The Cobra Roadster 7 for the Marlin Sportster, a narrow fit bucket seat. Part number COBROAD7-MAR.
Getting in and out
In a low sided open car you get in over the side rather than through a door, and the shape of the seat decides how graceful that is. A tall shell with deep bolsters makes it awkward every single time.
The Roadster is cut low, which helps, and the bolstering is shaped to hold you without turning entry into a manoeuvre. On a car you use rather than display, that is worth more than it sounds.
The measurements
750mm high, 460mm across the shoulders, 720mm front to back, on a 400mm base, at 7kg.
The 400mm base is the figure that matters. That is the width down at floor level, between the sills and clear of the transmission tunnel, and it is what gets this seat into cars where a normal one will not go. Standard sports seats have a base in the 500mm to 560mm range and simply foul the tunnel or the sill top rails.
Measure your own car at floor level between the sill and the tunnel, and compare it to 400mm. If it is close, send us the figure and we will check it against a seat before you order.
Measure between the sill and the tunnel in your own car before ordering. Marlins vary depending on the build.
Harness holes at extra cost, not addable after trimming. Road and Track approved rather than FIA homologated. Base mount. Seat only.








