Acura TL 2004 to 2008 Bucket Seat and Fitting Guide
Set the support and driving reach for your TL
Choosing seats for a 2004 to 2008 TL starts with the position you want behind the wheel. Garreth would compare a reclining seat for regular longer journeys with a fixed bucket for a more focused build. Try the support with the driver before choosing the finish.
Cameron would also ask whether your TL is manual or automatic and which seats it has now. We list the Planted SB258 bracket for this generation. Use it with the exact seat and lower components on one fitting enquiry. Include the adjustment you need to reach the pedals and gear lever comfortably.
At a glance
- Application: Acura TL 2004 to 2008, with the exact model year, trim and original market identified.
- Vehicle bracket: Planted SB258 with separate left and right references.
- Gearbox: include manual or automatic when describing the driving position and control access.
- Runner pattern: confirm Standard or Alternate with the complete seat and runner references.
- Seat choices: compare reclining adjustment with fixed-back support and the entry you want.
- Harnesses: specify the seat, intended use and attachment arrangement together.
Identify the model year, gearbox and original seats
The 2004 TL introduced the third generation, with manual and automatic versions available. Acura updated the range for 2007 and brought back the Type-S. Send the actual model year and trim when planning a seat change. The earlier 1999 to 2003 TL has its own SB179 application.
Honda describes a powered driver’s seat and memory adjustment in the 2004 car. Write down the comfort and adjustment features you use now, along with the support you want to change. Compare those needs with the specification of the proposed aftermarket seat.
Start the lower assembly with the SB258 reference
Our linked Planted listing names Acura TL 2004 to 2008 and uses the SB258 family reference. Match the supplied bracket to the exact car, original market and physical seat position. Photographs of the current floor connections help Cameron compare what is already fitted.
Specify the seat, runner or fixed connection, any side supports and the required hardware as one assembly. Check what comes with each component before adding more parts. If you are changing both front seats, count the lower fittings for each position separately.
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Match the physical side before selecting the runner pattern
Planted identifies SB258DR as physical left and SB258PA as physical right. Its driver and passenger wording follows the usual US left-hand-drive application. Our shop uses RHD seating-side labels, so include your actual steering arrangement when selecting the option. Keep the complete code with the intended physical position.
The current shop selection identifies the side. Confirm the supplied Standard or Alternate pattern with us as part of the package. Standard includes Planted’s RECARO slider pattern; Alternate exchanges that pattern for Cobra and Scheel-Mann. Wide Cobra runners use Alternate, while the narrow Cobra runner pattern is included on both versions.
| Physical position | Standard pattern | Alternate pattern |
|---|---|---|
| Left | SB258DR | COBRA-SB258DR |
| Right | SB258PA | COBRA-SB258PA |
Planted normally develops its brackets around US LHD vehicles and asks for checks on other markets. It notes that some Canadian Acura and Honda floors differ. Send the chassis details and floor photographs for a different market specification or a related Honda model.
Try reclining seats with the controls within reach
Compare the Sparco R100 in cloth, the Corbeau Sportline RRS and the Cobra Misano Anniversary for a comfort-led TL. Sit in the actual seat and adjust the backrest to the position you would use. Check the cushion support and room to operate the recline controls.
The linked RRS offer contains two seats, so allow for the required lower assemblies if fitting both. Garreth would choose the support and adjustment first. The trim choice can then follow the specification you want in the car.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,649.00 Incl. VATFrom £1,374.17 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Choose fixed-back support with the driver in position
The Cobra Monaco Pro, Sparco Sprint and OMP TRS-E Velour are fixed-back candidates to compare for a more focused build. Try the cushion depth and bolster support with the driver. Check the mounting instructions for the exact version before specifying its base or side-mounted arrangement.
For a manual TL, include full clutch-pedal reach in the trial. Check your arm position at the wheel and gear lever as well. Garreth would judge that position with the proposed lower assembly underneath the seat. Confirm entry and cabin clearance before completing the choice.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £252.00 Incl. VATFrom £210.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £244.40 Incl. VATFrom £203.67 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Select the Cobra runner version with the seat
The linked Cobra runner is a part to discuss with a Cobra seat and SB258 bracket. Match the actual runner version and fixing pattern to both ends of the assembly. Include its handle and required hardware in the quote.
Try the fore-and-aft travel with each person who drives the car. Both tracks need room to move and lock through the range you intend to use.
-
From £84.00 Incl. VATFrom £70.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Check both connections of the Sparco sliding kit
Compare the linked Sparco runner kit with the selected seat connection and the supplied Planted pattern. Use the current component references and drawings to match each interface. Add any supports, spacers and fixings needed by that arrangement.
Cameron would measure the complete sitting position with the runner fitted. Try pedal reach and headroom with the driver, including any headwear intended for the car.
Use the supports specified for the chosen seat version
The linked Sparco steel side supports are a candidate for an appropriate Sparco side-mounted combination. Check the seat’s instructions and support spacing with the connection below them. A base-mounted seat uses the connection specified for that version. Include the complete lower arrangement when asking us to confirm the parts.
Trial the floor bracket and the complete driving position
Planted provides separate instructions for bottom-mounted and side-mounted seats, with sliding or fixed arrangements. Follow the route that matches your proposed components. Trial the bracket against the actual floor connections before assembling the upper parts.
Check the complete seat beside the door and centre console through the movement you need. Include buckle access, the gear lever and parking-brake controls in that trial. Leave the rear-seat space you want to keep. Use the current component instructions to specify hardware and final tightening.
- Confirm model year, trim, gearbox, original market and physical side.
- Match the complete SB258 code and supplied pattern to the upper components.
- Check the parts supplied and quantities for each seat position.
- Trial the driver, controls, adjustment and cabin clearance together.
Include the belt arrangement in the fitting enquiry
Tell us whether you want to retain the car’s belt arrangement or specify harnesses for a particular use. Show the actual buckle and its connection with the chosen seat details. Check the route and access with the assembly in its finished position.
For harnesses, include the exact seat, intended use and proposed attachment points. We can then discuss the harness type and fittings for that installation.
Send the seat and gearbox details with your shortlist
Include the model year, exact trim and gearbox, with the chassis details and original market. Photograph the current seats and floor connections, showing any earlier adapters. Tell us which physical position you are changing and the steering side.
Add the full references of any parts you already own. List the comfort features and adjustment you want in the finished car. Cameron would use that information to compare the proposed interfaces and driving position. We can then prepare a seat and fitting-package quote for your TL.
Common questions
Planted lists Acura TL 2004 to 2008 under SB258. Send the exact model year, trim and original market to check the supplied bracket against your car.
Include the gearbox in the enquiry and trial the complete seat position for full clutch-pedal travel, gear-lever reach and access to the other controls.
Include the model year, gearbox and original seat details. Acura brought the Type-S back for the 2007 model year. Photograph the current floor connections for the fitting comparison.
Use the application named for your actual model year. Planted lists the 1999 to 2003 TL under a separate SB179 reference. Confirm the supplied SB258 assembly for the 2004 to 2008 car.
Planted identifies SB258DR as physical left and SB258PA as physical right. Match those codes to your steering arrangement and the shop’s seating-side labels.
Send the full seat and runner references with the bracket enquiry. Confirm Standard or Alternate separately from the native side option. Planted distinguishes the patterns for the different runner connections.
Confirm the functions and connections of the exact replacement seat when specifying the package; SB258 identifies the vehicle bracket.
The cards show the Sparco R100 in cloth, Corbeau Sportline RRS and Cobra Misano Anniversary. Compare the exact seat version with the complete fitting arrangement proposed for your TL.
The linked RRS listing contains two seats, so count the required brackets and other lower components for each position you are fitting.
Use the mounting instructions for the exact seat version to choose its side supports, base connection or other specified arrangement.
Send the original market, chassis details and floor photographs for an application check. Planted asks for confirmation beyond its usual US LHD development basis.
Measure the chosen seat and complete lower assembly in the car with the actual driver, including the runner or fixed connection and supports.
Send the exact seat, intended use and proposed attachment arrangement first. Confirm the mounting points for that installation. We can then discuss the harness type and required fittings.
Garreth’s top tip
Garreth would try the seat for the journeys and driving position you actually want from the TL. Compare the support, entry and adjustment before deciding the finish. Keep that seat specification beside its complete fitting quote.
Cameron’s fitting view
Cameron would keep the model year, gearbox, original market and physical side with the SB258 reference. Match the supplied pattern and upper components together. Trial the complete position and access to the controls before confirming the assembly.
Plan your Acura TL 2004 to 2008 seat change
Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Sources: Honda’s 2004 TL press kit; the 2007 TL and Type-S press kit; Planted’s application guide, pattern and market guidance and assembly instructions; linked shop listings. Confirm the actual car and supplied component versions when completing the package.







