreth’s top tip
Garreth would try the seat for support, entry and backrest movement before choosing the finish. Include how you use the 240 and the access needed behind the front seats. Keep the chosen seat beside its complete lower assembly on the enquiry.
Cameron’s fitting view
Cameron would match the actual car details to the SB196 application first. Confirm the physical side and selected runner pattern against the supplied bracket version. Trial the complete position with the actual driver.
Plan your Volvo 240 Series 1974 to 1993 seat change
Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Sources: our 2023 Volvo 240 customer installation feature; Planted application records, slider-pattern and market guidance and assembly-specific instructions; Sparco 2025 catalogue, printed pages 178 and 326 to 327; linked shop listings. Confirm the current supplied versions and actual car before completing the package.







