Top 5 Reclining Seat Choices For Your Mazda MX-5 NC (Mk3), Including Our Fitting Guide
A customer asked whether we sell reclining seats for an NC MX-5 that are more comfortable and supportive on longer drives. We do. Five base mount reclining seats suit it, and all five sit on one fitting stack: a Planted NC bracket and Sparco sliding runners. We compare them on trim, shell shape, head support, waist range and bolt pattern. The first things we'll ask you are which roof you have and how tall you are.
- Every seat here is a base mount reclining seat with a listed bolt pattern
- Four of the five share the 345mm x 271mm Sparco bolt pattern
- Product cards show live prices

Yes, and they all sit on the same Planted bracket and Sparco runners
The Planted bracket is handed and fitted one per seat, so a pair of seats means two brackets.
- Five reclining seats, from Sparco's slim-bolster R100 to the more sculpted Corbeau SVR
- One Planted NC bracket (SB110) and one Sparco runner kit under each seat
- The NC is the roomy MX-5, so the choice of shell is wider than on the ND
- Tell us soft top or PRHT, your height and your waist before you order
The fitting stack: one bracket and one runner kit per seat
A reclining seat is a base mount seat, so it needs something between its base and the car. On the NC that is two parts. The Planted Technology bracket for the NC chassis, part SB110, is the car specific piece. A Sparco sliding runner kit bolts to the underside of the seat and gives you fore and aft adjustment.
This is the combination our existing NC guide recommends for every base mounted reclining seat, and the same stack carries all five seats below. The Planted bracket is handed, with a driver side and a passenger side option. That means one bracket for each seat you fit, however many seats that is.
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Product cards show prices excluding VAT. Prices in the text include VAT.
For one seat that is one bracket and one runner kit. A pair of seats takes two brackets and the two seat runner kit, and the stack stays the same whichever of the five you pick.
Five reclining seats for the NC
| Seat | Trim | Shell | Waist range | Bolt pattern |
|---|---|---|---|---|
| Sparco R100 Vinyl | Vinyl | Slim bolsters on a tubular steel frame | 32 to 36 or 36 to 38 inch | 345mm x 271mm |
| Sparco R500 Fabric | Cloth | No head support wings | 32 to 38 inch | 345mm x 271mm |
| Sparco R100 Martini Racing | Vinyl, Martini livery | R100 specification with an integrated headrest | 32 to 36 inch | 345mm x 271mm |
| Sparco GT Houndstooth Edition | Houndstooth centres, vinyl outers | One of the more accommodating Sparco shells | 32 to 36 or 36 to 38 inch | 345mm x 271mm |
| Corbeau SVR Vinyl (pair) | Vinyl, black stitching | Most sculpted of the three Sportline shells | 32 to 36 or 36 to 38 inch | 291mm x 330mm or 345mm x 271mm |
The Corbeau SVR is sold as a pair and every other seat singly. Details come from the live listings.
1. Sparco R100 Vinyl: the slim-bolster seat with the widest fit
The R100 is Sparco's entry reclining seat. It has a tubular steel frame, deliberately slim bolsters and a 4 point harness facility. The vinyl wipes clean, and the listing offers a diamond stitched panel upgrade.
Slim bolsters give less lateral hold than the deeper shells higher in Sparco's range. The NC is the roomy MX-5, so you are not squeezed into a narrow shell, and the listing covers all heights with both a 32 to 36 and a 36 to 38 inch waist, the widest fit on this page.
Every other Sparco seat here uses the same stack, so changing seat later leaves the bracket and runners where they are.
- Vinyl, black, steel frame, base mount, seat only
- 345mm x 271mm bolt pattern
- All heights, 32 to 36 or 36 to 38 inch waist
- Road and Track approval
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
2. Sparco R500 Fabric: cloth trim and no head wings
The R500 is a reclining sport seat on a steel frame, trimmed in cloth throughout. It mounts on the same 345mm x 271mm pattern as the R100, so it uses the same bracket and runners. The listing says it has no head support wing, which suits cars with a low roofline.
The waist range runs from 32 to 38 inches in a single seat. The listing also says it works with a standard diagonal seatbelt as well as a 4 point harness, which helps on a seat that will mostly do road miles. Garreth would choose it if you prefer cloth to vinyl.
- Cloth, black, steel frame, base mount, seat only
- 345mm x 271mm bolt pattern
- All heights, 32 to 38 inch waist
- 4 point compatible
3. Sparco R100 Martini Racing: the R100 in Martini colours
The Martini Racing edition puts the livery on the same specification as the standard R100. The listing gives the part number as 009014MRNR and says the mechanical spec does not change. It is vinyl, it has an integrated headrest, and it suits all heights.
The listing is plain that if the colour scheme does not matter to you, the standard R100 does the same job. Garreth would say the same: choose this one because you like how it looks in the car.
- Vinyl, black, steel frame, base mount, seat only
- 345mm x 271mm bolt pattern
- All heights, 32 to 36 inch waist
4. Sparco GT Houndstooth Edition: a roomier shell with a trim to match
The GT Houndstooth Edition has black and white check centre panels against black vinyl outers. The listing calls the GT one of the more accommodating shells in Sparco's reclining range, with all heights and a 32 to 36 or 36 to 38 inch waist. It also says the seat takes a four point harness and works with the standard diagonal belt.
The vinyl takes the scuffing on the bolsters where you get in and out, and the cloth centre stays comfortable where you sit. It shares the 345mm x 271mm pattern with the R100, so the NC stack underneath is exactly the same.
- Houndstooth centres with vinyl outers, base mount, seat only
- 345mm x 271mm bolt pattern
- All heights, 32 to 36 or 36 to 38 inch waist
- 4 point compatible
5. Corbeau SVR Vinyl pair: the most sculpted of the five
The Sportline SVR is a reclining base mount seat in black vinyl with black stitching. The listing says the SVR is the most sculpted through the sides of the three Sportline shells, and that it grips you better than a factory seat without the commitment of a fixed bucket.
It is sold as a pair. The listing shows two bolt patterns, 291mm x 330mm and 345mm x 271mm. The Sparco runner kit is listed for Corbeau base mount seats on the 345mm x 271mm pattern, so we will confirm which pattern applies to your pair before anything is ordered.
- Vinyl, black stitching, base mount, seats only, sold as a pair
- Bolt pattern listed as 291mm x 330mm and 345mm x 271mm
- All heights, 32 to 36 or 36 to 38 inch waist
What the NC gives you, and what to tell us
The Planted listing describes the NC as the roomy MX-5. Mazda made the third generation larger than the NA and NB and considerably larger than the ND, so a tall driver who has struggled in other MX-5s has a better chance here. Headroom and shoulder room are both better, which is why this page can include shells with a little more width to them.
The PRHT versions have a folding hard top that takes space behind the seats, so tell us which body you have and how tall you are. Those two answers decide what is comfortable.
Drop us an email or click to open a chat with your height, your waist and whether you have the soft top or the PRHT, and we will point you at the right one of the five.
Seeing them fitted
Our Customer Builds page shows cars we have fitted, and our NC bucket seat guide covers fixed seats if a reclining seat turns out not to be what you want. To find out how the R100 feels for your height and waist, message us and we will talk it through.
Common questions
Do you sell reclining seats that suit an NC MX-5?
Yes. The five on this page are all base mount reclining seats. They use one fitting stack, the Planted NC bracket and a Sparco runner kit, so the choice of seat does not change what sits underneath.
Will they bolt straight in?
They bolt to the Planted bracket with the Sparco runners in between, and because mounting stacks are specific to the seat pattern, tell us the seat you’ve chosen and we’ll confirm the whole stack before you order.
Can I use a PCI Racing or Cybul frame instead?
Those frames are for side mount seats. The PCI Racing listing says side mount only, for a competition bucket, and the Cybul kit comes with its own side mounts. A reclining seat mounts through its base, so use the Planted bracket.
How many brackets do I need for a pair of seats?
Two. The Planted bracket is handed, so you choose driver side or passenger side, and the two seat Sparco runner kit covers both.
Does the soft top or PRHT make a difference?
It can. The Planted listing says the PRHT has a folding hard top that takes space behind the seats. Tell us which body you have along with your height.
Can I use the standard seatbelt with these?
The R500 and GT listings say the seats work with a standard diagonal seatbelt as well as a 4 point harness. The R100 listings give the same 4 point facility. Check the listing for the seat you pick, or ask us.
I am tall. Will I fit?
Every Sparco seat here is listed for all heights and the NC is the roomier MX-5, so give us your height and your waist and Garreth will tell you which of the five he’d put you in, and why.
What we would buy
Garreth
Garreth's top tip
For most NC drivers I'd take the Sparco R100 Vinyl. It has the widest fit on the page and it wipes clean. The stack under it is the one every other Sparco seat uses, so you're never boxed in.
If you prefer cloth, the R500 is the one, and if you want the nicest trim in the car, the GT Houndstooth is the one I'd go for.
Cameron
Cameron's fitting view
What I like about this car is that the fitting stays the same. It's one Planted bracket and one runner kit per seat, and all four Sparco seats sit on the same 345mm x 271mm pattern. That makes a later seat swap simple.
Give me your roof type and your height to start with. If it's the Corbeau SVRs, I'll confirm the bolt pattern on your pair too.
Not sure which seat or stack you need?
Tell us your roof type, your height and your waist. Cally, our digital receptionist, takes your details. Cameron comes back to you with the seat and the stack that fit before you order.

![Planted Technology Mazda MX-5 Miata [NC Chassis] (2006-2015) Seat Bracket](https://www.sportseats4u.co.uk/wp-content/uploads/sites/2/2026/08/SB110PA-2-300x300.jpg)




