Honda Accord ninth-generation bucket seat guide (2013-2017)
Build a seat assembly for the North American ninth-generation Accord
Planted SB339 is the starting bracket for the North American 2013-2017 Accord. Its handed lower frame connects the car to a separately specified seat assembly, with runners and side supports chosen to suit the exact seat.
An Accord registered in these years can belong to a different regional model range. Send the original market and body details when asking for a recommendation, particularly for an imported or converted car.
At a glance
- Named fitting-kit route: Planted SB339 for the North American ninth-generation Accord, 2013-2017.
- Physical left: SB339DR, labelled RHD Passenger Side in our shop. Physical right: SB339PA, labelled RHD Driver Side.
- Current shop codes correspond to Planted Standard versions; confirm the supplied upper pattern separately if an Alternate connection is needed.
- One handed vehicle bracket is required per front position. A sliding assembly also needs a matched runner for each adjustable seat.
- Side-mount shells need suitable side supports; a recliner needs its actual base connection checked.
- Include the original buckle and seat equipment in the installation plan, with the finished position checked for the occupant.
Identify the original market and body before choosing fittings
Honda introduced the ninth-generation Accord for the 2013 model year in North America, with sedan and coupe bodies. The launch range included 2.4-litre four-cylinder and 3.5-litre V6 engines; a six-speed manual was available in the V6 coupe. Those details help identify the original car.
The SB339 listing names the North American 2013-2017 application. Have the precise body and specification checked against the supplied bracket. Honda’s model history alone does not establish that every body, trim or regional version shares the same seat mountings.
Our Accord 2003-2007 guide covers an earlier application. The tenth-generation Planted bracket is SB338, so keep a 2018-onwards enquiry separate from SB339. Use the original model year and market with the registration details.
Use SB339 as the lower vehicle bracket
The SB339 frame provides the vehicle-specific lower connection. The parts above it depend on whether the seat uses base fixings or side supports, and whether sliding adjustment is required. Price those parts alongside the frame and seat.
Planted develops its brackets from US left-hand-drive vehicles unless stated otherwise. Its fitting FAQ asks for confirmation of unverified international and right-hand-drive applications, with Honda/Acura Canada-versus-US exceptions also noted. Tell us the original sales market if it differs from the named application.
For two front seats, list one left and one right bracket. Identify the original buckle attachment and equipment connected to each seat before removal; the passenger position can have different equipment from the driver’s position.
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Separate physical side from the upper mounting pattern
Planted calls physical left Driver/Left and uses SB339DR for its Standard version. Physical right is Passenger/Right, with Standard code SB339PA. Our shop uses RHD side labels, so the same left bracket appears as RHD Passenger Side and the right as RHD Driver Side.
The maker also lists COBRA-SB339DR and COBRA-SB339PA as Alternate versions. Its Standard pattern includes the RECARO slider connection; Alternate replaces that connection with the Cobra/Scheel-Mann pattern. The seating-side choice in our SB339 order form does not select an Alternate version.
Planted’s narrow Cobra slider guidance covers both patterns, while its wide Cobra and Scheel-Mann guidance requires Alternate. Ask us to confirm the actual supplied pattern with the selected runner drawing before ordering. A Cobra seat name on its own cannot settle that connection.
| Physical position | Planted Standard | Planted Alternate | Shop side label |
|---|---|---|---|
| Left | SB339DR | COBRA-SB339DR | RHD Passenger Side |
| Right | SB339PA | COBRA-SB339PA | RHD Driver Side |
Match the runner above and below
A sliding runner needs a confirmed connection to the lower bracket and to the seat base or side supports. Check both drawings with the supplied SB339 pattern. Count one runner kit for each seat that needs sliding adjustment.
Sparco 0049306 lists a 345 mm by 271 mm mounting pattern. Sparco R100 lists that base pattern too, but the lower connection to the actual vehicle bracket still needs checking.
Cobra Premium runners have 291 mm and 405 mm handle-width choices. These describe the handle options; use the full fixing drawing with Planted’s narrow/wide guidance and the chosen seat base.
The Endurance runner’s universal description also needs checking against the actual fixings. During the trial installation, operate the locking mechanism through the usable travel and check access to the adjustment handle.
-
From £84.00 Incl. VATFrom £70.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Allow one support set for each side-mounted shell
Sparco SS004902 supplies a pair of side supports for one seat. Match the shell’s side fixings to the supports, then check the lower connection to the runner or bracket used in the assembly.
For a pair of side-mounted seats, itemise two support sets where separate supports are required. Trial the available height and angle with the occupant before settling the position. A base-mounted recliner needs its base fittings specified instead.
Choose the shell with its mounting method and occupant fit
Cobra Monaco Pro permits base and side mounting. Corbeau Sprint X System 1 and OMP Champ-R use side mounting. Choose the connection as part of the complete SB339 assembly and compare the dimensions of the exact seat version.
The Sprint X product here is the System 1 version. Its name identifies the product construction; it does not establish an FIA standard or approval for an event. Check the selected seat’s actual specification against the intended use.
Try the occupant in the seat at the proposed height and angle. Check the shoulder area against the door trim and confirm space for the buckle, then check steering-wheel and pedal reach. Include a helmet in the trial if one will be worn.
For a coupe retaining rear passengers, work through the entry and exit movement before choosing a fixed-back shell. Allow the front seat and runner to move through their intended range with the door closed.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £690.00 Incl. VATFrom £575.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Specify the supplied recliner base before the lower fittings
Sparco R100 is a base-mounted recliner with a listed 345 mm by 271 mm pattern. Cobra Daytona lists 291 mm by 330 mm. Both need a matched connection through any runner to the supplied SB339 bracket.
The Daytona order form requires a base choice independently of the trim, extras and seating side. Include that actual base in the recommendation so its mounting dimensions can be checked; selecting the upholstery does not choose the base.
The Corbeau Sportline RRS listing supplies two seats on the Standard base. Vehicle frames and runners are separate parts. Confirm the supplied base drawing instead of assigning one fixing pattern to every RRS configuration.
Check access to the recline control beside the console or door trim. In the coupe, trial the backrest movement and runner travel needed for rear-seat access. A sedan’s rear doors change the access requirement, while the front assembly still needs its full clearance check.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £599.00 Incl. VATFrom £499.17 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Plan the restraint layout with the seat conversion
Establish the original buckle attachment and the restraint or sensing equipment fitted to the actual seats. The installer needs a plan for the required functions before replacing either seat. A lower mounting bracket does not resolve those equipment requirements.
TRS 21A300 is the bolt-in three-point Clubman listing, while 21B400 is the clip-in four-point version. Both shop listings are marked as unsuitable for HANS. If the build requires a frontal head restraint, choose a specifically suitable harness and seat arrangement.
TRS describes shoulder and lap straps for the four-point Clubman. Have the selected harness instructions checked for the car’s actual anchors and routing; the four-point name does not include a crotch strap. A bracket purchase also does not establish suitable harness anchorages.
Any harness bar or cage needs its own body-specific application check. Send the sedan or coupe details with that enquiry. Our harness fitting guide covers the wider installation planning.
-
From £96.00 Incl. VATFrom £80.00 Excl. VATPayPal CreditAmazing valueSelect options This product has multiple variants. The options may be chosen on the product page
-
From £120.00 Incl. VATFrom £100.00 Excl. VATPayPal CreditAmazing valueSelect options This product has multiple variants. The options may be chosen on the product page
Inspect the mountings and quote the whole position
Have the original mounting points inspected for damage, corrosion and earlier conversion work. Resolve their condition before fitting the new assembly. Follow the instructions for the exact bracket, seat and remaining fittings selected.
Trial the complete position with the actual occupant, then operate the adjustments and close the door. For a pair, repeat the checks on the other side. Send clear floor-fitting and buckle photographs through our contact page or chat with the original vehicle details.
| Part or task | Include in the quote | Check before fitting |
|---|---|---|
| Vehicle bracket | One handed SB339 per front position | Original North American application, body and physical side |
| Upper pattern | Actual supplied Standard or Alternate version | Runner connection and full fixing drawing |
| Sliding adjustment | One matched runner per adjustable seat | Both mounting interfaces, locking and usable travel |
| Side-mounted shell | One compatible support set per seat | Shell fixings, lower connection, height and angle |
| Recliner | Confirmed supplied seat base | Base pattern, recline control and rear access |
| Restraints and seat equipment | Buckle, selected harness and required fittings | Anchorage, routing and equipment functions |
| Occupant trial | Finished assembly and equipment worn in use | Door clearance, reach and each adjustment |
Common questions
Which Accord does SB339 name?
Planted names the North American ninth-generation Accord, 2013-2017. Have the exact original body and specification confirmed against the supplied kit.
Does a 2013-2017 registration prove that SB339 fits?
Supply the original model year and market; regional Accord ranges can differ despite overlapping registration years.
Does the guide cover every sedan and coupe automatically?
Honda offered both bodies in this generation. Confirm the precise body and specification with the bracket application before ordering.
Which code is physical left?
Standard SB339DR is physical left. Our shop labels that position RHD Passenger Side, following its RHD side labels.
Which code is physical right?
Standard SB339PA is physical right and appears as RHD Driver Side in our shop.
Does choosing left or right also select Alternate?
The current SB339 order form selects seating side only. Confirm the supplied upper pattern separately if Alternate is required.
What are the Alternate SB339 references?
Planted lists COBRA-SB339DR for physical left and COBRA-SB339PA for physical right. Confirm availability and the supplied pattern with the order.
Which pattern does a wide Cobra runner need?
Planted specifies Alternate for its wide Cobra and Scheel-Mann connections. Compare the actual runner and seat drawings with the supplied bracket.
Do 291 mm and 405 mm describe every Cobra runner fixing?
Those are the listed handle-width choices. Use the full mounting drawing to check the fixing interfaces.
How many SS004902 support sets do two seats need?
Each SS004902 pair supports one seat, so two side-mounted seats need two sets where separate supports are required.
Can Monaco Pro use base or side mounting?
The Monaco Pro permits both methods. Choose the connection to match the complete fitting assembly and the actual seat version.
Is the R100 a side-mounted bucket seat?
R100 is a base-mounted recliner, with a listed 345 mm by 271 mm base pattern. Specify its lower fittings accordingly.
Does Daytona upholstery select its base?
The Daytona form has a separate required base choice. Include that selection with the trim and seating side when checking the assembly.
What is included in the RRS pair listing?
Two Standard-base Corbeau Sportline RRS seats are supplied. Vehicle brackets, runners and remaining mounting parts are specified separately.
Does the four-point Clubman include a crotch strap?
TRS describes shoulder and lap straps for this four-point harness. Check the actual restraint instructions and anchorage plan with the installer.
What should I send for a complete recommendation?
Send the original model year, sales market and body, steering arrangement, physical side, exact seat and intended use, plus photographs of the floor fittings and buckle.
Garreth's top tip
I would put the full handed bracket code and seat base on the quote before deciding on the trim. SB339DR means physical left in the maker’s US naming, so using left and right keeps the order clear when buying through our RHD-labelled form.
For a pair, count the fittings for each front position. The RRS listing already contains two seats; the vehicle brackets and runner kits still need their own quantities. Decide how much adjustment and rear-seat access the car needs before settling on the seat.
Cameron's fitting view
I would start with the original floor fittings and the equipment attached to each seat. On an import, send the original market details with those photographs so the lower bracket can be checked against the actual car.
Then trial the complete assembly with the occupant. Work through the door clearance and driving position, with the buckle and adjustments accessible. Include the coupe’s rear access if those seats will stay in use.
Plan your North American Honda Accord 2013-2017 seat change
Drop us an email or open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Application references: Planted’s left SB339, right SB339 and fitting FAQs. Honda’s 2013 Accord press kit identifies the original model range; bracket fit requires its own application check. TRS’s four-point Clubman specification describes its restraint layout.

![Planted Technology Honda Accord [9th Generation] (2013-2017) Seat Bracket](https://www.sportseats4u.co.uk/wp-content/uploads/sites/2/2026/08/SB339DR-1-300x300.jpg)







