Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Top 5 reclining seat choices for your Ford Escort Mk7, including our fitting guide

The later European Escort has three named fitting listings to compare here. Cobra calls its frame Mk7, while the Corbeau listing uses Mk5 (GAL) from January 1995. The RECARO listing starts in February 1995.

Send the actual build, body and steering details with the seat enquiry.

A familiar Mk number is not enough to choose the lower assembly. Identify whether the car is a hatchback, saloon, estate or Cabriolet. Include any earlier seat conversion and the original restraint equipment. The Escort RS Cosworth has its own fitting guide and needs identifying separately.

  • Cobra SU-FO-ES: required seating-side choice, including a pair option.
  • Corbeau FORDESCORTMK51995: required side and Slide/Tilting mechanism choices.
  • RECARO 866016: required RHD side; complete-kit supply needs confirming.
  • RECARO application notes limit two-door installations and particular Cabriolet seat choices.
  • Match the exact seat base and lower assembly before selecting trim or extra runners.
  • Assess rear access, original restraints and any harness or cage together.
Ford Escort Mk7 cornering on a British race circuit, helmeted driver visible at the wheel
The Escort Mk7 on circuit. Confirm the actual build, body and complete seat-fitting assembly with your enquiry.

Compare the three named fitting routes

Start with the chosen seat brand and its complete permitted mounting assembly. The three listings use different order choices. None establishes that every seat in this article shares one frame.

Use physical right or left with the actual steering arrangement when confirming the order.

Cobra: specify the Mk7 frame and selected seat base

The Cobra Mk7 frame is shop reference SU-FO-ES. Its required Sport Seat Position choices are Drivers Side, Passenger Side and Drivers & Passenger Side (Pair). Choose the pair option once when that is the quoted two-position assembly.

The shop describes sliding runners with this direct-fit frame. Have the actual contents confirmed with the selected Cobra seat base. Cobra offers several seat-base options, so a shared brand name does not establish every combination.

Cobra’s current mounting guide describes base-mounted seats and separate side-mounted systems. Its current subframe reference sheet does not identify an Escort FRM number. Ask for the actual supplied drawings and full reference for this older application.

Corbeau: choose the side and mechanism

The Corbeau listing is FORDESCORTMK51995, labelled Mk5 (GAL) from January 1995. Select its required Drivers Side or Passenger Side choice. The separate required mechanism choice offers Slide subframe or Tilting subframe.

One frame is listed per seat position; specify two complete assemblies for two seats.

Corbeau’s general subframe guidance covers its base-mounted recliners and classic seats, with double-locking runners. It excludes side-mounted shells. Confirm the actual supplied vehicle code and complete mechanism against the car.

RECARO: match the actual body and seat document

The RECARO shop frame is 866016, with a required RHD – Drivers Side or RHD – Passengers Side selection. Its application documents identify the later Escort family with 86.60.16/-26 from February 1995. Match the actual body/type and supplied assembly to the chosen seat document.

At the November 2026 check, this frame listing was out of stock. Confirm current supply of the complete kit before ordering seats around this route. The shortened shop code does not itemise the runners, adaptors or full handed references.

The earlier 68.02.09/-09 Escort application is a separate document row. Do not transfer a fitting plan using only the Escort name. The Mk4 AB-FO-ES4 adaptation-bar listing also needs its own original lower arrangement and is separate from this later-car guide.

Classic fixed-back seats with the Corbeau route

Corbeau GT4, GT8 and Classic are base-mounted fixed-back seats to compare with the Corbeau kit. They are supplied without the vehicle fitting assembly. Confirm the exact supplied seat and both fixing interfaces.

The Classic listing offers Standard or Excel width and headrest choices. GT4 and GT8 have their own trim and eyelet options. Choose the actual version with the driver before finalising its mounting position.

These Road and Track listings do not provide FIA competition-seat homologation. A side-mounted shell needs its own permitted side supports and vehicle connection. The Corbeau frame above excludes that route.

Corbeau PSR: a two-seat order

The PSR listing shown here supplies two Corbeau recliners. Budget for the appropriate complete vehicle assembly at each position.

The shop lists 291 x 330 mm and 345 x 271 mm base references. Those are different patterns, not a statement that the seats bolt to every Cobra frame. Have the actual Corbeau assembly and supplied seat version matched.

Compare the cushion and backrest with the regular driver. A pair price or a size category does not establish comfort and clearance in the actual Escort. Include any required heating or lumbar equipment in the quotation.

Cobra Daytona: confirm the base and side

Daytona is a base-mounted Cobra recliner with an integrated headrest and harness opening. Its shop order has trim, optional-equipment and RHD seat-position selections. Confirm the actual side with the vehicle frame.

Sport Seat – Base Options is a required order choice. Standard base is one listed option; the other base names describe different configurations. Have the selected base matched to the SU-FO-ES assembly before ordering.

Trial backrest controls, buckle access and useful sliding travel with that combination.

Cobra Le Mans: include the forward-access trial

Cobra describes the Le Mans with a reclining backrest and forward-tip facility. The shop order has RHD seating-position and trim choices. State which physical position is changing.

The required base selection includes Standard base and several named alternatives. Confirm the selected base and fitting assembly together. A choice of trim or heating does not resolve that mechanical selection.

Try the forward release and rear entry route in the actual car before relying on it for passengers.

Cobra Stuttgart Signature: specify the actual build

The Stuttgart Signature listing offers different trim and eyelet choices. Its required base and optional-equipment selections also need completing. Confirm the chosen base with the exact vehicle fitting assembly.

Cobra describes Stuttgart as a classic recliner with restrained bolstering. Compare its cushion and support with the driver. Do not assume that a more expensive trim guarantees more support or cabin room.

Ask for the current lead time for the actual build specification.

Corbeau RRS: two seats with two fitting assemblies

The RRS listing shown here supplies two standard-base Corbeau seats. Specify a complete position-correct Corbeau vehicle assembly for each seat.

Its listed base patterns need matching to the supplied fitting kit. They do not establish a direct cross-brand installation on the Cobra frame. Use the precise seat and frame drawings when confirming the order.

Trial the reclining and forward movement with the installed slider or tilting assembly. Include the rear access you intend to retain.

Runners, restraints and the installation trial

Itemise the console, sliding mechanism, adaptors, fixings and any specified spacers in the quotation. Confirm which parts are supplied together before adding extra universal runners. The complete assembly determines the installed position.

Cobra’s shop frame description includes runners, while Corbeau’s general kit guidance includes double-locking runners. The RECARO package needs its own supplied-content confirmation. Keep each route with the intended seat and mechanism.

Inspect the actual mounting area, including repairs and previous conversions. Follow the supplied instructions for orientation, hardware and tightening. Trial pedal reach, steering reach, head clearance and the useful adjustment range.

Belts, harnesses and any cage proposal

Have the original belt, buckle, pretensioner and seat-related equipment assessed with the replacement assembly. Check the belt path with the driver seated. A matching seat-base pattern does not approve the restraint installation.

TRS Clubman three-point bolt-in and four-point clip-in are Road and Track harness options for a separate assessment. Follow the exact seat and restraint instructions for routing and attachments. The product cards do not establish suitable Escort anchors.

Include any cage or harness-bar proposal in the same driving-position trial. Confirm the actual design and intended use before specifying the restraints.

Manufacturer references: Cobra mounting guidance, Corbeau subframe guidance, RECARO seat-specific application documents. Match the actual supplied assembly and seat version to the car.

RECARO seat-family conditions and fitting comparison

RECARO’s current Modular and AM190 documents name the later Escort family. The applicable rows and seat identities must match the car. These conditions are specific to the RECARO route.

Note 1 permits replacing only one seat in two-door vehicles, driver or passenger. Note A excludes cars with an original seat side airbag from these rows. Have the actual body and restraint equipment identified before specifying the conversion.

For the Cabriolet, Modular note 62b excludes Speed and Cross Speed. The Speed card below is therefore a choice to discuss for a permitted non-Cabriolet application. It is not a Cabriolet recommendation.

The AM190 row is for Sportster versions without an integrated side airbag. Note 67a excludes SAB and Cross SAB. Match the exact production identity and document conditions with the supplier.

Compare the actual fitting order and its conditions
RouteReference or conditionOrder choiceConfirm before ordering
Cobra frameSU-FO-ESSingle side or pair optionActual seat base and supplied runners
Corbeau frameFORDESCORTMK51995Side plus Slide/TiltingOne assembly per position;no side shells
RECARO frame866016 /86.60.16 familyRequired RHD sideSupply and exact seat/body documents
RECARO two-door note1One replacement seatDriver or passengerNot an automatic two-seat conversion
RECARO noteAOriginal seat side airbag excludedActual original equipmentNo generic side-airbag workaround
RECARO Cabriolet note62bSpeed/CrossSpeed excludedModular family conditionDo not transfer the ordinary-body selection
RECARO AM190 note67aSAB/CrossSAB excludedNon-integrated-airbag seat versionsExact supplied production identity
Cobra seat-base ordersRequired Standard/named base choiceDaytona,LeMans,StuttgartSelected base with actual vehicle assembly
Corbeau PSR/RRS pairsTwo seats in each shown listingTwo lower assembliesBrand/interface/quantity confirmation

Common questions

Which Escort does this article cover?

The later European Escort family discussed under the Mk7 name; the current Corbeau listing uses Mk5 (GAL) from January 1995 and the RECARO listing starts in February 1995, so identify the actual build and body.

Does the Mk number prove that two listings fit the same floor?

Match the actual vehicle/type, full supplied reference and installation instructions; the nickname alone does not establish the mounting arrangement.

Is the Escort RS Cosworth included in these recommendations?

The RS Cosworth has its own fitting guide and application; do not transfer this later-car fitting plan to it.

How many fitting brands are covered here?

Three named listings: Cobra SU-FO-ES, Corbeau FORDESCORTMK51995 and RECARO 866016.

Which Cobra frame options are required?

Choose Sport Seat Position: Drivers Side, Passenger Side or Drivers & Passenger Side (Pair), then confirm the actual steering arrangement and physical positions.

Should I order two Cobra pair options for two seats?

No; the pair option is the quoted two-position selection, while a single-side selection identifies one position. Confirm the complete contents before ordering.

Which Corbeau frame options are required?

Choose Drivers Side or Passenger Side, then Slide subframe or Tilting subframe; the listing is per seat position.

Will a Tilting subframe automatically preserve rear access?

Trial the complete seat and mechanism in the actual car, including useful slider travel and backrest movement.

Can the Corbeau frame be used for a side-mounted shell?

The shop and Corbeau guidance exclude side-mounted seats from this kit route.

Do all seats on this page use one Cobra frame?

Choose the intended brand and complete permitted assembly, then confirm the actual seat base and both interfaces; similar pattern numbers do not establish universal compatibility.

Are 291 x 330 mm and 345 x 271 mm interchangeable?

No; identify the actual mating interfaces and supplied drawings for the selected seat and kit.

Which seat-base choice should I discuss for the Cobra recliners?

The current orders include a required base selection with Standard base and named alternatives; have the intended base matched to the exact SU-FO-ES assembly.

Do the PSR and RRS cards supply one seat?

Those particular listings supply two seats; specify the appropriate complete lower assembly for each position.

Does the RECARO frame show immediate availability?

It was out of stock at the November 2026 check; confirm current complete-kit supply before ordering seats around that route.

Which RECARO adapter family names the later Escort?

The reviewed seat application rows identify 86.60.16/-26 from February 1995; match the actual body/type and all conditions to the supplied seat and kit.

Can the earlier 68.02.09 reference be assumed equivalent?

No; it is a separate Escort application row, so identify the actual supplied assembly instead of using the shared model name.

Can I replace both seats through the reviewed RECARO route in a two-door car?

The applicable note 1 allows only one replacement seat, driver or passenger, in two-door vehicles; have the actual body classification checked.

Do those RECARO rows cover an original seat side airbag?

Note A excludes vehicles with an original seat side airbag from the reviewed rows; have the actual equipment identified with the installer.

Is RECARO Speed a Cabriolet recommendation here?

No; Modular note 62b excludes Speed and Cross Speed for the Cabriolet application.

Can a Sportster CS SAB use the reviewed AM190 row?

No; that row is for versions without an integrated side airbag, and note 67a excludes SAB and Cross SAB.

Should I add universal runners to every fitting-kit order?

Confirm the actual kit contents and permitted assembly first; the named routes have different supplied mechanisms and interfaces.

Does a classic fixed-back seat have FIA competition approval?

The classic Corbeau listings here state Road and Track use, not FIA competition-seat homologation; match the actual seat and intended use.

Do the harness cards prove that the original anchors are suitable?

No; assess the actual attachments, routing and installed position against the exact seat and restraint instructions.

Is the Mk4 adaptation-bar kit the same later-Escort route?

No; AB-FO-ES4 is a separate Mk4 listing which depends on the original lower mounting arrangement and needs its own assessment.

Your fitting enquiry with Garreth and Cameron

Send Garreth the actual Escort build, body, steering arrangement and exact seat model. Include the physical position and parts already owned. List any rear-seat access that must remain usable.

Cameron can assess the proposed mounting assembly with those details. Ask for the supplied contents and references to be itemised. Include the original restraint equipment and any cage proposal.

Garreth's top tip

Compare the actual seat before choosing its trim. Bring the driver’s requirements and the car details. A useful sitting trial settles more than a catalogue size label.

Cameron's fitting view

Choose the complete lower system with the seat. Check every interface and the operating clearances. Include rear access and the restraint path in the trial.

For a complete seat and fitting-kit recommendation, call 0115 647 8650 or use our contact page.

Back to the Car Seat Selector guide.

Got a question about the equipment we sell?

Ask us anything. If it helps other drivers, we’ll turn your question into a full blog guide and share the answer on our site.

Why Choose Garreth And Cameron At GSM Performance?

We listen to every customer, continually refine the advice we give based on real feedback, and only supply parts we trust to deliver the results you need.
Our showroom virtual walk through!
Have a walk around our showroom before you even buy your new seats. 
Our hands on experience, is what allows us to bring you our recommendations.

Need a personal recommendation?

We're here to ensure you pick the right seat. Contact us today.
Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text