Recaro’s direct fit sub-frame for the Volkswagen Transporter T6, 367.5 per frame, which is per seat.
What the frame does
The frame is the car side of the fitting. It bolts to the floor through the factory points and gives the seat something made for this car to sit on.
The car it is for
The T6 van from 2015. The seat mounting carried over from the T5, so this is Recaro’s T5 frame listed under the T6. If the van is a T6.1 from 2019, say so when you order so we can confirm.
The mounts in between
The frame is the bottom of a three-part stack: frame, Recaro side mounts, seat. The mounts are not included. Recaro homologate them with the seat as one system, so they come from Recaro and from their own page.
Send us the registration and the seat model and we will put the frame, the side mounts and any runners together for you.
Will this fit my car?
This frame is car-specific, so match the vehicle in the product name to your exact car and generation. If you are unsure, send us the registration and we will confirm before you order.
Which seats does it take?
Check the bolt pattern in the specification against your seat. The Compatible seats tab above lists what bolts straight on. If your seat is not listed, tell us what you run and we will confirm the fit.
Do I keep fore-and-aft adjustment?
Only with a sliding runner between the frame and the seat, which is a separate part on Recaro frames. If more than one person drives the car, budget for the runner. Our guide to sliding runners explains the options and widths.
Is this for the driver or passenger side?
Both sides are available on this listing, pick driver or passenger side at the point of order (sides listed are for right-hand-drive cars). Left-hand-drive car? Ask us, as the sides swap over and availability varies by model.