Call Garreth, Cameron & CallyAI: 0115 9893488

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Useful Links
Your Account

Talk to us

Garreth, Cameron & CallyAI · Mon to Fri
Call 0115 989 3488Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, CallyAI
Today On: 0115 9893488
Click Here For Our Contact Form

 

 

Vauxhall Corsa B bucket seat guide

1993 to 2000

Two fitting frames are confirmed for the Corsa B, one from Sparco and one from Corbeau, and this is one of the better-served cars in the catalogue for roll cages, with Sparco, OMP, Custom Cages and Safety Devices all making kits specifically for this shell.

The Corbeau frame is locked to Corbeau seats. The Sparco frame works more broadly across the rest of this page.

Green Vauxhall Corsa B on a British race circuit at an apex with red and white kerbing
Vauxhall Corsa B on a trackday

Two fitting frames

Sparco confirm a direct fit subframe for the Corsa B at £102.60. Corbeau make their own at £245, locked to Corbeau seats. Both bolt to the factory floor mounting points. Most bucket seats on this page are side mount, so a set of side mounts on top of either frame is the usual route.

The fitting kit

Pick the Corbeau frame only if you are running a Corbeau seat.

FIA competition bucket seats

The Cobra Monaco Pro at £282.00 and the OMP TRS-X at £264.00 are the cheapest FIA shells. The Auto Style Type BS6 and BS8 sit around £288.00 to £250. The OMP Champ-R at £381.60 the Mirco RS2 3D at £425.40 and the Sparco Evo QRT at £570.00 sit further up. The Sabelt GT3 at £517.20 and the Corbeau Sprint X System 3 Vinyl at £828.00 sit toward the top.

Reclining sport seats

The Sparco R100 Martini Racing at £349.99 sits on the 345mm x 271mm bolt pattern, matching the Sparco runner above. The Auto Style Type RS6-II Vinyl at £333.60 is the alternative single-seat option.

💬
Our recommendationChoose the frame that matches your seat

The Corbeau frame only works with a Corbeau seat, so decide the brand first. Cameron works out the fit and the best combination for a given car, so tell him your build and he will narrow the list.

Harnesses

There is no harness made specifically for the Corsa B, so you are fitting a universal belt and working out the mounting yourself. The standard rear seat belt mounts are not rated for harness shoulder strap loads, so one of the cages below, a bolt-in harness bar, or a fabricated anchor point is needed.

The Schroth Profi 3×2 at £370 and the TRS Magnum 6 Point Superlite at £245 are both FIA 8853-2016. The TRS Magnum 4 Point at £139 is FIA 8854-1998. All three carry a stamped expiry date regardless of wear. For a road or trackday car, the Takata Drift II and III and the TRS Clubman belts cost less, though none of those four are HANS compatible.

💬
Our recommendationConfirm the anchor before the belt

Tell us whether the car is caged, what is behind the seats now, and whether a head restraint is going in, and we will tell you what the shoulder straps can anchor to before you spend anything on the belt.

Roll cages

Sparco list a 6 Point Bolt In cage at £884.47. OMP offer a Bolt In Roll Cage at £921.60. Custom Cages build both a CDS and a T45 kit specifically for the Corsa B, at £1,311.00 and £1,818.30, alongside a newer International CDS and T45 pairing at £1395 each.

If competing, check the specification against your class regulations before ordering, and keep the sign-off paperwork with the logbook. Pad any tube within reach of a helmet, and tell your insurer, because a cage is a notifiable modification.

What fits what

All seats below fit the Corsa B on either frame, with side mounts added where the mounting column says side mount. Where a cell says not listed, the manufacturer has not published that figure.

SeatMountingApprovalDriver heightWaistHANS
Competition bucket seats
Cobra Monaco ProBase or side mountFIA 8855-1999Under 6ft32" to 36"HANS friendly
OMP TRS-XBase or side mountFIA 8855-1999Over and under 6ft28" to 36"HANS friendly
OMP Champ-RSide mountFIA 8855-1999Under 6ft32" to 36"HANS friendly
Sabelt GT3Side mountFIA 8855-1999All heights32" to 36"HANS friendly
Mirco RS2 3DSide mountFIA 8855-1999All heights32" to 36"HANS friendly
Sparco Evo QRTSide mountFIA 8855-1999Not listedNot listedNot listed
Reclining sport seats
Sparco R100 Martini RacingBase mount, 345mm x 271mmRoad and trackAll heights32" to 36"Not listed

Common questions

The Sparco direct fit subframe at £85.50 is the general option. Corbeau make one at £245, but it only works with Corbeau seats.

It depends on budget and use. Sparco and OMP options start around £737 to £768.00. Custom Cages offer a fuller CDS at £1,092.50 and a T45 at £1,515.25 for a more serious build.

No. They are titled and built for different generations. Check the listing matches your car before ordering.

For FIA competition, the Schroth Profi 3×2 at £370 and the TRS Magnum 6 Point Superlite at £245 both meet 8853-2016, and the TRS Magnum 4 Point at £139 meets 8854-1998. For road and trackday use, the Takata Drift II and III and the TRS Clubman belts cost less but are not HANS compatible.

No. They are not rated for the loads a harness shoulder strap puts through them in an impact. One of the cages above, a bolt-in harness bar, or a fabricated anchor point is needed instead.

More help

If you want the frame confirmed against your seat, or a cage checked against your class regulations, the contact link is the quickest way to get it looked at.

Need a personal recommendation?

We're here to ensure you pick the right seat. Contact us today.
Our showroom virtual walk through!
Have a walk around our showroom before you even buy your new seats. 
Our hands on experience, is what allows us to bring you our recommendations.
Free UK Shipping

On all orders above £100

In-Store Shopping

Try before you buy

Easy Delivery Tracking

Aftership Tracking Updates