The Sabelt Silver Race/Rally 3×2 6 Point Harness, part number 335S632SD2F, is a bolt-in 6-point competition harness approved to FIA 8853-2016. Shoulder webbing is 3 inch and lap webbing is 2 inch. Clip buckle. HANS friendly. Available in black, blue and red.
The Silver series sits above Steel in the Sabelt harness range: lighter hardware and webbing produced to tighter weight tolerances, while keeping the same FIA 8853-2016 approval. The 3×2 configuration uses wider 3-inch shoulder webbing combined with narrower 2-inch lap webbing. This is a common competition compromise: the 3-inch shoulder gives more contact area and comfort over a long event while the 2-inch lap saves weight on the lower straps.
Bolt-in installation anchors the shoulder straps to fixed rear chassis points using eye bolts. This is the preferred installation when the car has correctly positioned harness eye bolts with the right angle from seat to anchor point.
HANS friendly means the buckle and strap geometry are compatible with HANS device use. If your series requires a harness designated as HANS specific, check whether HANS friendly meets that regulation.
For the clip-in Silver equivalent in 3×3 configuration, see the Silver Race/Rally 3×3 (335A633SU2F) at £319. For the Silver 2×2 clip-in, see the Silver Saloon/Rally 6 Point (210A622SU2F) at £337. The Steel 3×3 clip-in (CFCI1335S633S, £205) is the entry-level equivalent at lower cost.








