SW Motorsports Mini Roll Cages Updated For 2024
Roll cage news, January 2024
With the 2024 season ahead, we have updated our whole range of SW Motorsports Mini roll cages. Every cage now has up to date information on its specification, its approval and the Mini it is built for, with more colour and configuration options to choose from.
The Mini range takes in both full and half cages for the R50, R52, R53, R56 and F56. In the showroom, a limited time discount on the SW Motorsports side mounts and M2 frames we hold is running at the same time.
- Our SW Motorsports Mini roll cages updated ready for 2024
- Full and half cages for the Mini R50, R52, R53, R56 and F56
- Half cages bolt in with no welding and include all fittings
- 45mm x 2.5mm CDS tube to E355+N, as the Motorsport UK regulations ask for
- A range of powder coat colours, with gusset options on some cages
- 15% off the SW side mounts and M2 frames we hold in the showroom, for a limited time

What is on this page
What has changed on the Mini cages
Every SW Motorsports Mini cage on our site has been checked and rewritten for the new season. Each listing sets out the specification of the cage, its approval and the shell it is built for, and the options have grown, with more powder coat colours and configurations to pick from.
SW Motorsports bolt-in cages suit track day drivers and fast road cars. SW build them from the same materials they use for their own race cars, and they add a good level of protection in the event of a roll.
Half cages for the Mini
The half cages reinforce the rear of the car and do not use door bars, so getting in and out stays easy. They are a full bolt-in fit with no welding, designed to go in at home with a basic set of tools, and they come with all the fittings and fixings needed.
The tube is 45mm x 2.5mm cold drawn (CDS) steel to the E355+N specification that the Motorsport UK Blue Book asks for. Colours run to black, blue, green, red, white, yellow, anthracite and orange, and gussets in the rear cross are offered on several cages.

-
From £577.00 Incl. VATFrom £480.83 Excl. VATPayPal CreditMade to orderKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £577.00 Incl. VATFrom £480.83 Excl. VATPayPal CreditMade to orderKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £682.00 Incl. VATFrom £568.33 Excl. VATPayPal CreditMade to orderKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £472.00 Incl. VATFrom £393.33 Excl. VATPayPal CreditMade to orderKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Full cages for competition
For a car that is going racing, SW also make full cages for the R50, R52, R53 and R56, built to the Motorsport UK tube dimensions. The listings explain how each one fits, including where the cage passes through the dash, so read them closely before ordering. Our guide to roll cage rules explains what is asked for, and the full SW Motorsports roll cage range covers other makes too, such as Ford and Honda.
Garreth’s advice is to check your harness mounting points against the cage design before you order, so everything lines up once it is in.
-
From £1,195.98 Incl. VATFrom £996.65 Excl. VATPayPal CreditMade to orderKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,344.00 Incl. VATFrom £1,120.00 Excl. VATPayPal CreditMade to orderKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,195.98 Incl. VATFrom £996.65 Excl. VATPayPal CreditMade to orderKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,344.00 Incl. VATFrom £1,120.00 Excl. VATPayPal CreditMade to orderKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
A showroom discount on seat mounts
In the showroom we hold M2 and SW Motorsports side mounts and all-in-one fitting kits, ready to dispatch or collect, including frames for the BMW E46 and the Renault Megane Mk2. Each frame is designed by M2 or SW Motorsports around the floor of one car, so no changes to the car are needed when it is used with a suitable seat.
For a limited time, every SW Motorsports side mount and M2 frame we hold in store has 15% off, applied automatically at the checkout. Our wider SW Motorsports seat mount range covers many more cars.
-
From £106.24 Incl. VATFrom £88.53 Excl. VATPayPal CreditSpeed+ ServiceSelect options This product has multiple variants. The options may be chosen on the product page
-
From £80.40 Incl. VATFrom £67.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £166.20 Incl. VATFrom £138.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £166.20 Incl. VATFrom £138.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Which Minis do the SW Motorsports cages fit?
Our updated range covers the R50, R52, R53, R56 and F56, each cage built for its own shell.
Do the SW Mini half cages need welding?
No. They are a full bolt-in fit with all fittings and fixings included.
What tube are the SW cages made from?
45mm x 2.5mm CDS steel to the E355+N specification set out in the Motorsport UK regulations.
Do the half cages have door bars?
No. They reinforce the rear of the car and do not use door bars.
💬
Ready for 2024SW cages for every modern Mini
Full and half cages for the R50, R52, R53, R56 and F56, in a range of colours.
Need a personal recommendation?
We're here to ensure you pick the right seat.
Contact us today.






