A PCI Racing adjustable seat mount for the Toyota GT86 and Subaru BRZ, 2013 to 2022. Part number SM-FRS-A1.
One mount for both cars, which follows from the GT86 and BRZ being the same car with different badges. The part number references the Scion FR-S, which is the same car again under a third badge.
The low option
PCI’s adjustable mount gives the largest range of adjustment and the lowest possible seat fitment in their range. In a GT86 or BRZ that is worth having if you run a helmet, because the roofline is low and a seat mounted on a slider eats the clearance you were trying to create.
The trade is that the seat is set at installation and stays there. The hardware interlocks into the slots in the seat base, so the position can be changed later with one tool without removing the mount from the car, but it does not move on rails.
If the car is shared, the sliding sub frame is the version to buy.
Construction
Laser cut and CNC formed from one piece of 1/8 inch carbon steel, gloss black powder coat, grade 10.9 8mm hardware, five and six point sub belt mounting locations built in.
Ordering
Side mount, for a competition bucket, on the factory seat mounting points. Handed, order twice for a pair.
Have you written anything useful for my car?
Yes: Customer Question: Fitting A Bride Stradia III Into A Toyota GT86 (ZN6), and Customer Question: How Do I Fit The Sparco R100 Seat Into My Subaru BRZ?. Those are written around the same car, from real fittings and customer questions, so they are worth a look before you decide.
Will this fit my car?
This frame is made for the Subaru BRZ, Toyota GT86. Chassis code and years matter more than the badge, as floor pans change between generations, so if your car sits near a changeover year, send us the registration and we will confirm before you order.
Which seats does it take?
Check the bolt pattern in the specification against your seat. The Compatible seats tab above lists what bolts straight on. If your seat is not listed, tell us what you run and we will confirm the fit.
Do I keep fore-and-aft adjustment?
Only with a sliding runner between the frame and the seat, which is a separate part on PCI frames. If more than one person drives the car, budget for the runner. Our guide to sliding runners explains the options and widths.
Base mount or side mount, and does it matter?
This is a side-mount frame: the seat hangs between side brackets bolted through its flanks, the motorsport-style stack that gives fine height and angle control. Our guide on base mount versus side mount explains the whole fitting stack.
Is this for the driver or passenger side?
Both sides are available on this listing, pick driver or passenger side at the point of order (sides listed are for right-hand-drive cars). Left-hand-drive car? Ask us, as the sides swap over and availability varies by model.
