Call Garreth, Cameron & CallyAI: 0115 9893488

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Useful Links
Your Account

Talk to us

Garreth, Cameron & CallyAI · Mon to Fri
Call 0115 989 3488Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, CallyAI
Today On: 0115 9893488
Click Here For Our Contact Form

 

 

Triumph TR6 bucket seat guide

1969 to 1976

Planted Technology confirm a bracket for the TR6, 1969 to 1976, base mount. The seat range for a car this age splits two ways: period-correct Cobra Cub buckets that suit the character of the car, and the Corbeau Sportsman, a genuinely classic-style reclining seat that belongs on cars exactly like this one.

Custom Cages build cages specifically for the TR6, and Safety Devices cover the TR6 alongside its TR4, TR4A and TR5 siblings on shared underpinnings, so this is a well-served car for a proper roll cage.

British Racing Green Triumph TR6 on a British race circuit at an apex with red and white kerbing
Triumph TR6 on a trackday

The fitting bracket

Planted Technology confirm a bracket for the TR6, 1969 to 1976, at £222.60 per seat, base mount. It bolts to the factory floor mounting points. Every seat on this page is base mount, so no side mounts are needed once the bracket is in.

The fitting kit

The bracket is priced per seat, so two front seats means two orders.

Bucket and reclining seats

The Cobra Cub is available with a headrest at £349.00 or without at £279.00, a period-flavoured fixed-back bucket that suits the car’s character. The Triumph TR6 Cobra Roadster 7 Narrow Fit at £569.00 is built specifically for this car, which is worth knowing if cabin width is tight.

The Corbeau Sportsman at £468.00 is a genuinely classic-style reclining seat, and this is exactly the kind of car it belongs on rather than a modern hot hatch. It is base mount and fixes straight to the Planted bracket.

💬
Our recommendationMatch the seat to how the car is used

A period-flavoured Cobra Cub suits a TR6 kept close to original spec. The Corbeau Sportsman suits a car doing longer road trips where the recline matters. Cameron works out the fit and the best combination for a given car, so tell him how the TR6 is used and he will point you at the right one.

Harnesses

There is no harness made specifically for the TR6, so you are fitting a universal belt and working out the mounting yourself. The original lap and diagonal belt mounts were not built for a competition harness, so a cage, a bolt-in harness bar, or a fabricated anchor point is the correct route for a car heading anywhere near track use.

The Schroth Profi 3×2 at £370 and the TRS Magnum 6 Point Superlite at £294.00 are both FIA 8853-2016. The TRS Magnum 4 Point at £139 is FIA 8854-1998. All three carry a stamped expiry date regardless of wear. For a road or trackday car, the Takata Drift II and III and the TRS Clubman belts cost less, though none of those four are HANS compatible.

💬
Our recommendationConfirm the anchor before the belt

Tell us whether the car is caged, what is behind the seats now, and whether a head restraint is going in, and we will tell you what the shoulder straps can anchor to before you spend anything on the belt.

Roll cages

Custom Cages build a Historic CDS Roll Cage Kit at £1,425.00 and a Historic T45 Roll Cage Kit at £1,818.30 specifically for the TR6. Safety Devices cover the TR6 alongside the TR4, TR4A and TR5 on shared cage designs, from a 4 Point Rear Roll Cage at £469.20 up to a full Multipoint Bolt-In Roll Cage at £1,059.60.

If competing, check the specification against your class regulations before ordering, and keep the sign-off paperwork with the logbook. Pad any tube within reach of a helmet, and tell your insurer, because a cage is a notifiable modification.

What fits what

All seats below fit the TR6 on the Planted bracket, base mount, with no side mounts needed.

SeatMountingStyleNotes
Cobra Cub with headrestBase mountPeriod-flavoured fixed back£349.00
Cobra Cub without headrestBase mountPeriod-flavoured fixed back£279.00
Triumph TR6 Cobra Roadster 7 Narrow FitBase mountBuilt specifically for the TR6£569.00, narrow cabin fit
Corbeau SportsmanBase mountClassic-style reclining seat£468.00 suits period road use

Common questions

Planted Technology confirm one at £222.60 per seat, for 1969 to 1976, base mount. It is priced per seat, so two front seats means two orders.

Yes. It is a genuinely classic-style reclining seat, and the TR6 is exactly the kind of car it is built for, unlike a modern hot hatch where it would look and feel out of place.

Yes. The Triumph TR6 Cobra Roadster 7 Narrow Fit at £569.00 is built specifically for this car, worth considering if the standard-width options feel tight in the cabin.

Yes. Custom Cages build a Historic CDS kit at £1,425.00 and a Historic T45 kit at £1,818.30 specifically for the TR6. Safety Devices also cover it alongside the TR4, TR4A and TR5 on shared cage designs, from £469.20 to £1,059.60.

No. Every seat on this page is base mount and fixes directly to the Planted bracket.

More help

If you want the bracket or a cage confirmed against your specific car, the contact link is the quickest way to get it looked at.

Need a personal recommendation?

We're here to ensure you pick the right seat. Contact us today.
Our showroom virtual walk through!
Have a walk around our showroom before you even buy your new seats. 
Our hands on experience, is what allows us to bring you our recommendations.
Free UK Shipping

On all orders above £100

In-Store Shopping

Try before you buy

Easy Delivery Tracking

Aftership Tracking Updates