Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Honda Accord bucket seat guide (2018–2022)

Tenth-generation North American sedan

Planted lists SB338 for the tenth-generation Accord. Honda identifies the North American tenth-generation range as 2018-2022, so use the original generation and market when choosing the bracket.

The seat, runner and lower frame need checking as an assembly. Tell us which front position you are changing and what equipment is attached to the original seat, then choose the mounting method and adjustment you need.

Modified silver tenth-generation Honda Accord sedan viewed from the front at a circuit paddock
Modified tenth-generation Accord shown for illustration. Confirm the fitting kit for your exact car.

At a glance

  • Fitting-kit starting point: Planted SB338 for the named tenth-generation application.
  • Honda places this North American generation in 2018-2022; the eleventh generation starts with the 2023 model year.
  • Standard SB338DR is physical left, labelled RHD Passenger Side in our shop. SB338PA is physical right, labelled RHD Driver Side.
  • Standard and Alternate upper patterns are separate from physical side. Our current frame form selects side only.
  • Count one handed lower frame per position and one matched runner for each seat needing sliding adjustment.
  • Confirm the actual seat base or side supports, then check the finished position with the occupant and the original restraint equipment.

Check your Accord generation

Honda launched the North American tenth-generation Accord as a sedan for the 2018 model year. The range introduced 1.5-litre and 2.0-litre turbocharged four-cylinder engines alongside a hybrid powertrain. Honda’s model timeline places this generation in 2018-2022.

The SB338 product name uses 2018+ within its tenth-generation description. A plus sign does not establish an application for the eleventh-generation Accord, which Honda introduced for 2023. Have the fitting kit for a later car confirmed separately.

Send the original sales market and specification, including whether the car is a hybrid. A UK registration or a broad Accord badge cannot identify the original seat fittings. The earlier SB339 application has its own ninth-generation Accord guide.

Mounting the SB338 fitting kit

SB338 is the vehicle-specific lower bracket in this route. A base-mounted seat connects through its matched base fittings and any chosen runner; a side-mounted shell also needs suitable supports. Include the remaining hardware with the bracket recommendation.

Planted’s fitting FAQ explains its US left-hand-drive development baseline and asks for confirmation of unverified international or right-hand-drive versions. It also flags Honda/Acura Canada-versus-US exceptions. Supply the original market if it differs from the named application.

For two front seats, specify one physical-left and one physical-right frame. Check each original seat’s equipment separately before removal, particularly the passenger position’s sensing equipment. The frame supplies the lower mounting connection; it does not settle the electrical or restraint arrangements.

Left, right and mounting patterns

Standard SB338DR is the maker’s Driver/Left bracket, following its US steering arrangement. Standard SB338PA is Passenger/Right. Our RHD-labelled form calls these positions RHD Passenger Side and RHD Driver Side respectively, so write physical left or right on the order.

Planted also lists COBRA-SB338DR and COBRA-SB338PA as Alternate versions. Standard includes the RECARO slider connection; Alternate replaces that connection with the Cobra/Scheel-Mann pattern. Selecting the seating side in our current SB338 form does not select Alternate.

The maker’s narrow Cobra slider guidance covers both upper patterns. Its wide Cobra and Scheel-Mann guidance requires Alternate. Include the full runner drawing when asking us to confirm the supplied frame pattern, because the seat brand alone does not identify the connection.

Physical sideStandard referenceAlternate referenceShop position label
LeftSB338DRCOBRA-SB338DRRHD Passenger Side
RightSB338PACOBRA-SB338PARHD Driver Side

Runners and seat adjustment

A separate runner must connect to the supplied frame below and the seat base or side supports above. Check both interfaces with the actual parts drawings. Count the runner kits per adjustable front position.

Sparco 0049306 lists a 345 mm by 271 mm pattern. Sparco R100 lists that seat-base pattern too. That shared dimension still leaves the lower connection to SB338 to confirm.

Cobra Premium runners have 291 mm and 405 mm handle-width choices. Use the fixing drawing as well as the handle option, together with Planted’s narrow/wide runner guidance.

The Endurance runner also needs its upper and lower fixings checked. Its universal label cannot establish the whole assembly. Trial the seat’s usable travel and locking operation, with access to the handle beside the finished seat.

Side mounts for fixed-back seats

Sparco SS004902 is a pair of side supports for one seat. Compare the shell’s side fixings and the supports’ lower connection with the proposed runner or frame arrangement.

A two-seat side-mount installation needs two support sets where separate supports are required. Set the proposed height and angle during the occupant trial, before treating the parts list as complete. A recliner using base fixings needs its base connection specified instead.

Bucket seats

Cobra Monaco Pro permits base and side mounting, while Corbeau Sprint X System 1 and OMP Champ-R use side mounting. Choose the method that matches the complete fitting route and compare the exact seat’s dimensions with the car.

The Sprint X here is the System 1 version. Check the selected seat’s actual approval and specification for the intended event; the version name does not establish a competition standard.

Try the occupant at the proposed height and angle with the door closed. Check the shell’s shoulder area against the trim, the buckle space and the reach to the pedals and steering wheel. Include a helmet if one will be worn in use.

The sedan’s rear doors give rear passengers their own access, but front-seat adjustment still needs clearance throughout its travel. Assess both front positions independently when fitting a pair. A larger cabin does not guarantee that every shell and support combination will fit.

Reclining seats

Sparco R100 uses base mounting with a listed 345 mm by 271 mm pattern. Cobra Daytona lists 291 mm by 330 mm. Match the actual supplied seat base through any runner to the chosen SB338 pattern.

The Daytona form requires a base choice separately from the trim, extras and seating side. Include that selection on the quote so the supplied mounting configuration can be checked. Upholstery choices do not choose the base.

The Corbeau Sportline RRS listing contains two Standard-base seats. Vehicle frames and runners are separate purchases, so a pair of seats still needs a complete fitting assembly for each side. Confirm the supplied base drawing before choosing the lower connections.

Operate the recline control with the seat beside the centre console and door trim. Check the full backrest movement and runner travel, then check the buckle remains accessible in the position that will be used.

Seat belts and harnesses

Record the buckle attachment and the restraint or sensing equipment connected to each original seat. Give the installer the exact vehicle specification before removal, including any powered-seat equipment. Decide how the required functions and fittings will be retained as part of the conversion.

TRS 21A300 is the bolt-in three-point Clubman listing; 21B400 is the clip-in four-point version. Both shop listings are marked as unsuitable for HANS. A build needing a frontal head restraint requires a specifically suitable seat and harness arrangement.

The four-point Clubman has shoulder and lap straps. Its name does not include a crotch strap, and the SB338 frame does not establish suitable harness anchorages. Follow the actual seat and harness instructions for the chosen attachment points and routing.

Any cage or harness bar needs a confirmed application for this sedan and the intended layout. Supply the original model details when discussing it. Our harness fitting guide covers the wider planning questions.

Before you fit the seat

Have the original floor fixings checked for damage, corrosion or previous conversion work. Resolve their condition before installing the new assembly, using the instructions for the exact fittings selected.

Trial the finished seat with the occupant and operate each adjustment. Close the door and check the controls and buckle beside the seat. Send floor-fitting and buckle photographs through our contact page or chat with the original vehicle details.

Assembly choiceParts to specifyCheck against the car
Vehicle and physical sideOne handed SB338 frame per front positionOriginal tenth-generation sedan, market and specification
Upper mounting patternActual supplied Standard or Alternate versionSelected runner drawing and seat connection
Sliding adjustmentOne matched runner kit per adjustable seatUpper and lower fixings, locking and travel
Side-mounted shellCompatible supports for each seatShell fixings, mounting height and angle
Reclining seatConfirmed supplied seat baseFixing pattern, controls and backrest movement
Original seat equipmentBuckle and required equipment arrangementsFunctions fitted to each original seat
Occupant and restraint trialFinished assembly and equipment used in the carClearance, reach, belt routing and adjustment

Common questions

Which Accord application does this guide address?

The North American tenth-generation Accord sedan, which Honda places in the 2018-2022 model years, using Planted's named SB338 route after the original specification is confirmed.

Does the bracket listing's 2018+ wording prove a 2023 car fits?

Have the later application confirmed separately. Honda identifies the 2023 model as the start of the eleventh generation.

Is a UK registration enough to choose SB338?

Send the original sales market and model details as well as the registration, because the imported vehicle's original specification determines the application check.

Which Standard code is physical left?

SB338DR is physical left and appears as RHD Passenger Side in our shop's RHD-labelled form.

Which Standard code is physical right?

SB338PA is physical right and appears as RHD Driver Side in our shop.

Does the side selector choose Standard or Alternate?

Our current SB338 form chooses seating side only. Confirm the supplied upper mounting pattern separately.

Which pattern is needed for a wide Cobra runner?

Planted specifies Alternate for its wide Cobra and Scheel-Mann connections; confirm the supplied COBRA-SB338DR or COBRA-SB338PA version with the actual runner drawing.

Are 291 mm and 405 mm the full Cobra fixing dimensions?

Those are the listed runner handle-width options. Use the full fixing drawing to check the mounting connections.

How many vehicle frames does an RRS pair need?

The RRS listing contains two Standard-base seats, so specify one left and one right vehicle frame plus the remaining matched fittings for each position.

Does one SS004902 pair support both front seats?

Each pair of SS004902 supports is for one seat; two side-mounted seats need two sets where separate supports are required.

Can Monaco Pro use either mounting method?

Monaco Pro permits base and side mounting. Choose the connection to suit the actual seat version and the complete fitting route.

Does Daytona trim select the seat base?

The form requires a separate base choice, so include it with the trim and seating side when checking the supplied configuration.

How does Sparco R100 mount?

R100 is a base-mounted recliner with a listed 345 mm by 271 mm pattern; its runner and lower-frame connections still need checking.

Does the four-point Clubman supply a crotch strap?

TRS describes shoulder and lap straps for this version. Follow the actual restraint instructions for the required layout and anchors.

Can these Clubman listings be assumed suitable for HANS?

Both shop listings are marked as unsuitable for HANS. Choose a specifically suitable restraint arrangement if a frontal head restraint is required.

What information helps complete the recommendation?

Send the original model year and market, specification including hybrid status, steering arrangement, physical side, exact seat and intended use, plus photographs of the floor fittings and buckle.

Ordering checklist

I would keep the original model year and market beside the full bracket code on the quote. That makes the tenth-generation application clear when the listing uses 2018+, and keeps the physical-left or physical-right order separate from its upper pattern.

Then count the fittings per position. The RRS package already has two seats, while each side still needs its own vehicle frame and any runner or supports required by the chosen assembly. Put the actual seat base on the parts list before settling the trim.

Workshop checks

I would identify the equipment attached to both original seats before planning their removal. Clear photographs of the floor fittings and buckle help with an imported car, alongside its original specification.

Trial the complete driving position with the occupant and the door closed. Check the adjustment handle and recline control where fitted, with the buckle accessible beside the seat. Use the actual supplied parts drawings to settle the mounting connections.

Need help with your Accord?

Drop us an email or open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.

Back to the Car Seat Selector guide.

Application references: Planted’s left SB338, right SB338 and fitting FAQs. Honda’s 2018 Accord press kit and Accord model timeline identify the generation; mounting compatibility requires its own application check. TRS’s four-point Clubman specification describes the restraint layout.

Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text