Infiniti G35 V35 Bucket Seat and Fitting Guide
Start with the physical side and the position you need
If you are choosing a seat for a G35, tell us the chassis code and body before choosing a bracket height. Our three Planted listings below relate to the V35 application. The physical left and right positions need different checks, particularly around the transmission tunnel.
Garreth would start with the seat shape and how you get into the car. Cameron would put the bracket, upper supports and sliding mechanism together around that choice. Give us the actual steering side and tell us whether you are changing one seat or a pair.
At a glance
- Use the V35 chassis and actual build details when checking the manufacturer’s 2003-2007 application.
- Planted’s LOW and TALL DR references identify the physical left; its PA references identify the physical right.
- The right-side tunnel hump affects both bracket position and available sliding travel.
- Choose the exact Standard or Alternate slider pattern with the complete seat assembly.
- A bracket-height difference does not predict your final seated height.
- Compare the maker’s seat dimensions, then trial access and clearance in the actual G35.
Identify the V35 and its actual seating side
Planted names the G35 V35 in its 2003-2007 application. Send us the body, build, original market and steering side with the exact seat model. Include photographs of the original floor connections if the car has been converted or its seating has already changed.
A later G35 or G37 needs the separate V36 application checked.
Use physical left and right when discussing the parts with Cameron. Planted calls the left-side parts Driver and the right-side parts Passenger in this application. Those names do not identify the driver’s position in every market or conversion.
Choose the Planted reference for the physical side
The LOW left-side bracket is SB075DR and the TALL left-side bracket is SB075.1DR. Our third listing uses SB075PA, the standard physical right-side reference. Put the complete reference on the quote with the actual car and seat.
Garreth would try the seat before deciding which position feels right. Cameron would check the intended bracket height with the complete cushion, supports and adjustment mechanism. For a pair, specify each physical side separately.
Compare the two left-side bracket positions
Planted describes the LOW version as sitting close to the floor without modifying it. The TALL version is about one inch higher. That is a comparison between its brackets, so measure the finished seat position with the actual upper hardware.
Keep the original driving position as your reference.
Trial pedal reach and wheel access with the intended driver in the car. Include the cushion and backrest setting in that trial. Cameron would check the useful adjustment range before the assembly is finalised.
Allow for the right-side transmission-tunnel hump
Planted’s standard right-side bracket positions the seat above the tunnel hump. The maker describes it as about 2.5 inches above the LOW left bracket, or 1.5 inches above the TALL left bracket. Use those as approximate bracket comparisons when discussing the pair.
The manufacturer also lists a LOW right-side version, SB075LOWPA. That sits behind and below the hump, at about the TALL left bracket’s height. Its rearward position can restrict forward sliding because the seat meets the hump.
Our three shop listings here do not establish availability of that separate LOW right version.
Send Cameron the actual right-side floor photographs and the adjustment you need. We would check the exact supplied reference and how the chosen seat moves over the tunnel. Retain enough travel for the people who will use that position.
Match the slider bolt-pattern version
Planted offers Standard and Alternate bolt-pattern versions. Its Standard pattern includes the Recaro slider connection, while Alternate provides the Cobra and Scheel-Mann pattern instead. Confirm the exact runner and bracket version together.
The maker distinguishes Cobra’s narrow and wide runners. A wide Cobra runner needs its specified Alternate connection or the maker’s described modification to Standard. Do not order from the seat brand alone.
Garreth would put the seat and complete mounting package on one quotation. Cameron would then check both the seat-side connection and the bracket-side connection with the actual runner. Include the control position and locking action in that check.
Include the exact Sparco runner in the quotation
Our Sparco runner listing below is an adjustment option to check with the chosen seat. Identify its full reference and the version of the Planted bracket. The slider must connect to both components in the completed assembly.
Check the handle position and usable locking range during the position trial. Include any upper supports needed by the seat. Cameron would check the actual fixing pattern before you order the separate parts.
Specify the Cobra runner width and lower connection
If you choose a Cobra seat, include the exact Cobra runner in the enquiry. Planted’s narrow and wide runner distinction changes the required lower pattern. Ask us to confirm the supplied runner version against its current instructions.
The premium runner listing below needs that same complete-package check.
Trial access to the adjustment control with the seat in place. Check the lock through the travel you intend to use. Garreth would settle how the seat feels in that position before choosing its finish.
-
From £84.00 Incl. VATFrom £70.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Choose the fixed seat around support and access
The Sparco Sprint, Cobra Monaco Pro and BRIDE ZETA IV give you three fixed seats to discuss. Try the cushion and bolsters with the way you get into the G35 in mind. Match the exact seat version to its intended upper supports or base connection.
Garreth would spend time getting in and out before deciding on a shell. Cameron would trial the complete seat width, shoulder area and backrest against the door and tunnel. Check both seating positions individually if you are changing a pair.
-
From £252.00 Incl. VATFrom £210.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,211.39 Incl. VATFrom £1,009.49 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Match upper supports to the chosen shell
A side-mounted shell needs supports that match the seat’s mounting points and the lower adjustment mechanism. Confirm their full references together. Work from the selected seat and support instructions when specifying the fixings.
The Sparco steel side-mount listing below is an option to check for that exact package.
Do the shell and lower-hardware trial before finalising the seated position. Include the supports in every height and clearance measurement. A matching brand name alone cannot confirm the complete connection.
Compare the reclining-seat shapes
The Sparco R100, Cobra Daytona and BRIDE EUROSTER II CRUZ offer three reclining-seat shapes to try. Set each backrest in a useful driving position when comparing support. Include the recline control and the movement you need beside the door or tunnel.
Garreth would choose from cushion comfort and entry, then settle the trim. Cameron would check the exact bottom connection and runner with the intended bracket version. Leave room to trial the backrest through the range you plan to use.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £599.00 Incl. VATFrom £499.17 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,265.47 Incl. VATFrom £1,054.56 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Compare the ZETA IV maker dimensions
BRIDE publishes 560mm outer shoulder width, 460mm lower front width, 890mm overall height and 710mm side-view length for this ZETA IV drawing. Compare those separate measurements with a seat you have tried. They describe the seat’s outer size.
Use the exact shell version and the completed lower hardware for a clearance trial.
Cameron would measure the shoulder area and lower bolsters against the G35’s door and tunnel. Check access as well as the final seated position. Outer width does not identify the space available for your hips or establish cabin clearance.
Trial the position with the actual user
Set the trial assembly with the footwear and driving posture you normally use. Check full pedal movement and wheel reach in the driver’s position. For the other seat, check leg room and the adjustment needed by its users.
Close the door while checking the bolsters and shoulder area.
Move the seat through the sliding range without forcing it against the tunnel or trim. Repeat the access check at the intended bracket height. Garreth would settle those practical points before adding a second seat to the order.
Choose the belt with the exact seat and installation
Include the belt you intend to retain or fit in the seat enquiry. Match it to the exact seat’s instructions and check the actual anchorage arrangement. A fitting bracket alone does not establish a harness installation.
Keep the buckle and belt path in the complete position trial.
If you want a competition harness, send Cameron its full reference and the intended anchorages. Follow the seat and belt manufacturers’ instructions for that combination. Check adjustment and routing from the seated position before the installation is put into use.
Lay out the complete assembly before fitting
Identify the physical side, full bracket code and Standard or Alternate version first. Lay out the selected seat, supports and runner against their current instructions. Confirm the supplied fixings and any parts retained from the original seating arrangement.
Trial the completed package before finalising its position.
Use the component manufacturers’ assembly procedure and fixing specification. Check adjustment and locking after the assembly is secured. Send us photographs if a reference or connection is unclear, so we can confirm the intended combination with you.
Common questions
Which G35 does this guide start with?
The Planted V35 application names 2003-2007. Send the actual chassis, body, build and original market with the seat enquiry. A later V36 needs its separate application checked.
What do DR and PA mean on these brackets?
Planted identifies these DR references as physical left and the PA references as physical right. Check the actual steering side before calling either one the driver or passenger position. Put the full maker code on the quote.
How do the LOW and TALL left brackets compare?
The maker describes TALL as about one inch above LOW. Include the seat cushion and all upper hardware when measuring the completed position. The bracket comparison does not give a guaranteed change from the original seat.
Why does the right-side position need its own check?
The transmission-tunnel hump affects the bracket and seat position. The standard right-side bracket clears the hump at a different height from the left-side options. Trial the complete assembly with the intended user.
Is there a LOW right-side bracket?
Planted lists SB075LOWPA separately. Its position behind the hump can restrict forward sliding, and our three shop cards do not establish supply of that version. Ask us to confirm the exact part and the travel you need.
Is the SB075PA shop listing only for a six-speed car?
Our shop title names the six-speed car, while the maker identifies the current SB075PA as its standard right-side V35 reference. Give us the actual car and full part number so the supplied application can be checked. The title alone cannot settle every car configuration.
Will the two seats finish at the same height?
Measure each completed seat and lower assembly. The floor and bracket positions differ, and the cushion and upper supports also affect the result. Quote the required position for each side separately.
Which slider pattern do I need?
Match the exact runner to Planted’s Standard or Alternate version. The maker distinguishes Recaro, Cobra wide and Cobra narrow connections. Ask Cameron to confirm both interfaces with the selected seat.
Can I fit a fixed bucket seat?
Specify the exact shell and its intended upper supports or base connection. Confirm those parts with the bracket and any runner. Trial the complete assembly in the car before finalising the position.
Do the ZETA IV widths show occupant space?
The drawing gives outer seat dimensions. The space available for your hips and the clearance in the G35 need separate checks. Try the exact shell before choosing it.
Can I retain the original belt?
Check the exact seat’s instructions, buckle position and belt path with the installed assembly. Include the car’s actual restraint arrangement in the enquiry. A harness needs its own seat and anchorage checks.
What should I send for a complete recommendation?
Send the chassis, body, build and steering side with photographs of the current fittings. Add the exact seat model, the physical side and the sliding adjustment you need. Garreth and Cameron can then work through the complete package with you.
Garreth’s top tip
Garreth would start by trying the cushion and bolsters, then spend time getting in and out at the intended height. Set the seat around how you use the G35. Choose the finish once the complete position and access checks are settled.
Cameron’s fitting view
Cameron would write the physical side and full Planted reference on the quotation first. The upper connection, runner pattern and tunnel clearance belong in that same check. Send the actual car details and photographs so we can work through the complete assembly with you.
Plan your Infiniti G35 V35 seat change
Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Manufacturer references: Planted application guide, LOW left-side G35 bracket, TALL left-side bracket, standard right-side bracket and installation instructions; BRIDE ZETA IV dimension drawing.






