Chevrolet Monte Carlo 1978-1988 Bucket Seat and Fitting Guide
Plan the seat and complete mounting assembly for your Monte Carlo
The 1978-1988 Monte Carlo enquiry starts with the particular coupe and the seat that is in it now. Include the model year, original market and steering position. Show the lower fittings if a bench seat has been removed or an earlier conversion is already fitted. Cameron would keep those details beside the full bracket reference throughout the quote.
Garreth would compare the seat support with the way you use the car. Try entry and the movement you need behind the front seats before choosing the trim. A recliner and a fixed bucket make different demands on that access. Keep the chosen seat and its complete lower assembly together for the fitting check.
At a glance
- This guide covers a 1978-1988 Monte Carlo enquiry, with the 1981 restyle identified separately.
- Planted names SB189 for the 1978-1988 Monte Carlo application.
- Standard SB189DR is physical left; SB189PA is physical right.
- Confirm the Standard or Alternate runner pattern separately from the shop side selection.
- Record the original bench or bucket arrangement and any changed floor fittings.
- A belt or harness needs checking with the actual seat and proposed attachments.
Identify the model year and the 1981 restyle
For a 1978-1980 car, start with the original coupe identification and its current seat arrangement. Chevrolet introduced the downsized Monte Carlo for 1978. Its original launch release describes a two-door coupe. Include the model year and photographs with the fitting enquiry.
For a 1981-1988 car, identify the restyled body and the actual version. Chevrolet’s 1981 release records substantial changes to the body panels and aerodynamics. Planted’s SB189 application covers the full 1978-1988 period. The exact year and lower fittings still belong on the quote.
Include the SS or Aerocoupe identification where applicable, and mention any steering conversion or earlier seat work. The date-led guide covers both periods so their details can be checked together. An earlier Monte Carlo, or a car from the 1995 return onwards, needs its own application check.
Match SB189 to the actual lower fittings
Planted lists SB189 for Chevrolet Monte Carlo 1978-1988. It provides the connection between the vehicle floor and the upper seat components. Quote the complete physical-side reference with the car details. The frame, runner and seat then need compatible connections at every layer.
Show the floor fittings beneath the current seat before selecting the package. Note whether the car had a bench or individual seats, and identify anything that has been changed. Cameron would compare the actual lower connection with the supplied bracket and its drawing. The year range leaves those individual installation details to check.
Keep any existing adapter references with the enquiry. A shared platform name does not specify the complete floor connection in your car. Confirm the proposed assembly before ordering the seat and fittings.
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Order by physical position and runner pattern
The maker’s Standard SB189DR is physical left and SB189PA is physical right. Planted calls these Driver / Left and Passenger / Right. The shop options use right-hand-drive driver and passenger wording. For a left-hand-drive Monte Carlo, write the physical position and full reference on the enquiry so the labels can be matched correctly.
Standard includes the RECARO runner pattern. Alternate substitutes the Cobra and Scheel-Mann pattern and uses a COBRA-SB189DR or COBRA-SB189PA reference. The shop seating-side option does not specify that pattern. Confirm it separately with the actual runner version.
Planted distinguishes narrow and wide Cobra runners. Its guidance says the narrow version needs no modification, while the wide version uses the Alternate pattern. Scheel-Mann runners also use Alternate. Compare the current runner and bracket drawings before selecting the hardware.
| Runner pattern | Physical left | Physical right | Confirm with the order |
|---|---|---|---|
| Standard | SB189DR | SB189PA | Actual vehicle, seat and runner |
| Alternate | COBRA-SB189DR | COBRA-SB189PA | Cobra or Scheel-Mann runner pattern |
Try the seat with the driver and the cabin
Compare the cushion depth and bolster support with the person using the car. Include any headwear intended for that use. Check shoulder room beside the door and console, then try the entry. The quoted seat width is only one part of that trial.
Measure the complete seat and lower assembly in the Monte Carlo. Include pedal movement, steering reach and access to the gear lever or selector. If more than one person drives it, trial the adjustment each needs. Garreth would settle those points before choosing a trim or colour.
Compare recliners for support and backrest movement
The Sparco R100, Corbeau Sportline RRS and Cobra Misano Anniversary are the reclining-seat candidates shown here. Try the cushion and backrest with the driver seated. Reach the adjustment control in the proposed installed position. Check its clearance from the door trim and the other seat.
A folding or reclining movement needs its own cabin trial. Show how you use the rear seats or the space behind the fronts. Include any armrest or seat option in the comparison. Garreth would keep the access you need beside the preferred support shape.
The linked Corbeau RRS offer is a pair of seats. Specify the fittings for each physical position separately. A pair listing does not settle which runner and bracket version each seat needs.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,649.00 Incl. VATFrom £1,374.17 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Check the fixed shell and its mounting arrangement
The fixed-bucket shortlist is Cobra Monaco Pro, Sparco Sprint and OMP TRS-E Velour. Compare the usable cushion and bolster shape with the driver. Trial entry with the actual shell beside the door opening. Include the rear-cabin access you want to retain.
Use the current seat instructions to identify the attachment arrangement for that exact version. A side-mounted shell needs the specified supports between the seat and the lower components. Compare the seat, support and runner drawings together. Keep the required hardware on the same fitting list.
Trial the complete package before deciding its installed position. Work through pedal travel and steering reach with the seat secured for that check. A bracket’s thickness alone does not predict where the driver will sit.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £252.00 Incl. VATFrom £210.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £244.40 Incl. VATFrom £203.67 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Specify the Cobra runner version with its pattern
The Cobra sliding-runner listing offers different handle-width choices. Record the exact option and the seat it will carry. Check the seat-to-runner connection as well as the runner-to-SB189 connection. The width name alone leaves the full assembly to verify.
Include Standard or Alternate in that check. Planted’s distinction between narrow and wide Cobra patterns matters at the bracket. Send the current references and drawings together if a runner is already owned.
-
From £84.00 Incl. VATFrom £70.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Check the Sparco runner at both connections
The Sparco runner is another listed option for the package check. Compare its current drawing with the selected seat or side supports and with the bracket. Confirm the components and hardware supplied for one seat position. A matching brand name does not establish every connection.
Trial the adjustment once the complete assembly is in position. Check that both tracks move and lock through the range the driver needs. Keep access to the release handle clear of the seat and surrounding trim.
Include the supports when the seat requires them
The linked Sparco steel supports are a separate component to compare with a side-mounted seat. Confirm the exact seat instructions, hole positions and supplied hardware. Check the lower connection to the chosen runner or bracket. Support slots leave the complete assembled position to establish.
Record the support setting during the seating trial. Include the resulting pedal and steering reach with the clearance measurements. Cameron would keep that setting and the component references together when checking the package.
Record bench conversions and the access you need
Show the original bench or bucket arrangement and the fittings currently attached to the floor. Photograph both sides if they differ. Keep the labels from any earlier runners or adapters with those pictures. A previous conversion may leave connections that the model-year listing does not describe.
For access behind the front seats, try the exact replacement seat and lower assembly in the coupe. Include the movement of the backrest and runners where those features are fitted. Decide how passengers or luggage will reach that space before finishing the installation.
Trial the complete assembly before finishing it
Identify each component and follow its current fitting instructions. Check the lower connection and the upper mounting layers before final assembly. Include the specified fasteners for each connection. A fitting quote should account for the complete route from the actual floor to the seat.
With the assembly in position, check the driver’s pedal travel, steering reach and control access. Move any runners through the intended range and check their locking. Try entry and the cabin access already identified. Record the clearances and component settings with the car details.
Ask for a package review if a connection or instruction does not match what is on the car. Include photographs and the full references. Do not assume a different lower adapter or a related model’s frame supplies that missing connection.
Plan the restraint arrangement with the seat
For the car’s belt arrangement, show the existing buckle and its attachment. Check the route beside the replacement seat and access with the driver seated. Confirm the required mounting hardware for that actual assembly.
For a harness, include the exact seat, intended use and proposed attachment points. The seat and harness instructions need to be considered with those attachments. We can discuss the harness type and fittings as part of the complete package.
Send the car details and complete component shortlist
Include the Monte Carlo’s model year, body or version, original market and steering position. Show the original seat arrangement, current floor fittings and any earlier adapters. Mark the physical seating position you want to change. These details establish the car to compare with the named bracket application.
List the seat, runner and support references, including anything you already own. Add the full SB189 physical-side code and the Standard or Alternate pattern under consideration. Describe the adjustment and rear-cabin access you need.
Garreth would bring those fitting details into the seat comparison. Try the support and entry with the driver before settling on the finish. We can then work through the particular seat and fitting-kit recommendation.
Common questions
Use this guide for a 1978-1988 Monte Carlo enquiry, with the actual model year, body or version, original market and current lower fittings identified.
The guide keeps 1978-1980 and restyled 1981-1988 identification separate within the full SB189 period. Confirm the exact car and package against the application.
The dates identify the fitting period directly and keep the 1981 restyle visible. Use the actual model year and lower fittings when matching the named bracket application.
No later application follows from SB189 being listed for 1978-1988. A 1995 or newer car needs its own named fitting check.
Include the exact version and photographs of its floor fittings. The full year-range label does not independently establish every body or previous conversion.
Show the original arrangement and the current lower fittings. Confirm the complete floor connection for the proposed individual seat package.
SB189DR is the physical-left Standard bracket in the maker listing. Keep that physical position beside the full reference when matching the shop option.
SB189PA is physical right in the maker listing. The shop describes that position as the RHD driver side.
Specify physical left or right and the full maker reference. Ask for those details to be matched to the shop side option before ordering.
The shop side selection does not specify Standard or Alternate. Confirm the pattern separately with the actual seat and runner references.
Standard includes the RECARO runner pattern. Alternate substitutes Cobra and Scheel-Mann and uses a COBRA-SB189DR or COBRA-SB189PA reference.
Match the exact seat and current runner drawing. Planted says the narrow Cobra version needs no modification; the wide version and Scheel-Mann runners use Alternate.
The shortlist shows Sparco R100, Corbeau Sportline RRS and Cobra Misano Anniversary for a seating trial and exact-version package check.
The linked RRS offer is a pair. Count the required brackets, runners and other fittings separately for each physical position.
The cards show Cobra Monaco Pro, Sparco Sprint and OMP TRS-E Velour, with the current attachment arrangement and complete assembly to verify.
Follow the current instructions for that exact seat version and confirm the supports and their lower connection to the chosen runner or bracket.
Check the named vehicle application, actual floor, current component drawings, supplied hardware and cabin clearance together.
Measure the complete seat and lower assembly in the car with the driver. Include the resulting pedal, steering and control reach.
Trial the access you need with the exact replacement seat and lower assembly. Include any backrest movement and runner travel in that check.
Send their full references and photographs. Their connections and condition need checking with the proposed seat, frame and hardware.
Show the buckle and attachment, then confirm the belt route and access with the actual replacement seat and complete assembly.
Provide the exact seat, intended use and proposed attachment arrangement so the harness type and fittings can be checked with the rest of the package.
Garreth’s top tip
Garreth would try the seat with the driver and the way the Monte Carlo is used. Include entry and the space you need behind the fronts. Keep the preferred seat version with the complete mounting shortlist.
Cameron’s fitting view
Cameron would mark the physical position beside the full SB189 reference, then confirm the runner-pattern version. Show the actual floor fittings and any earlier conversion. Trial the complete assembly with the current instructions before finishing the installation.
Plan your Chevrolet Monte Carlo 1978-1988 seat change
Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Sources: Chevrolet original 1978 model release and 1981 restyle release; Planted physical-left and physical-right applications and current linked shop listings. Confirm the actual car, current component instructions and supplied package when completing the fitting enquiry.







