Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Toyota Tacoma 1995.5 to 2004 Bucket Seat and Fitting Guide

Match the original seat configuration and actual floor first

For a Tacoma seat change in Planted’s 1995.5 to 2004 range, the original front-seat configuration is the first question. The maker lists different brackets for models with a bench and models without one. Match that application to the actual mounting points before choosing the seat and upper fittings.

Garreth would begin with the support and access wanted from the new seat. Cameron would identify the original configuration, any previous conversion and the physical side. Send the build details and clear photographs of the floor mounts with the enquiry.

At a glance

  • SB208 is the named Planted application excluding bench-seat models; SB340 is the separate bench-seat-model application.
  • Both application labels cover 1995.5 to 2004; confirm the actual build, cab and floor details.
  • The manufacturer lists physical-left DR and physical-right PA references within each family.
  • A seat fitted during an earlier conversion does not establish which original mounting application the truck has.
  • Choose the exact seat, runner or fixed arrangement and any shell supports as one complete package.
  • The scaled Sparco drawing shows named seat-side centres, separate from the Tacoma floor pattern.

Identify the build, original seat configuration and actual mounts

Planted labels both of these Tacoma applications 1995.5 to 2004. Give the actual build and cab details with the enquiry. A registration year or a later seat conversion is only part of that information.

Photograph the original mounting locations and show any altered brackets, cross-members or earlier adaptation.

Include the complete front seating layout you want to retain or create. Tell us about any centre position and the controls or storage around the seats. Cameron would keep that layout with the floor photographs when checking the proposed parts.

Keep bench and separate-seat mounting applications distinct

The SB208 application expressly excludes bench-seat models. SB340 is listed for bench-seat models in the same year range. The two names identify different mounting applications, not trim choices for the same bracket.

Use the original configuration and actual floor details together when a truck has already been modified.

The references below show the maker’s physical-left and physical-right parts. Our shop options use RHD seating-side wording, so confirm the complete supplied variation code with us. Driving side and physical seating position need to agree in that selection.

Manufacturer application and physical-side references
Original applicationPhysical leftPhysical right
Excluding bench-seat modelsSB208DRSB208PA
Bench-seat modelsSB340DRSB340PA

Use the SB208 route for the named non-bench application

The listed SB208 covers the Tacoma application excluding bench-seat models. Its manufacturer references are SB208DR for physical left and SB208PA for physical right. Select the correct physical position with the actual vehicle details.

The bracket is the floor connection; the seat and upper fitting assembly are specified separately.

Confirm the original mount arrangement, retained hardware and buckle connection before completing the package. Include any earlier work that changes those connections. Garreth would choose the new seat around the driver and intended use, then settle its lower fittings.

Use SB340 for the named bench-seat-model application

Planted identifies SB340 as the separate Tacoma bench-seat-model application. The maker lists SB340DR on physical left and SB340PA on physical right. Check the exact supplied part against the truck’s floor and previous modifications.

A description of the seat currently installed cannot replace that mounting check.

If the enquiry changes the front seating layout, include the complete proposed arrangement. Confirm each position, buckle location and access to surrounding equipment. A floor-bracket listing alone does not establish the finished layout.

Choose the slider pattern after the application and physical side

The inspected Planted pages offer Standard and Alternate slider-pattern choices for these applications. Standard includes its Recaro slider interface; Alternate substitutes the wide Cobra and Scheel-Mann interface. The maker’s guidance also distinguishes narrow and wide Cobra runners.

Give us the actual runner code and both fixing interfaces, alongside the full SB208 or SB340 reference.

A handle-width label is not the complete lower hole layout. Confirm the supplied bracket version and the selected seat connection together. Cameron would establish those parts before the assembly is built.

Try fixed-back support with entry and driving reach in mind

The Cobra Monaco Pro is a steel-frame fixed-back choice with listed base and side mounting routes. Try its cushion and bolster access before choosing the lower assembly. The exact supplied seat version determines the fittings to specify.

The standard Sparco Sprint card carries the BRR0003 family reference, with base and side fixing arrangements shown in the maker catalogue.

The OMP TRS-E Velour is another steel-frame option to discuss, with base or side mounting listed. Include getting over the bolster and reaching the controls in the trial. Garreth would compare that access with the support wanted for the vehicle’s actual use.

Compare recliners with adjustment and control clearance

The Sparco R100 gives a base-mounted reclining route to discuss. Our listing uses the legacy 00961NR reference, while the newer catalogue uses the 009014 family. Confirm the supplied version before selecting lower fittings from a drawing.

The Corbeau Sportline RRS card is a pair of seats on the named standard base; each side still needs its own vehicle bracket and selected upper assembly.

The Cobra Misano Anniversary has its own shell, mechanism and trim choices. Try the cushion and access to the reclining control, then check the backrest movement required in the Tacoma. Include the controls or storage around the seat in that trial.

Choose the Cobra runner with the exact seat and bracket version

The Cobra Premium listing offers 291mm and 405mm handle-width options. Match the intended seat to the complete runner reference, then confirm the supplied SB208 or SB340 slider-pattern version. A handle label alone does not describe every lower fixing.

One runner assembly serves one seat position.

Check the useful adjustment with the driver seated and the release handle accessible. Add the runner’s thickness to the proposed seating-position measurements. Cameron would confirm the upper and lower connections before completing the order.

Include the Sparco slider in the height and fixing checks

The Sparco 0049306 runner is a separate sliding option for a matching upper assembly. The inspected catalogue shows a 271mm longitudinal fixing distance. Compare its full layout with the actual seat, any supports and the selected Planted bracket.

The named Sprint and R100-family lower seat fastenings discussed below are 345mm by 271mm.

Operate both rails through the travel the driver needs, with room for the release handle. Check locking and surrounding trim as part of that trial. The useful finished position comes from the complete assembly.

Connect a side-mounted shell through its specified supports

The Sparco steel supports shown here are a candidate for the selected Sparco shell and its instructions. Other shell families need their own confirmed support combination. The seat’s side fixing and the support’s lower connection are different interfaces.

Support angle and hole choice also contribute to the driving position.

Confirm the exact shell label, support reference and fasteners, then include the runner or fixed lower arrangement. Trial the complete position with the driver. A vehicle-bracket application does not establish the shell’s clearance beside the door and tunnel.

Specify fixed positioning as a complete alternative arrangement

Planted publishes separate installation arrangements for base-mounted and side-mounted seats, with and without sliders. Removing a runner changes the lower interface and finished height. Ask us to specify the complete fixed arrangement for the chosen shell.

Trial the vehicle bracket against the actual floor and follow the relevant component instructions when assembling the seat. Confirm reach and access before settling the final mounting position. Garreth would make that choice with the driver and the intended use in view.

Use the Sparco seat-side drawing for its named interface

The Sparco catalogue gives 345mm across and 271mm front to rear for the named Sprint and R100-family lower fastenings. Both dimensions below use the same scale. Match the exact supplied seat version before using them to choose components.

The Toyota floor pattern, full Planted slot layout, bracket height and outside shell measurements need their own references. Use the exact maker drawing for a Cobra, Corbeau or OMP selection.

Seat-side bolt centres 345 by 271 millimetres, drawn to scale345mm across271mm front to rearSeat-side bolt centres; outer frame outline is schematic

Source: Sparco 2025 catalogue, printed pages 178 and 326 to 327. These are named seat-side centres; use the actual Tacoma floor and supplied bracket drawing for the vehicle connection.

Plan the restraint at the intended seating position

Include the chosen belt arrangement while the seat and height are being specified. Match the shell and restraint instructions to the actual anchors and seated driver. A floor-bracket tab is one connection in that plan.

Send photographs of the existing buckle mount and any proposed harness bar or cage. We would check routing, access and the intended driver position together. Select a harness product after its configuration and attachments are confirmed.

  • Original belt: check the selected shell, retained buckle and actual mounting hardware.
  • Harness: confirm the shell openings, strap configuration and available anchors.
  • Two seats: specify each physical side, original mounting application, quantity and adjustment requirement.

Bring the mounting application and complete layout into one enquiry

Send the build and cab details, steering side and photographs of the current floor and original mounting locations. Include the complete seat, runner and support references. Tell us which seating positions, original functions and restraint arrangement need to remain.

We can then check the SB208 or SB340 application, physical side and supplied slider pattern as a complete order.

Measure the existing driving position if a height change is the aim. The cushion, shell angle and every lower fitting affect the result. Cameron would check the proposed assembly with the driver before confirming reach and clearance.

Common questions

Which bracket application is for a Tacoma without a bench?

Planted names SB208 for its 1995.5 to 2004 Tacoma application excluding bench-seat models. Match the actual build, original configuration and floor before selecting the supplied part.

Which bracket application is listed for bench-seat models?

SB340 is the separately named bench-seat-model application for the same range. Confirm the original mounting arrangement and any earlier conversion with photographs. Specify each physical seating position.

Can I choose by the seats currently in the truck?

Include the original configuration and the actual floor mounts as well. An earlier conversion may have changed the seats while retaining or altering different lower connections. Send photographs before treating the current upholstery as the application.

Which manufacturer reference is physical left or right?

The maker uses SB208DR and SB340DR for physical left, and SB208PA and SB340PA for physical right. Match the appropriate application first, then the actual steering side and current shop variation code.

Does a 1995 registration establish the bracket application?

Planted’s label starts at 1995.5. Confirm the build and original floor details instead of selecting on the registration year alone. Include the cab specification and any previous conversion.

Will these fit a later Tacoma or another Toyota pickup?

Those vehicles need their own exact application check. Give the model, build and current mounting details. A shared Toyota badge or similar-looking seat does not establish the same floor connection.

Are runners and side supports included?

Check the current order contents and specify the chosen upper assembly separately. The floor bracket, runner and shell supports perform different jobs. Confirm the parts and quantities needed for each position.

Can I fit a fixed seat without runners?

Planted provides separate fixed installation arrangements. Removing a runner changes the lower interface and final position. Ask us to specify the exact complete arrangement for the selected shell and vehicle bracket.

Can a centre seating position be retained?

Include the complete intended front layout with the enquiry. We need to check the original arrangement, proposed seats and available mounting connections together. These individual bracket applications do not establish a finished seating layout by themselves.

What does the 345mm by 271mm diagram show?

It shows the named Sparco seat-family lower fastening centres from the manufacturer catalogue. The Tacoma floor pattern and full SB208 or SB340 layout need their own references. Match the remaining fixing interfaces independently.

How much lower will the seat sit?

The selected shell, cushion angle, runner and lower fittings determine the finished position. Measure the existing position and trial the proposed complete assembly with the driver. A floor-bracket reference cannot predict the reduction.

What do you need for a complete recommendation?

Send the actual build and cab, original seat configuration, steering side, physical position and floor photographs. Include the full seat and fitting references, required adjustment and restraint arrangement. Tell us about any earlier adaptation.

Garreth’s top tip

Garreth would choose the new seat around the support, access and complete front layout wanted in the Tacoma. Try the intended trim and adjustment before the lower fittings are ordered. Keep the way the truck is used in that decision.

Cameron’s fitting view

Cameron would identify the original mounting application and actual floor, then match the physical side and supplied slider pattern to the exact upper fittings. Record any previous conversion with photographs. Check the final assembly with the driver before confirming reach and clearance.

Plan your Toyota Tacoma 1995.5 to 2004 seat change

Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.

Back to the Car Seat Selector guide.

Sources: Planted’s SB208 physical-left and physical-right applications; SB340 physical-left and physical-right applications; assembly-specific instructions; Sparco 2025 catalogue, printed pages 178 and 326 to 327; linked shop listings. Confirm the current supplied versions and actual truck before completing the package.

Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text