Mitsubishi Eclipse 2G Bucket Seat and Fitting Guide
Choose the seat around the Eclipse’s cockpit and actual body
If you are planning seats for a second-generation Eclipse, we would begin with the car’s build and body details. Planted lists the joint Eclipse and Eagle Talon application for 1995-1999 under SB236. That gives us the bracket family to check with the actual car and chosen seat.
Garreth would try the cushion and bolsters before choosing the cabin finish. Cameron would include the lower hardware and the room beside the console in the position trial. Tell us whether the enquiry is for a coupe or a Spyder so the body details go into that check.
At a glance
- Start with the second-generation Eclipse and the maker’s 1995-1999 SB236 application.
- Include coupe or Spyder, build details and actual steering arrangement in the enquiry.
- SB236DR identifies physical left and SB236PA identifies physical right.
- Match the runner to the exact Standard or Alternate bracket pattern.
- Trial the completed height and reach with the intended occupant and any helmet.
- Check inner bolsters, controls and any optional armrests beside the console.
- Choose a belt or harness with the exact seat and intended anchorage arrangement.
Identify the 2G body and existing floor connections
Mitsubishi describes the second-generation Eclipse’s wraparound cockpit and console angled towards the driver. Its history also records the Spyder variant. We would include the inner bolster and control positions when checking a new seat in that cabin.
Send the actual build, body and original-market details with your enquiry.
Cameron would ask about the drivetrain and photographs of the existing lower connections. Include any previous repair or cage-related work around the floor. The SB236 family listing still needs confirming against those actual car details.
Quote the SB236 bracket with the complete seat assembly
The joint Eclipse and Eagle Talon product below carries the shop reference SB236. The listing identifies two side-specific variations, SB236DR and SB236PA. Confirm the supplied physical side and full reference with us before ordering.
One bracket choice does not specify every upper connection.
Garreth would choose the seat shape from how it feels during entry and use. Cameron would add its exact runner and any shell supports to the quotation. A pair should list the full assembly for each physical position.
-
From £224.95 Incl. VATFrom £187.46 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Keep left and right beside the maker reference
Planted’s Driver description identifies the physical left for this application. Passenger identifies the physical right. The shop uses RHD Passenger for the left and RHD Driver for the right.
On a left-hand-drive Eclipse, the driver sits on the physical left.
Describe the car’s actual arrangement to Cameron if it has been imported or converted. Check both positions independently when replacing a pair. Use the physical side and complete code together on the quotation.
| Physical side | Maker reference | Shop option |
|---|---|---|
| Left | SB236DR | RHD Passenger Side |
| Right | SB236PA | RHD Driver Side |
Try the fixed seats for support and everyday entry
The Sparco Sprint, Cobra Monaco Pro and BRIDE ZETA IV give you three fixed-seat options to try. Compare the support around your shoulders and hips. Include the way you get over the bolsters when entering the Eclipse.
Garreth would settle that seat shape before working through its finish. Cameron would check the exact shell and lower assembly beside the door and console. Keep room for the buckle and any runner control in the completed position.
-
From £252.00 Incl. VATFrom £210.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,211.39 Incl. VATFrom £1,009.49 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Read the ZETA IV drawing as four separate measurements
BRIDE gives the ZETA IV drawing 560mm outer shoulder width and 460mm lower front width. It also gives 890mm overall height and 710mm side-view length. The four bars use one common scale for those published measurements.
Use the exact shell version for the comparison and the seat trial.
Cameron would check the shoulder area beside the door and the lower bolsters beside the console. Include all lower hardware when checking the height. These outer dimensions do not identify occupant space or establish cabin clearance.
Compare the backrest, cushion and armrest requirements
The cloth-trimmed Sparco R100 is a reclining option to try alongside the fixed seats. Check the actual cushion and adjustment controls on the version you choose. Include their space beside the door and console in the trial.
Cobra’s Daytona has an integrated head restraint and recline adjustment on both sides. Try its complete backrest shape when comparing the seats. Garreth would include front entry and the driving posture you normally use.
BRIDE describes armrests as optional accessories for the EUROSTER II CRUZ. Confirm the exact seat version and contents of the supplied package. Any armrest needs its own clearance check beside the console, door and controls.
Cameron would match each chosen seat to the complete lower assembly.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £599.00 Incl. VATFrom £499.17 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,265.47 Incl. VATFrom £1,054.56 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Match the bracket version to the exact runner
Planted offers Standard and Alternate slider patterns. Standard includes the Recaro connection; Alternate replaces that pattern with Cobra and Scheel-Mann. Confirm the full runner reference and supplied bracket version together.
Cobra’s narrow and wide runners need different checks at that lower connection.
A wide Cobra runner requires its specified Alternate pattern or the maker’s described change to Standard. Put the actual runner version on the enquiry with Cameron. A seat brand name alone cannot identify every fixing interface.
Check the Sparco runner on the chosen assembly
Include the Sparco runner below if sliding adjustment is part of the proposed package. Match its upper fixing to the seat or shell supports. Match its lower fixing to the supplied SB236 bracket pattern.
Check access to its handle from the normal seated position.
Cameron would check that both tracks move and lock through the useful range. Repeat that check with the completed seat in the car. Include the runner when comparing the final height with the original position.
Specify the Cobra runner width and supplied version
For a Cobra seat package, identify the exact runner version on the quotation. The premium runner listing below needs the same narrow-or-wide pattern check. Confirm the connection to the actual seat as well as the lower bracket.
Garreth would try the completed position before deciding on the trim.
Check the runner control and locking action with the assembly in place. Keep the recline controls and buckle accessible through the range you need. Cameron would confirm the full component references together.
-
From £84.00 Incl. VATFrom £70.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Choose side mounts for the exact seat and lower connection
A side-mounted shell needs supports that match its mounting points and intended lower assembly. The Sparco steel supports below are an option to check for that combination. Include the shell, support and runner references in the same enquiry.
The support position contributes to the backrest angle and finished height.
Trial the complete assembly before finalising its position. Follow the selected components’ connection and fixing instructions. Cameron would confirm both interfaces using those exact parts.
Measure the finished position with the intended occupant
Compare the new seat, cushion and all lower hardware with the original position. Include the selected supports and any runner. The bracket application alone gives no guaranteed net lowering figure.
Wear the intended helmet during the trial if it will be used in the Eclipse.
Cameron would check the roof and pillars at the chosen backrest angle. Include full pedal movement and comfortable wheel reach. Work through the useful sliding range with the people who will use that seat.
Include the console, roof and rear-access requirements
Mitsubishi’s angled-console cockpit gives us a reason to include the inner bolster and controls in the trial. Check them with the seat set for its normal occupant. Include any armrest selected for a reclining seat.
For a Spyder enquiry, include roof-closed clearance in the completed-position check.
If people use the rear seats, try the complete route behind the proposed front assembly. Check any release, forward movement and usable sliding range. Garreth would settle those practical movements before choosing fixed buckets or recliners.
Choose the restraint with the exact seat and anchorages
Tell Cameron which belt or harness you plan to use. Match its full reference and the exact seat instructions to the actual anchorage arrangement. An SB236 application by itself does not establish a complete harness installation.
Include the buckle and belt path in the final position trial.
For a competition harness, provide details of the intended anchorages with the enquiry. Follow the component manufacturers’ routing and adjustment instructions. Check that the restraint remains accessible from the seated position.
Confirm the assembly route before final fitting
Use the Planted instructions for the actual base-mounted or side-mounted seat assembly. Its routes also distinguish sliding adjustment from fixed mounting. Identify the supplied parts and fixing specifications before the installation is assembled.
Record the original seating position to use during the trial.
Check the bracket against the actual floor connections, including previous repairs or alterations. Follow the exact seat, support and runner instructions for assembly. Verify the completed movement and locking after the position is secured.
Common questions
Which Eclipse generation does this guide cover?
It uses the second-generation Eclipse and the maker’s joint 1995-1999 SB236 application. Send the actual build, body and original-market details before ordering. The first generation and later generations need separate fitting applications.
What should I tell you if the car is a Spyder?
Include that body detail with the build information and photographs of the floor connections. Confirm the complete bracket and seat package for the actual car. Include roof-closed clearance in the position trial.
Which bracket reference is for physical left?
The maker identifies SB236DR as physical left. The shop variation uses the RHD Passenger Side option. In a left-hand-drive Eclipse, that is the driver’s position.
Which reference is for physical right?
The maker identifies SB236PA as physical right. The shop variation uses the RHD Driver Side option. Describe the actual steering arrangement so the quotation identifies the intended side.
What do I need for a pair of seats?
Specify one complete assembly for each physical side. Include each exact seat, its runner or fixed connection and any upper supports. Trial both completed positions before finalising the parts.
Which runner pattern should I choose?
Match the exact runner to Planted’s Standard or Alternate bracket version. Cobra narrow and wide runners have different lower-connection requirements. Ask Cameron to check the full supplied references together.
Will a bucket seat give more headroom?
The finished height depends on the seat, cushion and all lower hardware. Compare the proposed assembly with the original position using the intended occupant and helmet where relevant. The bracket listing alone does not give that result.
Are EUROSTER II CRUZ armrests included?
BRIDE describes them as optional accessories. Confirm the exact seat version, armrests and supplied package contents with us. Include any selected armrest in the console, door and control-clearance check.
Do the ZETA IV dimensions establish cabin fit?
They describe separate outer measurements from BRIDE’s drawing. Trial the exact shell and completed mounting assembly in the actual Eclipse. Occupant comfort and cabin clearance need their own checks.
Can I keep practical access to the rear seats?
Try the complete route with the front seat set for its usual occupant. Include any release, forward movement and usable sliding travel. Reclining adjustment alone does not establish a tip-forward function.
What if the floor or original mounts have changed?
Send photographs and details of any repairs or alterations with the enquiry. The bracket needs checking against the actual lower connections. A standard application alone cannot settle a modified floor arrangement.
What helps you recommend the complete seat package?
Send the build, body and steering details with photographs of the existing fittings. Add the exact seats you want and the movement or rear access you need. Tell us about helmet use so it is included in the finished-position trial.
Garreth’s top tip
Garreth would try the cushion and bolsters with the way you use the Eclipse in mind. Include front entry and any access needed behind the seats. Settle the seat shape and movement before choosing the cabin finish.
Cameron’s fitting view
Cameron would put the actual body and build beside the physical side and full SB236 reference. Match the runner pattern and upper connection to the selected seat. Trial the completed position beside the console and include the appropriate roof-clearance check.
Plan your Mitsubishi Eclipse 2G seat change
Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Manufacturer references: Planted physical-left SB236 application, physical-right SB236 application, application guide, Planted installation instructions, Cobra Daytona, BRIDE EUROSTER II CRUZ, BRIDE ZETA IV dimension drawing, Mitsubishi car history, 1995 Eclipse entry.







