Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Mazda MX3 1992 to 1998 Bucket Seat and Fitting Guide

Plan the MX3 driving position and lower fittings together

For an MX3 seat change, bring the car details and the driving position you want into the same enquiry. Planted’s SB131 application names Mazda MX3 from 1992 to 1998. That is the fitting range used in this guide.

Garreth would try the cushion and bolster access before deciding on a finish. Cameron would compare the existing mounts and occupied seating position with the proposed assembly. Include the adjustment and access you need when choosing the seat.

At a glance

  • The manufacturer application for SB131 names Mazda MX3, 1992 to 1998; MX-3 is another spelling used in our listing.
  • SB131DR identifies physical left and SB131PA physical right; match the supplied variation to the actual steering side.
  • The Cobra-prefixed alternate codes describe a separate runner-pattern choice from the physical seat position.
  • Record the current floor mounts and any earlier seat or bracket conversion.
  • Measure the existing occupied driving position before comparing the complete replacement assembly.
  • The named 345mm by 271mm Sparco drawing is a seat-side reference; the MX3 floor requires its own measurements.

Match the MX3 build to the stated fitting application

The manufacturer records name Mazda MX3 1992 to 1998 for SB131. Send the actual build and vehicle identification with the enquiry. Include the body, steering side and original seat details.

A vehicle’s production history and a bracket’s fitting range answer different questions.

Our shop uses MX-3 as well as MX3 wording. Keep the build details beside that model name when choosing the supplied part. Cameron would check the original mounting locations and any previous conversion before completing the recommendation.

Record the driving position you want to keep or change

Sit in the current seat and record the position that works for pedal reach and the steering wheel. Note the occupied cushion height and the room available around the shoulders. Take photographs from the side as well as above the lower fittings.

Tell us whether the aim is more support, a different height or a wider range of adjustment.

Use those observations when trialling a complete replacement assembly. The cushion, backrest angle, runner and supports all contribute to the result. An individual floor-bracket code cannot predict the finished seat height.

Match the SB131 reference to the actual seating side

The listed SB131 is the floor-bracket route for Planted’s named MX3 application. The maker identifies SB131DR for physical left and SB131PA for physical right. Specify the physical position that needs changing.

The shop’s RHD driver and passenger labels need matching to the full supplied variation code and actual steering side.

Choose the upper connections with that bracket. Include the runner or fixed arrangement, any shell supports and the retained buckle hardware in the parts list. Check the quantities separately when planning both front seats.

Manufacturer physical-side and alternate references
Physical positionManufacturer referenceCobra alternate reference
LeftSB131DRCOBRA-SB131DR
RightSB131PACOBRA-SB131PA

Choose the runner pattern using the complete component references

Planted’s general FAQ distinguishes Standard and Alternate slider patterns. Wide Cobra and Scheel-Mann runners use its Alternate pattern; the narrow Cobra pattern is included on both. Confirm which runner version you are selecting.

The SB131 application records include Cobra-prefixed alternate codes for both physical sides.

Give us the complete seat and runner references so both fixing interfaces can be compared. A physical-left code alone does not settle the runner-pattern choice. Cameron would check that supplied version before the parts list is completed.

Compare fixed-back seats by support and mounting route

The Cobra Monaco Pro is a fixed-back steel-frame candidate with listed base and side mounting choices. Try the cushion and bolster shape with the driver. Confirm the exact seat version and chosen lower mounting arrangement together.

The standard Sparco Sprint card uses the BRR0003 family reference, with base and side fixing routes in the maker catalogue.

The OMP TRS-E Velour is another steel-frame choice with both mounting routes listed. Compare support and entry as well as the seated position. Garreth would settle that driver fit before choosing the trim and MX3 lower assembly.

Try reclining choices with their controls and lower fittings

The Sparco R100 is a reclining, base-mounted option to try. The linked shop record uses legacy 00961NR, while the newer catalogue gives the 009014 family. Match the actual supplied version before applying the catalogue drawing.

The Corbeau Sportline RRS card is a pair on the listed standard base. Each physical seat position needs its own vehicle bracket and selected upper arrangement. Confirm the current contents and quantities as a complete order.

The Cobra Misano Anniversary has its own reclining mechanism, shell and trim choices. Try the controls beside the actual tunnel and door with the seat in position. Include backrest movement and any access needed behind the front seats.

Match the Cobra runner to both connections

The Cobra Premium runner listing offers 291mm and 405mm handle-width options. Select the actual runner for the chosen seat and supplied SB131 pattern. The handle-width label alone cannot establish the lower fixing layout.

Send the full Monaco or Misano reference with a Cobra runner enquiry.

Check the seat connection above the runner and the bracket connection beneath it independently. Trial the travel and release-handle access in the MX3. Include the runner thickness when comparing the occupied driving position.

Specify the Sparco slider with the actual seat version

The Sparco 0049306 runner is a sliding option to discuss with the named Sparco seats. A 271mm longitudinal fixing distance appears in the catalogue. Compare its complete layout above and below with the supplied seat, any supports and actual SB131 version.

The named Sprint and R100-family base fastenings below measure 345mm by 271mm at the seat side.

Trial both rails through the travel required and check that they release and lock together. The handle and surrounding trim need room throughout that movement. Matching one fixing distance leaves the rest of the assembly to confirm.

Use supports specified for the chosen side-mounted shell

A side-mounted shell uses supports between its side fixings and the lower assembly. The Sparco steel supports shown here are a candidate for the selected Sparco shell and its instructions. Specify a different family’s own confirmed support arrangement.

The seat’s side connections and the support’s lower hole pattern are separate interfaces.

Cameron would check the exact shell, support orientation and specified fasteners before comparing the lower connection. Keep any runner and the supplied SB131 version in that comparison. The floor application alone cannot identify the correct upper parts.

Plan fixed positioning as its own complete arrangement

Planted publishes separate installation arrangements for base-mounted and side-mounted seats, with and without sliders. Its FAQ describes its own side mounts with sliders beneath them. Specify the complete fixed arrangement if adjustment is not required.

Removing the runner changes the connection as well as the finished position.

Trial the proposed parts in the actual car using the relevant component instructions. Check reach, clearance and any rear-access requirement with the driver. Garreth would include getting over the bolster before committing to that fixed position.

See the named Sparco seat-side centres at one scale

The named Sprint and R100-family lower fastenings in the Sparco catalogue are 345mm across and 271mm front to rear. The drawing uses one scale for both dimensions. Confirm the exact supplied seat version before using those centres to select parts.

The Mazda floor pattern, full SB131 slot layout and outside shell measurements are separate references.

Compare the preferred seat and complete lower assembly with the position recorded earlier. Include shoulder clearance and access to the controls in the actual cabin. Use an exact Cobra, Corbeau or OMP drawing for that version’s own seat connection.

Seat-side bolt centres 345 by 271 millimetres, drawn to scale345mm across271mm front to rearSeat-side bolt centres; outer frame outline is schematic

Source: Sparco 2025 manufacturer catalogue, printed pages 178 and 326 to 327. The shop’s R100 reference needs supplied-version matching.

Choose the restraint with the shell and actual anchors

Include the intended belt arrangement in the seat enquiry. Match the selected shell and restraint instructions to the actual anchors and driver. Photograph the existing buckle connection and hardware.

For a harness plan, show any proposed bar or cage and its specified attachments.

Check shell openings, strap configuration and anchor locations together before choosing the harness product. Trial routing and buckle access with the complete seat assembly in position. A bracket tab alone does not establish that arrangement.

  • Original belt: check the exact shell, buckle position and retained mounting hardware.
  • Harness: confirm the required straps, shell openings and available anchor arrangement together.
  • Two seats: specify each physical side, quantities and the adjustment needed by each occupant.

Bring the vehicle details and seating-position notes together

Send the actual build, body and steering side with photographs of the original floor mounts. Show any previous conversion and the present buckle connection. Include the full seat and fitting references you want to consider.

Add the current occupied position, adjustment wanted and any rear-access requirement.

We can then compare the physical side, supplied SB131 pattern and upper assembly as one parts list. Tell us which original functions and belt arrangement need to remain. Cameron would check the complete trial position with the driver before confirming reach and clearance.

Common questions

Which years does the SB131 fitting application name?

The manufacturer records name Mazda MX3 1992 to 1998. Use that stated fitting range with the actual build and original floor details. A wider vehicle-production date does not extend the bracket application.

Are MX3 and MX-3 separate fitting applications here?

Both spellings appear in the shop and manufacturer records for this enquiry. Keep the actual build and vehicle identification with the model name. Confirm the supplied SB131 against the original mounting locations.

Which manufacturer reference is physical left or right?

SB131DR identifies physical left and SB131PA physical right. Cobra-prefixed alternate codes retain those physical positions. Match the actual steering side and full supplied shop variation code.

What should I measure before changing the seat?

Record the occupied position that works for pedal and steering reach, cushion height and shoulder room. Include photographs of the present lower assembly. Use those observations to trial the proposed complete replacement.

What if an earlier owner changed the mounts?

Show the original mounting locations and the current adapters or alterations in photographs. Include the previous parts references where known. Check the maker application against the floor and assembly the car actually has.

How do I choose Standard or Alternate runner patterns?

Planted’s general FAQ directs wide Cobra and Scheel-Mann runners to the Alternate pattern and includes the narrow Cobra pattern on both. Send the full seat and runner references. Confirm the supplied SB131 version and both fixing interfaces.

Does the RRS pair include two MX3 brackets?

The linked card is a pair of seats on the named standard base. Specify a vehicle bracket and selected upper arrangement for each physical side separately. Confirm the actual contents and quantities before ordering.

Can I specify a fixed seat assembly?

Ask us to specify the complete fixed arrangement for the exact shell and car. Removing sliders changes the connection and finished position. Trial the assembly with the actual driver using the relevant component instructions.

How do I check access behind the front seats?

Describe the access you need before selecting a seat. Trial the backrest movement, controls and complete lower assembly in the car. The bracket application alone cannot establish usable access.

What does the scaled 345mm by 271mm drawing describe?

It describes the named Sparco seat-side lower fastening centres in the manufacturer catalogue. The Mazda floor and full SB131 layout need separate references. Match the actual supplied seat version and every remaining connection.

Will the replacement sit lower?

The occupied cushion, shell angle and lower fittings determine the result. Compare the present position with a trial of the proposed complete assembly. The floor-bracket reference alone cannot predict a reduction.

What information completes a fitting enquiry?

Send the actual build, body, steering side and original-mount photographs. Include the exact seat and fitting references, current occupied position, adjustment and rear access wanted, retained functions and intended belt arrangement. Show previous adaptations.

Garreth’s top tip

Garreth would try the cushion, support and entry before choosing the finish. Keep the way the MX3 is used and any access behind the front seats in that decision. The exact seat can then lead the complete fittings enquiry.

Cameron’s fitting view

Cameron would put the actual build, floor photographs and occupied-position notes beside the SB131 reference. Confirm physical side and supplied runner pattern before selecting the upper connections. Trial the full assembly with the driver.

Plan your Mazda MX3 1992 to 1998 seat change

Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.

Back to the Car Seat Selector guide.

Sources: Planted application records, slider-pattern and market guidance and assembly-specific instructions; Sparco 2025 catalogue, printed pages 178 and 326 to 327; linked shop listings. Confirm the current supplied versions and actual car before completing the package.

Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text