A PCI Racing adjustable seat mount for the Honda Prelude, 1997 to 2001. Part number SM-BB6-A1.
BB6 is the fifth generation Prelude, and it takes a different mount from the BB1 generation before it. Order on the chassis code rather than the model name, and send us the registration if you are not certain which you have.
The low option
PCI’s adjustable mount gives the largest range of adjustment and the lowest possible seat fitment in their range. No slider, so the seat is set at installation, though the hardware interlocks into the slots in the seat base and the position can be changed later with one tool without taking the mount out of the car.
For a single driver track car that is the right choice. For a shared road car, ask us about the sliding version.
Construction
Laser cut and CNC formed from one piece of 1/8 inch carbon steel, with the bends doing the work that thicker metal would otherwise do. Gloss black powder coat, grade 10.9 8mm hardware, five and six point sub belt mounting locations built in.
Ordering
Side mount, for a competition bucket, bolting to the factory seat mounting points so nothing is drilled and the original seats come out whole and can go back in.
Handed, order twice for a pair. Tell us the seat and we will confirm the combination before it ships.
Will this fit my car?
This frame is made for the Honda Prelude. Chassis code and years matter more than the badge, as floor pans change between generations, so if your car sits near a changeover year, send us the registration and we will confirm before you order.
Which seats does it take?
Check the bolt pattern in the specification against your seat. The Compatible seats tab above lists what bolts straight on. If your seat is not listed, tell us what you run and we will confirm the fit.
Do I keep fore-and-aft adjustment?
Only with a sliding runner between the frame and the seat, which is a separate part on PCI frames. If more than one person drives the car, budget for the runner. Our guide to sliding runners explains the options and widths.
Base mount or side mount, and does it matter?
This is a side-mount frame: the seat hangs between side brackets bolted through its flanks, the motorsport-style stack that gives fine height and angle control. Our guide on base mount versus side mount explains the whole fitting stack.
Is this for the driver or passenger side?
Both sides are available on this listing, pick driver or passenger side at the point of order (sides listed are for right-hand-drive cars). Left-hand-drive car? Ask us, as the sides swap over and availability varies by model.
