Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

BMW 3 Series Convertible E93 Bucket Seat Guide

Plan the seat and roof-up position in the E93

The E93 is the two-door 3 Series Convertible with a folding metal roof. Choose and measure the front seat with the roof raised as well as checking it in the open cabin. The completed frame, runner and seat position need to suit how you enter the car and use the rear seats.

Cobra, Corbeau, Planted and QMS have listed fitting options for the E93. Garreth would try the fixed buckets and recliners before choosing the trim. Cameron would check the exact seat version and complete mounting arrangement against the convertible body.

Front three-quarter view of an illustrative modified silver BMW 3 Series Convertible E93 with bucket race seats and red harnesses
Illustrative modified BMW 3 Series Convertible E93, not a customer installation.

At a glance

  • Vehicle: E93 Convertible; keep the year and physical seat side on the enquiry.
  • Cobra tailored route: FRM-06 assembly, with Nogaro-specific side mounts for a Nogaro shell.
  • Corbeau route: base-mounted Classic or Sportline seats, with double-locking runners included.
  • Planted route: SB141 explicitly lists E93; choose a separate runner with its bracket pattern.
  • QMS: SW0105 aluminium platform listed for this body, with the complete seat connection checked before ordering.
  • Measure the whole installation in the car, including height, shoulder clearance and room for the controls.

The Cobra tailored frame for the E93

Our E93 Cobra listing is the tailored route to compare for a Nogaro or Cobra recliner. The maker’s reference sheet identifies the E9x family as SU-BMW-E9X-01L/R and maps it to FRM-06. Keep the car’s year, body and physical side with the chosen seat.

Cobra’s FRM-06 drawings show Premium runners with a narrow or wide handle, plus a spacer bar and seat-dependent belt bracket. Confirm the supplied assembly before adding another runner. Nogaro-specific side mounts are separate.

Nogaro Circuit, Street and Club Sport

Compare the Nogaro versions by belt routing as well as trim. The Street has no harness slots; the Circuit and Club Sport provide harness-slot options. Garreth would try the shell first, then choose the version that suits the intended belt arrangement.

All three need the fitting hardware checked with the actual seat version. The shoulder bolsters and lower sides are separate clearance checks in the car. A listed vehicle frame does not establish that every driver and seat position will suit the shell.

Nogaro-specific side mounts

Cobra specifies separate Nogaro side mounts for its tailored-frame Nogaro applications. Use the Nogaro-specific fittings when matching the shell to the lower assembly. Confirm the supplied quantity and the hardware needed for a complete seat position before ordering.

Cameron would trial-position the shell with the mounts and runner together. Check the release handle, door-side bolster and buckle clearance through the useful sliding travel. Set the driving position before judging the final height.

The Cobra Le Mans reclining route

The Le Mans is a base-mounted Cobra recliner to try alongside the fixed Nogaro shell. Its moving backrest changes how you set the seat for a longer journey. Check the actual seat version against the tailored frame and handle arrangement.

Garreth would sit in both before deciding which support feels right. Cameron would try the recliner controls beside the console and door with the complete lower assembly fitted. Include how much adjustment each driver needs when you send the enquiry.

Identify the Cobra runner and handle

Use the Premium runner listing to identify the slider and handle when checking a Cobra kit or an existing conversion. Check what is supplied with the tailored frame before adding another runner set.

Cobra base-mount centres, drawn to scale

Cobra’s mounting guide gives a narrow base pattern of 292mm across and 330mm front to back. The drawing below shows those seat-side centres to scale. It is a reference for the base-mounted route and does not describe a Nogaro shell’s side fixing holes.

Seat-side bolt centres 292 by 330 millimetres, drawn to scale292mm across330mm front to rearSeat-side bolt centres; outer frame outline is schematic

Cobra also publishes a 405mm-wide arrangement. Match the current seat and FRM-06 drawing before choosing the handle width. The outline is schematic and does not show BMW floor bolt positions.

The Corbeau E93 kit with runners

Our Corbeau listing names the E93 Convertible. Match it with a base-mounted Corbeau Classic bucket or Sportline recliner. The kit family includes double-locking runners.

Keep the seat model and physical side with the order. Confirm the supplied layout before assembling the parts. This route is for base-mounted seats, so a side-mounted shell needs a different fitting plan.

Corbeau Classic, Alpine and GT8 seats

The Classic offers Standard and Wide choices, while the Alpine adds quilted trim details. The GT8 gives Garreth a high-backed retro shape to compare. Try the actual width and backrest shape before choosing the finish.

Choose the intended headrest and harness-grommet configuration with the seat. Check the cushion and shoulder clearance in the car with its lower fittings beneath it. The scale drawing below compares the Classic and GT8 base envelopes.

The Corbeau Sportline RRS low-base recliner

The RRS is a reclining option to try on the Corbeau route. Keep the base-mounted seat with the kit’s included runners when planning the order. Its low-base name does not give an installed-height change relative to the original BMW seat.

Compare the Classic and GT8 base sizes

The Classic Standard base measures 470mm wide by 550mm deep in Corbeau’s current drawing, while the Wide is 500mm by 550mm. The GT8 base is 490mm by 540mm. The three rectangles show those A and B dimensions at one scale so you can compare the bases directly.

Corbeau seat base envelopes drawn to the same scale: Classic Standard 470 by 550mm, Classic Wide 500 by 550mm, GT8 490 by 540mmClassic Standard470mm wide550mm deepClassic Wide500mm wide550mm deepGT8490mm wide540mm deepMaker dimensions A and B; rectangles show base envelopesCheck bolsters, controls and mounting height separately in the car

Use these seat-base envelopes to plan your measurements, then check the shoulder bolsters and controls separately. The frame and runner also affect the installed position. Cameron would measure the completed assembly in the car before deciding on the seat height.

The listed QMS SW0105 aluminium platform

Our QMS SW0105 listing includes E93 in its BMW application. This is another vehicle-connection option to discuss with the exact seat model. Confirm the seat fixing layout, any runner and all required hardware as one assembly before ordering.

The Planted SB141 route

Planted explicitly lists E93 in its E90/E91/E93 SB141 application, labelled 2006 to 2013 by the maker. The bracket provides the vehicle connection for a separate matched seat assembly. Choose the actual seat, runner and any side mounts together.

Order by physical left or right as well as steering side. Planted’s driver/left label follows left-hand drive, so a UK driver sits on the other physical side. Photograph the existing mounts if the interior has been changed.

Confirm the physical side of the car

Our Cobra listing offers UK driver and passenger selections. Cobra’s FRM-06 drawing shows the UK driver assembly, with the spacer bar and seatbelt bracket on opposite sides for the passenger arrangement. Keep the actual seat model with that side selection.

Cameron would trial-position the full assembly and check access to the buckle and runner release. Photograph the current mounts if an earlier owner has changed the interior.

Choose the Planted pattern with the runner

Planted’s standard pattern includes the RECARO slider connection; its alternate replaces that with the Cobra/Scheel-Mann connection. Choose the bracket version with the exact runner. The narrow and wide Cobra runners have different requirements in Planted’s instructions.

For a wide Cobra runner, compare the alternate-pattern SB141 before planning any alteration to the standard bracket. Cameron would want the runner model and photographs of its fixings if you already own the parts. Confirm the whole connection before ordering the remaining fittings.

Sparco buckets on the Planted route

The Sprint Retro and Sprint Sky give you two finishes to compare in the Sprint family. The Evo QRT Sky is a side-mounted shell and adds compatible side mounts to the assembly. Garreth would try the cushion and backrest shape of each before selecting the finish.

Match the actual Sprint version and mounting choice to its runner. With the Evo, check the side mounts at both the shell and slider connections. Trial-position the full assembly for pedal reach, steering-wheel reach and shoulder clearance in the car.

The sliding runner for a Sparco assembly

The Sparco sliding runner is the separate slider to compare for the Sparco examples above the SB141. Match the connection to the chosen seat base or side mounts. Try the release and locking action throughout the travel with the complete assembly in the car.

Side mounts for the Evo QRT Sky

Compare these Sparco steel side mounts for the Evo QRT Sky on the Planted route. Check both the shell and runner connections with the actual parts. The adjustment in the mounts helps establish the angle, with the finished height measured in the car.

Recliners to compare above the Planted bracket

The Sparco R100 and GT offer different cushion and backrest shapes to try, while the RECARO Expert S has adjustable backrest side bolsters. These examples use their own matched runner connection above the Planted bracket. The Expert S shown here belongs to this Planted route.

Garreth would set the backrest to a normal driving position and spend time sitting in each option. Cameron would then check the adjustment controls and the travel needed by each driver. Check the finished height with every fitting beneath the cushion.

A Recaro-width runner for the Expert S

The Endurance RECARO-compatible runner is the slider to compare for the Expert S on the standard-pattern SB141. Match the actual seat and runner connections before ordering. Measure the full assembly with the bracket and slider beneath the cushion.

Measure the Expert cushion and the space above it

RECARO’s Expert S/M drawing gives a maximum cushion envelope of 520mm wide and 545mm deep. Those dimensions exclude mounting hardware. The maximum overall seat height is 820mm, with shoulder clearance checked separately in the car.

RECARO Expert S and M maximum cushion envelope, 520mm wide and 545mm deep, drawn to scale520mm maximum cushion width545mm maximum cushion depthExpert S/M cushionPlan envelope, not a seat templateRECARO dimensions exclude all mounting hardware

Use this cushion envelope when measuring the E93, then check the actual seat’s shoulders and controls separately. The frame and runner sit outside these seat-only dimensions. Measure the completed assembly in its intended driving position.

Check the complete assembly for the chosen route

Planted’s installation instructions start with a trial fit of the vehicle bracket, followed by the seat assembly and a check of the complete position.

  • E93 Planted base-mounted sliding seat: vehicle floor, SB141, matched runner, seat.
  • E93 Planted side-mounted sliding shell: vehicle floor, SB141, matched runner, compatible side mounts, shell.
  • Cobra tailored route: follow the FRM-06 layout for the actual seat and physical side, adding Nogaro-specific mounts for a Nogaro.
  • Corbeau route: keep its vehicle kit and included runners with the base-mounted Classic or Sportline seat.

Follow the current instructions for the actual components, checking the floor connection and every fixing above it before the assembly is finally tightened.

Select the harness around the completed seat installation

The TRS Clubman four-point options give you clip-in or bolt-in end fittings to discuss with the intended anchor arrangement. The Schroth Profi 3×2 is a six-point option for an appropriate shell and full installation. Choose the seat and belt routing together, including the crotch-strap provision needed for a six-point belt.

Send photographs of the space behind the seats with the enquiry. Follow the harness maker’s current fitting instructions for the anchors and routing. A cage tube or harness bar is an anchor only where its maker specifies that use.

Measure the seat with the hardtop raised

Check headroom with the roof raised and the complete seat assembly in place. Keep any proposed harness routing and anchor hardware clear of the roof mechanism’s movement. Include photographs behind the seats so the intended arrangement can be checked with the convertible body.

Details for your E93 seat enquiry

Send BMW 3 Series Convertible E93, year, steering side and physical seat side, plus the exact seat model and your height and waist. Include photographs of the existing mounts and clearance beside the tunnel and door. Tell us how much adjustment each driver needs.

For a harness installation, show the space behind the seats and the roof mechanism. Check the proposed seat, belt routing and anchors together before the order is finalised.

Common questions

The BMW 3 Series E93 Convertible. Include the year, body and physical seat position so the fitting route is matched to the actual car.

Choose the seat first, then compare the matching lower assembly. The Cobra, Corbeau and Planted routes have different arrangements, and the QMS platform needs its complete seat connection checked.

Its kit family includes double-locking runners for base-mounted Classic and Sportline seats. Keep that assembly together when planning the order.

A sliding SB141 installation uses a separate matched runner. A side-mounted shell also needs compatible side mounts above that assembly.

Use the tailored frame assembly and Nogaro-specific side mounts. Check the supplied runner and handle arrangement before adding another slider set.

Planted’s driver/left label follows left-hand drive. Order by physical side and steering position to identify the right-hand-drive seat correctly.

Measure the complete seat and fitting assembly with the hardtop raised. Check the shoulders and controls separately from the cushion envelope.

Garreth’s top tip

I would choose the E93 seat with the roof-up driving position in mind. Try the fixed shells and recliners before deciding on a finish for the open cabin. The support and movement you need should decide the shortlist.

Cameron’s fitting view

I would start with E93, year, physical side and the exact seat version. Keep each fitting route’s own components together when checking the order. I would trial-position the completed assembly for reach, height and clearance before the fixings are finally tightened.

Plan your BMW 3 Series Convertible E93 seat change

Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text