Can-Am Maverick X3 Two-Door Bucket Seat and Fitting Guide
Plan the seat, SB326 bracket and runner pattern for your Maverick X3
Planted lists SB326 for the Can-Am Maverick X3 two-door, with a 2017 onwards application. The bracket provides the vehicle connection for an aftermarket seat and its fittings. Keep the exact X3 version and model year with the enquiry. A seat change also needs the right runner pattern and enough room for the driver in the completed assembly.
Garreth would compare the seat support with the way you use and store the Maverick. Try entry and your normal driving position before choosing the trim. Cameron would record the physical side and the full SB326 reference beside the seat and runners. Both would keep the restraint arrangement on the same fitting plan.
At a glance
- Application: Can-Am Maverick X3 [2 Door], 2017 onwards as listed by Planted.
- Standard physical-left bracket: SB326DR; physical-right bracket: SB326PA.
- Planted also lists Alternate (Cobra/Scheel-Mann) pattern versions for each side.
- The shop has two side variants; confirm the supplied runner-pattern version separately.
- Choose the seat, runners and any side supports as one mounting assembly.
- Check cockpit and cage clearance with the actual driver and restraint arrangement.
Identify the two-door X3 and its current fittings
Start with the exact Maverick X3 version, model year and original market. The application reviewed here is Planted’s two-door listing. It should not be extended to a four-door vehicle or another Maverick model from the name alone. Keep the vehicle identification with the bracket reference throughout the quote.
Include photographs beneath the current seat and labels on any earlier conversion. Mention changes to the floor fittings or nearby cage structure. Those details matter when comparing the vehicle connection with the bracket. A previous seat installation does not identify every component that is beneath it.
State which physical side you want to change and who uses it. Include the steering position if the vehicle has been converted. Cameron would compare that information with the full supplied reference. The words driver and passenger need to be interpreted for the actual vehicle.
Use SB326 as the vehicle connection
Planted’s current left and right application pages name the Maverick X3 two-door from 2017 onwards. The bracket is the adapter between the vehicle and the upper seat components. The selected seat still needs compatible connections through its supports or runners. Ask for the complete assembly to be specified together.
Confirm the exact year, version and current lower fittings before ordering. Planted recommends trial fitting the bracket to the vehicle before assembling the seat outside it. Changes to the mounting area need checking at that stage. Retain the confirmed physical-side reference beside the seat selection.
The bracket listing does not establish the width or finished position of every seat. Choose the proposed seat version first, then check its complete mounting arrangement and cockpit clearance. Keep any required hardware on the quote. A frame, a pair of runners and a shell are separate components to reconcile.
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Select physical side and runner pattern separately
Planted names SB326DR as physical left and SB326PA as physical right. In the shop, those actual references appear under RHD Passenger Side and RHD Driver Side respectively. Use the full reference and physical position to reconcile the order. The catalogue’s RHD wording does not describe the steering position of every Maverick.
Planted offers Standard and Alternate (Cobra/Scheel-Mann) slider patterns on both physical sides. The two shop variations select side; they do not provide a separate pattern picker. Ask for the intended pattern version to be confirmed with the supplied package. Keep that choice beside the runner model.
The Standard pattern includes the Recaro slider pattern. The Alternate version replaces that pattern with the Cobra and Scheel-Mann slider pattern. Planted’s notes distinguish Cobra Narrow and Wide runners. Confirm the runner’s actual mounting pattern before choosing between the two bracket versions.
| Physical position | Standard maker reference | Alternate maker reference | Current shop side label |
|---|---|---|---|
| Left | SB326DR | COBRA-SB326DR | RHD Passenger Side, reference SB326DR |
| Right | SB326PA | COBRA-SB326PA | RHD Driver Side, reference SB326PA |
Compare fixed buckets with the intended driving position
The Cobra Monaco Pro, Sparco Sprint and OMP TRS-E are fixed-back seats to compare for the fitting enquiry. Try their support with the driver before committing to a shell or trim. Include entry and the movement you need while seated. Then check the chosen version in the actual Maverick cockpit.
The listings identify base and side mounting options for these seats. Specify which method is proposed for the exact seat version. A base-mounted arrangement needs the matching connection below the seat; a side-mounted arrangement also needs compatible side supports. Keep the seat instructions with that choice.
Measure the completed seat against the console, door area and nearby cage structure. Include any helmet or other equipment used in the driving position. The bracket’s brand list does not establish that a particular shell clears the cockpit. Confirm the complete installation before ordering its separate components.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £252.00 Incl. VATFrom £210.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £244.40 Incl. VATFrom £203.67 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Check recliner movement and control access
The Sparco R100, Corbeau Sportline RRS and Cobra Misano Anniversary provide reclining options to discuss. These are base-mounted seats with different shapes and controls. Compare the exact seat with the space available in your X3. The proposed backrest position needs to work with the restraint arrangement.
A recliner needs clearance for its adjustment controls and the backrest movement you intend to use. Check those points with the completed lower assembly in the vehicle. Try entry and exit with the actual driver. Garreth would settle the support and access questions before choosing the finish.
The linked Corbeau RRS listing is a pair of seats. Each position still needs its own confirmed bracket and any required runners. Record the physical side for each assembly. The size of the seat bundle does not specify the lower fittings supplied with it.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,649.00 Incl. VATFrom £1,374.17 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Choose the trim around actual exposure and care
Tell us how the Maverick is used and stored. Include the water or dust exposure you expect and how the seat will be cleaned afterwards. Choose the exact trim with its manufacturer’s care instructions. A vinyl finish or a bucket-seat shape does not by itself establish waterproof construction.
The Monaco Pro listing offers several trim choices, while the Sprint and TRS-E listings identify velour. Compare those actual options with your storage and cleaning plan. Ask about the specific finish you want before ordering. Do not assume an unspecified seat can be hosed down.
Keep the driver’s comfort check alongside the care requirement. Try the seat in the clothing and equipment normally used in the vehicle. Include the time you expect to spend seated and any other regular driver. Garreth would keep those details with the precise seat version on the enquiry.
Confirm the Cobra runner and bracket-pattern combination
The Cobra Premium runner listing offers 291mm and 405mm handle-type options. Those labels are a starting point for identifying the runner. Confirm its actual attachment pattern with the selected seat and bracket. Handle width alone does not check every connection in the assembly.
Planted’s instructions distinguish Cobra Narrow and Wide runner patterns. Its Narrow pattern is included on both bracket versions; the Wide pattern calls for the Alternate version or a separately specified modification. Ask for the supplied pattern to be agreed before ordering. Keep the full runner and bracket references together.
A runner adds fore-aft adjustment to the selected lower assembly. Confirm the adjustment travel and handle clearance in the actual cockpit. If two drivers use the vehicle, try the range each needs. The final position also depends on the seat and any other mounting components.
-
From £84.00 Incl. VATFrom £70.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Check the Sparco runner at both mounting interfaces
The Sparco runner kit is another adjustment component to discuss for a compatible seat assembly. Confirm its connection to the exact seat or side supports. Then check its lower connection against the selected SB326 pattern. Each interface needs to match.
Keep the runner handle and locking action accessible when trial fitting the completed assembly. The rails should operate together through the travel you intend to use. Check the seat against nearby trim and structure throughout that movement. Complete the trial with the actual driver before final fitting.
Ask for the runner quantity to be listed with the quote. A seat pair still needs the required components for each individual position. Confirm the seat’s mounting method and the hardware included. The runner’s product name does not identify the rest of the fitting package.
Specify side supports only for the chosen side-mounted arrangement
If the selected seat is being side mounted, include the appropriate supports in the assembly. The linked Sparco steel supports are a component to check for a suitable seat. Confirm their exact connection to that seat and the proposed runners. A brand name alone does not settle the dimensions or hardware.
Choose the support positions with the complete assembly in the Maverick. Check the resulting height and inclination with the driver. The support holes provide adjustment choices before final installation. Their photograph cannot establish the finished driving position.
A seat using its base-mount connection follows a different upper arrangement. Keep the chosen mounting method explicit on the quote. If the seat or support changes, revisit the remaining connections. Cameron would confirm the full component list before the final trial.
Trial the seat within the actual cockpit and cage
Check clearance around the seat shoulders and cushion as well as the lower fittings. Include the door or side panel arrangement on your particular vehicle. Any changed cage structure belongs in that assessment. The seat needs to clear the surrounding components in the intended position.
Sit in the complete assembly and check reach to the steering wheel and pedals. Include the headroom needed with the equipment you use. If runners are fitted, repeat the checks across the required travel. A seat that suits one driver may need a different position for another.
Confirm the restraint route while the driver is seated. Check access to the buckle or release with the normal driving equipment. Keep the actual seat and belt instructions with the installation plan. Clearance and restraint checks need the completed arrangement in the vehicle.
Check the vehicle connection before assembling the seat
Planted’s installation guidance starts by checking the components and trial fitting the vehicle bracket. Confirm the correct SB326 physical side and the actual lower connection. Show any changes or earlier repair work in the mounting area. Resolve that fit before completing the upper assembly.
Assemble the selected seat, runners and any supports using their current instructions. Keep the rails correctly orientated and parallel if they are part of the package. Check the hardware required at each connection. The vehicle-specific instructions should remain with the bracket and seat references.
Trial the complete assembly in the cockpit before final tightening. Check the driver’s position and the intended movement of the seat and controls. Include the restraint attachment and clearance checks. Cameron would finish the fitting only after the complete combination has been assessed.
Keep the restraint arrangement with the seat recommendation
Show the current belt or harness and its attachments with the fitting enquiry. Identify the exact restraint model if you intend to retain it. The chosen seat position and its belt openings need checking with that system. A bracket listing does not establish the complete restraint installation.
For a new harness proposal, provide the planned attachment points and intended use. Check the manufacturer’s requirements with the precise seat and installed position. The presence of harness slots does not select a suitable belt or anchorage. Keep those decisions on the same component list as the seat fittings.
Any buckle support or bracket tab needs checking against the actual attachment arrangement. Confirm the required hardware and the component instructions. Garreth and Cameron would keep the seat and restraint advice consistent throughout the enquiry. Ask for the complete combination to be confirmed before placing separate orders.
Identify any existing conversion before reusing parts
If an aftermarket seat is already fitted, record every reference you can find beneath it. Photograph the bracket, runners and any side supports. Mention any changes to the floor fittings or surrounding structure. Those details help establish which components can be considered for the new assembly.
Do not assume that an old slider has the pattern needed for the selected SB326 version. Confirm its actual dimensions and condition with the installer. The new seat may also use a different fixing method. Keep the proposed component list current when replacing an existing setup.
If the driver’s position is the reason for changing the seat, describe the present problem. Include reach and the clearance you need with your normal equipment. Trial the proposed assembly before deciding that removing a runner or changing supports will solve it. The completed position needs checking in the actual vehicle.
Send the details for an itemised X3 fitting quote
Send the exact Maverick X3 version and model year with its original market and physical seat position. Include photographs beneath the current seat and any mounting-area changes. Name the seat you want to compare. Add the intended restraint arrangement to the same enquiry.
Ask for the full physical-side SB326 reference and supplied runner pattern to be recorded. Include the actual runner model and any side supports. For a Cobra runner, confirm the mounting pattern separately from its handle-type label. The shop’s side selection leaves the pattern choice to check.
Tell us how the vehicle is used and stored, plus the equipment normally worn by the driver. Ask for the seat and complete lower assembly to be listed together. Keep the current fitting and care instructions with those references. That provides a specific combination for the installer to assess.
Common questions
It covers Planted’s Can-Am Maverick X3 [2 Door] application from 2017 onwards. Keep the exact version and model year with the enquiry. Another Maverick model needs its own fitting reference.
The reviewed manufacturer listing names the two-door X3. It does not establish a four-door application. Confirm a separately listed bracket for the actual vehicle.
It provides the vehicle connection for the aftermarket seat assembly. The chosen seat still needs compatible runners or supports where required. Confirm the full component list before ordering.
The Standard physical-left reference is SB326DR. Planted’s Alternate pattern reference is COBRA-SB326DR. Confirm the supplied pattern with the runner being used.
The Standard physical-right reference is SB326PA. Planted’s Alternate pattern reference is COBRA-SB326PA. Keep the actual physical position with the full order reference.
The actual SB326DR left variant appears under RHD Passenger Side, while SB326PA right appears under RHD Driver Side. Reconcile the order using the physical side and full reference. Those catalogue labels do not identify the steering position of every Maverick.
The two actual shop variations select side. Planted lists Standard and Alternate patterns separately for each physical side. Ask for the supplied pattern version to be confirmed on the quote.
Planted replaces the Recaro slider pattern with its Cobra and Scheel-Mann slider pattern. Keep that choice with the exact runner. Check the mounting dimensions at both interfaces.
Planted distinguishes Narrow and Wide Cobra patterns. Its Narrow pattern is included on both bracket versions; Wide calls for Alternate or a separately specified modification. Confirm the actual runner pattern before ordering.
Confirm the runner’s actual attachment dimensions with the seat and bracket. The handle-type label identifies an option in the shop. It does not check every connection in the complete assembly.
The Cobra Monaco Pro, Sparco Sprint and OMP TRS-E are comparison options for the fitting enquiry. Try the exact seat version with the driver. Confirm cockpit clearance and the complete mounting arrangement before ordering.
A suitable base-mounted recliner can be discussed as part of the fitting plan. The R100, RRS and Misano listings provide different options to compare. Check the exact seat’s movement, controls and restraint arrangement in the vehicle.
The linked listing is a pair of seats. Each physical position still needs its own confirmed bracket and any required runners. Have the complete lower components itemised separately.
Do not assume waterproof construction from a trim name. Choose the exact finish with its manufacturer’s care instructions and the exposure you expect. Ask about cleaning and storage before choosing the seat.
Seat dimensions and the completed mounting position still need checking. Planted’s slider brand list does not establish cockpit clearance for every shell. Trial the actual seat with the driver and surrounding structure.
That depends on the mounting method for the chosen seat version. A side-mounted arrangement needs compatible supports. A base-mounted arrangement uses its own lower connections instead.
Discuss that arrangement with the installer and the component instructions. The direct attachment pattern and driving position need their own check. Removing runners does not establish a suitable finished position by itself.
Trial the completed assembly in the actual vehicle. The seat, supports and any runners affect the final position. Check reach and headroom with the driver and normal equipment.
Identify the exact restraint and show its attachments. Check it with the new seat position and the manufacturer’s instructions. A seat bracket alone does not confirm that complete combination.
Include clear photographs and details of the alterations. Confirm the bracket connection and cockpit clearance against the actual structure. Have the complete proposed installation assessed before ordering the seat package.
Provide its reference, attachment dimensions and photographs. Check its condition and connection to the new seat and selected SB326 pattern. An existing installation does not identify compatibility with the replacement parts.
Send the exact vehicle and physical side with the proposed seat and restraint arrangement. Include the runner model, intended bracket pattern and any side supports. Add driver equipment, exposure and current lower-fitting photographs so the complete package can be checked.
Garreth’s top tip
Garreth would try the seat with the driver and normal equipment before choosing a trim. Compare the support with entry and the movement you need. Keep the actual exposure and cleaning plan beside the preferred seat version.
Cameron’s fitting view
Cameron would mark physical left or right beside the full SB326 reference, then confirm the supplied runner pattern. Keep the runner and seat-side connections explicit on the quote. Trial the complete assembly in the actual cockpit with the restraint arrangement.
Plan your Can-Am Maverick X3 two-door seat change
Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Sources: Planted’s physical-left and physical-right X3 applications, installation guidance, pattern notes and linked shop listings. Confirm the exact vehicle, supplied pattern and current component instructions with the fitting enquiry.

![Planted Technology Can-Am Maverick X3 [2 Door] (2017+) Seat Bracket](https://www.sportseats4u.co.uk/wp-content/uploads/sites/2/2026/08/SB326DR_PA-1-300x300.jpg)





