Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Honda Civic coupe and sedan bucket seat guide (2006-2011)

Choose the fitting route for your original coupe or sedan

PCI lists its SM-FG-A1 mount for the 2006-2011 Civic coupe and sedan. This side-mount assembly holds a compatible bucket seat at a position set during installation. Identify the original body, year and market before choosing the physical side.

Honda’s North American eighth-generation range included separate coupe and sedan bodies, with the Si coupe arriving for 2006 and the Si sedan for 2007. An Si badge or an engine conversion does not identify the fitting kit on its own.

At a glance

  • PCI adjustable route: SM-FG-A1, with the maker naming 2006-2011 Civic coupe/sedan.
  • Physical left is SM-FG-L-A1 and physical right is SM-FG-R-A1; confirm the original model and market as well as the side.
  • PCI’s current sliding application uses FG2 codes and states 2006-2010; our FG-S1 listing needs its supplied reference confirmed.
  • Planted SB068 is listed generically for Civic 2006-2011, with a US left-hand-drive development baseline and international applications requiring checks.
  • SB068DR is physical left; SB068PA is physical right. Standard and Alternate upper patterns are a separate choice from side.
  • A1 includes PCI side supports. A Planted lower bracket needs the remaining seat, runner and support connections specified separately.
  • Plan one complete assembly per front position, including the original buckle and any equipment connected to the seat.

Separate the coupe and sedan application from the hatchback guides

Honda introduced the North American eighth-generation coupe and sedan for the 2006 model year. The ordinary coupe and sedan used a 1.8-litre engine, while the Si coupe had a 2.0-litre engine and six-speed manual. These details help identify the original car; the mounting recommendation still follows the actual bracket application.

PCI names both coupe and sedan in its 2006-2011 SM-FG-A1 application. Use that description with the original vehicle details. A registration year or a broad eighth-generation label cannot establish that a UK hatchback or another market specification uses the same fittings.

Our separate FN2 guide and FD2/FN2 overview address different named applications. Keep the original model and market with the enquiry if badges, seats or the engine have been changed.

Use SM-FG-A1 for a position set during fitting

PCI lists SM-FG-L-A1 for physical left and SM-FG-R-A1 for physical right in the coupe/sedan application. These match the references in our shop, where the right option is labelled RHD Driver Side and the left is RHD Passenger Side.

The A1 assembly includes PCI’s standard SM-SIDE-A1 supports, so an extra pair of universal side brackets is not normally required. Match the exact shell and its fixing dimensions to the supplied kit.

A1 lets the installer set the position before securing the assembly. It has no occupant-operated sliding runner. If different drivers share the car, settle the adjustment requirement before ordering.

Specify the full handed reference for each front position. A two-seat conversion needs a left and right assembly, with the necessary seat and restraint fittings for each. Have the whole order checked against the actual car.

Confirm the sliding code and its shorter year range

PCI’s slider list names SM-FG2-L-S1 and SM-FG2-R-S1 for the 2006-2010 coupe/sedan. Our sliding kit is listed with SM-FG-S1 references, omitting the 2. Ask us to confirm the code on the supplied kit before ordering.

The maker’s sliding year range ends at 2010; A1’s 2011 coverage does not extend it. Send the original model and year when asking for a sliding recommendation.

An intended PCI S1 installation is a complete alternative assembly. Adding an unrelated runner beneath A1 needs a separately confirmed mounting assessment. In a coupe, also check whether the finished seat movement leaves the rear access you need.

Check the SB068 application before building a base-mount route

Our Planted SB068 listing and the maker’s product pages name Civic 2006-2011, while our short description also names FN2. Ask us to confirm the bracket for your original vehicle before ordering from the year alone.

Planted develops its brackets from US left-hand-drive models unless stated otherwise. Its FAQ asks for confirmation of unverified right-hand-drive and international versions, and flags Honda/Acura Canada-versus-US floor exceptions. Supply the original market and photographs or dimensions of the mountings for that check.

SB068 is a lower vehicle bracket. Once its application is confirmed, the parts list still needs the runner, seat base or side supports and fixing hardware above it.

Order SB068 only after the vehicle application, physical side and upper pattern have been confirmed together. A broad Civic year range cannot settle those choices.

Specify physical side and upper pattern separately

On a US left-hand-drive car, physical left is the driver’s position. Our shop labels the same physical left position RHD Passenger Side. Use left or right on the parts list to avoid a steering-side mix-up.

Planted supplies Standard SB068DR and SB068PA references, plus COBRA-SB068DR and COBRA-SB068PA Alternate versions. Its Standard pattern includes the RECARO slider connection. Alternate replaces that connection with the Cobra/Scheel-Mann pattern.

The maker’s narrow Cobra slider guidance covers both versions; its wide Cobra and Scheel-Mann guidance requires Alternate. Our current SB068 form selects only seating side. Have the actual supplied upper pattern confirmed separately before choosing the runner.

Physical positionPCI A1Planted StandardShop side label
LeftSM-FG-L-A1SB068DRRHD Passenger Side
RightSM-FG-R-A1SB068PARHD Driver Side

Match both runner interfaces on a confirmed bracket route

Use a separate runner with a lower bracket and seat connection that have been matched for the installation. Itemise the hardware already included in the chosen package; neither PCI kit needs an unrelated runner added by default.

Sparco 0049306 is listed with a 345 mm by 271 mm mounting pattern. The R100 uses that listed base pattern too. Check the runner connection beneath the seat as well as the connection to the actual lower bracket.

Cobra Premium runners have 291 mm and 405 mm handle-width choices. Those labels do not replace the mounting drawing. Use the selected runner specification with Planted’s narrow/wide guidance and the actual seat base.

The Endurance runner also needs both fixing interfaces checked against the assembly. Its universal description does not establish a match. Trial the locking operation and usable travel with the seat in position.

Add separate side supports only where the route needs them

A Planted-based side-mount assembly normally needs supports between the runner and shell. Sparco SS004902 supplies a pair for one seat; match them to the shell and the connections beneath.

Two side-mounted seats need two support sets where separate supports are required. PCI’s A1 kit already includes its standard supports, so itemise that route differently. The runner sits below the side supports in a sliding assembly.

Compare three shells with the proposed fitting assembly

Cobra Monaco Pro, Corbeau Sprint X System 1 and OMP Champ-R offer three side-mount options to assess. Measure the exact shell and try its support with the occupant. Cabin clearance depends on the seat version and the finished mounting position.

The Monaco Pro permits base and side mounting. The Sprint X and Champ-R use side mounting. Use the shell’s side connection with PCI A1; the Monaco’s alternative base fixings need a different mounting route.

Include the finished height and angle in the trial. Check the shoulder clearance at the door, the buckle beside the seat and the reach to the pedals and steering wheel. Use any helmet or other equipment that will be worn in the car.

Choose a recliner with the base route confirmed first

A recliner needs a matched connection from its base through any runner to the vehicle bracket. Consider these seats only with a separately confirmed base-mount parts list; the PCI A1 side kit cannot establish it.

Sparco R100 lists a 345 mm by 271 mm base pattern. Cobra Daytona lists 291 mm by 330 mm. The Daytona order form also requires a base choice separately from trim and seating side, so include the supplied base in the fitting recommendation.

The RRS listing supplies two Corbeau Sportline seats on the standard base. The vehicle frames and remaining mounting parts are separate. Confirm the actual base fixing dimensions instead of assigning one pattern to the whole reclining-seat range.

In the coupe, trial the backrest movement and runner travel needed for the rear seats. A sedan’s rear doors change the access question, but the front seat still needs its full clearance checks. Count each adjustable position independently when quoting the runners.

Check the restraint arrangement with the seat conversion

Honda’s original seat installation can include restraint and sensing equipment. Establish the buckle attachment and any equipment connected to the actual seat before removal. Have the installer identify how the required functions and fittings will be retained.

TRS 21A300 is the bolt-in three-point listing; 21B400 is the clip-in four-point Clubman. Discuss the attachment arrangement for your car with the installer. Both shop listings are marked as unsuitable for HANS. A build requiring an FHR needs a specifically suitable restraint.

The four-point Clubman has shoulder and lap straps; do not assume it supplies a crotch strap. PCI’s sub-belt mounting features also do not approve a whole five- or six-point installation. Follow the selected harness and seat instructions for the actual anchorage and routing.

Specify the exact body before choosing a cage or harness bar. An FN2 or FD2 cage listing does not establish a coupe/sedan cage application. Our harness fitting guide covers the wider planning questions.

Inspect the original mountings and list the whole assembly

Have the trim lifted around the original seat mountings so their condition can be inspected. Resolve damaged fixings, corrosion and previous conversion parts before fitting the new assembly. Use the supplied instructions for the parts actually selected.

Trial the finished driving position with the actual occupant, then operate every adjustment and close the door. Check both front positions for a pair. Send photographs of the floor fittings and buckle through our contact page or chat with the original model and market details.

Route or taskInclude in the quoteOutstanding check
PCI A1 side-mount routeOne handed SM-FG-A1 assembly and compatible shell per seatOriginal coupe/sedan application, side and complete position
PCI S1 sliding alternativeThe confirmed supplied FG2 referenceMerchant FG versus maker FG2 code; 2006-2010 year range
Planted routeOne handed SB068 bracket per seatExact vehicle/market application and supplied Standard or Alternate pattern
Separate sliding assemblyOne matched runner per adjustable positionBoth fixing interfaces, locking and travel
Side-mounted shellSupports appropriate to the selected routePCI included supports versus separate support set
Reclining seatActual seat base and confirmed lower fittingsBase choice, controls and coupe rear access
Restraints and original equipmentCorrect buckle, harness and fixing hardwareAnchorage, routing, equipment functions and intended use

Common questions

Which Civic application starts this guide?

PCI's SM-FG-A1 listing names the 2006-2011 Civic coupe and sedan; confirm the original body and market with the full supplied code.

Does eighth generation mean every Civic sold in these years?

Check the exact application; a generation number does not establish the same fittings for a coupe, sedan, UK hatchback or another market version.

Is the Si badge enough to choose a bracket?

Use the original model and body details, because the North American Si began this generation as a coupe and added a sedan for 2007.

Which PCI A1 is physical left?

SM-FG-L-A1 is physical left and is listed in our shop as RHD Passenger Side.

Which PCI A1 is physical right?

SM-FG-R-A1 is physical right and is listed as RHD Driver Side.

Does the A1 kit slide after fitting?

A1 provides installation-position adjustment without an occupant-operated sliding runner.

Why does the sliding reference need confirmation?

PCI names FG2 S1 references for 2006-2010, while our sliding kit is listed with FG S1 codes omitting the 2. Ask us to confirm the supplied code.

Does the A1 year range prove S1 fits a 2011 car?

Have the sliding application confirmed separately; PCI's current S1 list states 2006-2010.

Does SB068 automatically cover an FN2 or FD2?

Planted's generic Civic 2006-2011 description needs matching to the exact original car; do not infer a specific body or market from the year alone.

What do SB068DR and SB068PA mean?

SB068DR is physical left and SB068PA physical right, following the maker's US left-hand-drive baseline.

Does choosing a side also select Standard or Alternate?

Our current SB068 form selects side only, so confirm the supplied upper pattern separately.

Which Planted pattern is needed for a wide Cobra runner?

The maker specifies its Alternate pattern for the wide Cobra connection; compare the complete runner drawing with the supplied bracket and seat.

Does the Cobra runner handle width describe every fixing dimension?

Use the mounting drawing as well as the selected 291 mm or 405 mm handle-width option.

Do I need SS004902 with the PCI A1 kit?

PCI includes its standard side supports with A1; buy separate supports only where the confirmed assembly requires them.

Can the Monaco Pro use either mounting method?

The Monaco Pro permits base and side mounting, with the actual connection chosen to suit the proposed fitting route.

Are these seat options guaranteed to clear the coupe and sedan cabins?

Measure the exact seat version and trial the complete position with the occupant; cabin clearance depends on the shell, mountings and driving position.

Does choosing Daytona trim select the seat base?

The Daytona form has a separate required base choice, so include that supplied configuration with the side and trim.

What does the RRS pair supply?

It supplies two standard-base Corbeau Sportline RRS seats, with the vehicle frames, runners and remaining mounting parts specified separately.

Does four-point Clubman mean a crotch strap is supplied?

Do not infer a crotch strap from that name; TRS describes shoulder and lap straps for the four-point Clubman.

What information should I send before ordering?

Send the original model, body, year and market, steering arrangement, physical side, exact seat, intended use and photographs of the mountings and buckle.

Garreth's top tip

I would decide on adjustment and rear-seat access before choosing the shell. That matters particularly in the coupe, where a fixed position and a fixed back can change how useful the rear seats remain. Price the actual fitting assembly beside the seat so the order covers the whole job.

For a pair, write down one left and one right assembly. The RRS card is already two seats, while the brackets and runner kits are counted per position. Have the supplied codes and any base or upper-pattern choices on the quote.

Cameron's fitting view

I would identify the original mounting arrangement and seat equipment before working from a Civic generation label. The supplied part code needs to match that car. For an import, send the original market details with clear photographs of the floor fittings.

Then trial the seat with the occupant in place. Include the door trim, buckle, steering wheel, pedals and usable adjustment. The seat and lower bracket drawings need checking together before the assembly is fitted for use.

Plan your Honda Civic coupe and sedan 2006-2011 in the PCI FG application seat change

Drop us an email or open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.

Back to the Car Seat Selector guide.

Application references: PCI’s A1 application list and S1 application list; Planted’s left SB068, right SB068 and fitting FAQs. Honda’s 2006 US release and Si timeline identify the model context; they do not establish bracket fit. TRS’s four-point Clubman specification describes its restraint layout.

Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text