The Sabelt Steel Race/Rally 3×3 6 Point Harness, part number CFCI1335S633S, is a clip-in 6-point competition harness approved to FIA 8853-2016. Shoulder webbing is 3 inch and lap webbing is 3 inch. Aircraft-type buckle. HANS friendly. Available in black, blue and red.
FIA 8853-2016 is the current 6-point harness standard used across UK club racing. The 3-inch shoulder and 3-inch lap combination is the widest webbing configuration in the Sabelt saloon harness range. Wider webbing distributes load over a greater area in an impact; some drivers find it more comfortable over a long stint, though it is heavier than the 2-inch versions.
Clip-in installation threads the shoulder straps around a bar or harness mounting point behind the seat rather than bolting to fixed eye bolts. This suits cars with a roll cage or a dedicated harness bar. If your car has fixed rear chassis anchor points, the bolt-in configuration of the Silver series may suit you better.
HANS friendly means the buckle and strap geometry are compatible with a HANS device. This harness is widely used in club racing where HANS devices are recommended but not always mandatory; if your series requires HANS specific certification, check the class regulations against this harness.
The Steel series is Sabelt’s entry competition tier. The Silver Race/Rally 3×3 (335A633SU2F) is the step up with lighter hardware in the same clip-in 3×3 configuration.









