A PCI Racing adjustable seat mount for the Honda CRX, 1988 to 1991. Part number SM-CRX-A1.
The CRX is small, very light and still competitive in club events, which is why they are still being built rather than simply preserved.
Why the adjustable mount suits it
Two reasons. PCI’s adjustable mount gives the lowest possible seat fitment in their range, which matters in a car with a low roofline and often a roll bar behind the driver. And it is lighter and more rigid than a slider, which in a car this light is worth having.
The seat is set at installation and stays there. The hardware interlocks into the slots in the seat base, so the position can be changed later with one tool without taking the mount out of the car.
Check the floor first
Thirty five year old floorpans deserve a look with the carpet up. A mount feeds seat load into the factory mounting points and it can only do that if the metal round them is sound.
Construction
Laser cut and CNC formed from one piece of 1/8 inch carbon steel, gloss black powder coat, grade 10.9 8mm hardware, five and six point sub belt mounting locations built in.
Ordering
Side mount, for a competition bucket. Handed, order twice for a pair.
Tell us the seat and your height, because in a car this size the shell decides as much as the mount.
Will this fit my car?
This frame is made for the Honda CRX Second Gen. Chassis code and years matter more than the badge, as floor pans change between generations, so if your car sits near a changeover year, send us the registration and we will confirm before you order.
Which seats does it take?
Check the bolt pattern in the specification against your seat. The Compatible seats tab above lists what bolts straight on. If your seat is not listed, tell us what you run and we will confirm the fit.
Do I keep fore-and-aft adjustment?
Only with a sliding runner between the frame and the seat, which is a separate part on PCI frames. If more than one person drives the car, budget for the runner. Our guide to sliding runners explains the options and widths.
Base mount or side mount, and does it matter?
This is a side-mount frame: the seat hangs between side brackets bolted through its flanks, the motorsport-style stack that gives fine height and angle control. Our guide on base mount versus side mount explains the whole fitting stack.
Is this for the driver or passenger side?
Both sides are available on this listing, pick driver or passenger side at the point of order (sides listed are for right-hand-drive cars). Left-hand-drive car? Ask us, as the sides swap over and availability varies by model.
