The Sabelt Steel Caterham/Kit Car 4 Point Harness, part number 118S433SD4F, is a bolt-in 4-point competition harness approved to FIA 8854-1998. Shoulder and lap webbing are 3 inch. Aircraft-type buckle. Not HANS compatible. Available in black, blue and red.
Designed for Caterham and kit car chassis mounting geometry. These cars have specific rear anchor positions that differ from a standard saloon; a harness rated for Caterham/kit car application is configured around those points.
The 3-inch webbing is the distinguishing specification compared to the standard Caterham 4-point (185531), which uses 2-inch webbing. Wider webbing spreads load over a greater contact area on the shoulder in an impact. The bolt-in installation in this version anchors to fixed rear chassis points rather than clipping around a bar, giving a more consistent strap angle once installed.
FIA 8854-1998 is the 4-point standard. Check your class regulations: some Caterham championships now require 6-point under FIA 8853-2016. Not HANS compatible.
The Steel series designation places this in the entry tier of the Sabelt competition harness range. At £182 it sits above the 2-inch Caterham 4-point (185531, £95). If you want a 6-point for the car, the Steel Race/Rally 3×3 (CFCI1335S633S, £205) is the next step, though not Caterham-specific in its geometry.










