Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Lotus Elise S3 Bucket Seat and Fitting Guide

Which fitting route suits your Elise S3?

“Can I change the seats in my Elise S3 and keep sliding adjustment?” We would start with the car’s build details and the assembly already beneath the seat. Tillett’s original-runner brackets, its fixed system and a Reverie conversion of Lotus hardware each require a different parts list.

Garreth would try the shell for support and access in the trim you want to use. Cameron would match the seat reference and physical side to the original mountings. Bring photographs of the existing assembly with your enquiry.

Orange Lotus Elise S3 with bronze wheels viewed from the front right in a paddock
Illustrative 2015 Elise S with bronze wheels and original black sports seats.

At a glance

  • Identify the exact S3 build, VIN details, steering side and original seat/subframe before choosing the kit.
  • Tillett EBR has a pre-2017 original-runner application with the maker’s VIN serial boundary 1457.
  • Tillett EBS is a fixed U-channel system; its pre-2017 application includes 383mm front-to-rear floor-hole spacing.
  • Reverie C/XC/XRC uses its specified original-subframe conversion; driver and passenger packages differ.
  • Compare the complete seat and lower assembly for position and clearance. The scaled bars below show shell widths.
  • Choose the belt or harness with the exact shell and anchorage arrangement before finalising the fittings.

Identify the S3 and its existing mountings

Lotus dates this later Elise period from 2010 to 2021, with the revised range announced in 2010 and engines spanning 1.6 and 1.8 litres. Use that year information alongside the build details and actual seat hardware when choosing the fitting.

Send the VIN details and steering side, then identify whether the enquiry is for the physical left or right seat.

Photograph the original runners, floor connections and subframe reference where available. An earlier seat conversion needs its own component check. Cameron would also record the current driving position and the change you want to make.

Use EBR with the identified early original runners

Tillett describes EBR for mounting its named side-mounted shells above original Elise/Exige runners on pre-2017 cars. The maker identifies VIN serial number 1457 at that boundary. Confirm how that boundary applies to the actual car and runner assembly before choosing the brackets.

Tillett specifies 3mm steel with a 2° draw angle and names B6 Screamer, specified B6XL and B7 versions, and B8-43/B9-43 among the compatible shell families. Give the complete shell reference and edge option with the enquiry.

This original-runner route uses the identified runners already in the car. Confirm their condition and the current bracket hardware together. A separate runner added to the order needs its own assembly specification.

Specify EBS for a fixed Tillett installation

The EBS system uses an upright bracket in a U-channel. Its pre-2017 Elise/Exige application names the VIN serial boundary 1457 and 383mm front-to-rear floor-hole spacing. Match those details to the actual S3 and supplied revision.

The upright can be positioned along the channel in 10mm increments, then secured for use. Seat angle and height are set within the assembly. This provides fitting adjustment; it is a fixed installation once secured.

The current maker list includes B6 Screamer, B8 and B10 families, with version-specific conditions. B10-XL 45 has a driver-side condition. Standard B6/B6XL versions need the specified side mounts. Cameron would confirm the exact shell and complete current package before recommending the set.

Match a later car to its own lower assembly

For later original runners, Tillett identifies the separate EBR17+ bracket. Its current EBR information also describes a fixed assembly above ERAIL for later cars. That combination uses its own lower parts and mounting conditions.

Tell us whether you want operating sliding adjustment or a position set during fitting.

We would confirm the actual floor and runner arrangement with the current manufacturer instruction. Keep every bracket, rail and fixing in that specification. An early EBR or EBS application alone cannot establish the complete package for a later S3.

Match the C/XC/XRC conversion to the original subframe

Reverie’s current driver conversion detail names Elise S3 applications through 2019 for the specified Mulsanne C, narrow XC and XRC shells, using identified original hardware. Give the actual build and original subframe reference so the conversion can be matched to the car.

The maker identifies R01SI0039 as RHD driver and R01SI0053 as LHD driver. Its separate passenger packages are R01SI0063 for RHD and R01SI0064 for LHD. Confirm the full manufacturer reference and physical seating side with us before selecting the shop option.

The driver conversion and passenger A340 subframe replacement involve different parts. Establish the retained or supplied rails, conversion brackets and crossmember as one package. The maker’s instructions also give original-subframe and restraint conditions that must stay with that assembly.

A 2020 or 2021 car needs its own current confirmation with the actual mounting arrangement.

Compare the shell around its intended use

The standard B6 Screamer GRP is the competition-oriented option here, with FIA 8855-1999 homologation listed for its 400mm and 440mm external leg-width versions. Match the supplied seat label and the requirements of the intended event. Specify the shell and its side-mount assembly together.

The B8 GRP offers 430mm edges-off and 445mm edges-on widths. Its swept-away hip area accommodates standard three-point belt or harness use, subject to the complete installation. This is a Road and Track shell with no FIA homologation.

The B10 has cut-away sides intended to accommodate a standard belt and help access. Our standard listing offers GRP or carbon/GRP and panel choices. Match its exact version to the named lower assembly; it is also a Road and Track seat.

Garreth would sit in the intended cushion and compare access over the bolster before choosing the finish. Check where the shoulder openings sit relative to the driver. The trim and shell shape belong in the same decision.

Specify the Mulsanne C shell with its conversion parts

The Mulsanne C shown here is the R01SI0001 twin-skin carbon shell with its own fixed-back shape and harness openings. Match that complete seat reference to the current C-family conversion instruction and actual original subframe.

Try the intended padding and check support at the hips and shoulders.

Garreth would include getting across the sill in the seat trial. Cameron would check the shell at its intended installed angle with the complete fittings. The seat’s family description does not establish the final position in every S3.

Confirm the narrow XC version before its fitting kit

The narrow XC listing shown here carries R01SI0047. Reverie’s conversion information distinguishes the named narrow X/XR families from other shell versions. Confirm the full current seat code and conversion package together before ordering.

The shell shape and padding need their own trial with the driver.

Obtain the exact selected-version dimensions for a clearance check; the B6/B8 measurements below describe different shells. Another Reverie seat with a different mounting interface also needs its own fitting specification.

Compare standard B6 Screamer and B8 widths at one scale

Tillett’s drawings give the standard B6 Screamer a 340mm internal hip width and the B8 a 365mm internal hip width. The blue bars show external leg widths; the grey bars show the internal hip measurement. Those measurements describe different parts of the shell.

The bars use one SVG unit per millimetre, with the same scale for both seats.

The standard B6 Screamer also has 430mm shoulder width, 695mm projected length and 810mm overall height in its drawing. The B8 gives 445mm shoulder width, 760mm projected length and 860mm overall height. Cameron would check the intended installation angle and lower assembly against the actual cockpit.

B6 Screamer and B8 widths drawn to the same scaleStandard B6 Screamer outer leg widths are 440mm with edges on and 400mm with edges off, with 340mm internal hip width. B8 outer leg widths are 445mm and 430mm respectively, with 365mm internal hip width. Bars use one SVG unit per millimetre.B6 Screamer: outer leg width, edges on440mmB6 Screamer: outer leg width, edges off400mmB6 Screamer: internal hip width340mmB8: outer leg width, edges on445mmB8: outer leg width, edges off430mmB8: internal hip width365mm100mm scale; dimensions from Tillett drawings
Blue bars show external width across the leg area. Grey bars show internal hip width, measured at a different part of the shell. Standard B6 Screamer and B8 only; check the selected version and padding.

Use the original B6 Screamer and XL drawing and B8 drawing for the measurement locations. The comparison uses standard B6 Screamer dimensions. An XL, B10 or Reverie seat needs its own selected-version dimensions.

Choose the adjustment with the fitting route

The EBR original-runner route retains identified car runners. EBS uses a fixed position set within its channels. EBR above ERAIL is another fixed assembly with its own lower parts.

With a Reverie conversion, establish which original adjustment components remain and which are replaced.

Explain whether more than one driver needs to use the car and the travel required. We would check that movement against the seat, controls and restraint routing, then trial the complete assembly through the range that will actually be used.

Make a recliner enquiry around the complete assembly

If backrest adjustment is the priority, send the exact reclining seat and S3 build details for a fitting enquiry. Its mechanism and controls need room beside the shell. We would check the lower connection and useful backrest movement before recommending the package.

The fixed-shell systems described above have their own named seat applications.

Choose the restraint with the seat and anchor arrangement

Decide the intended restraint before completing the parts list. The B6 Screamer information recommends a five- or six-point harness. B8 and B10 information describes standard-belt or harness use, with the actual seat and fitting instructions followed.

EBS V3 gives specific hip-belt mounting and bush options. Confirm the supplied revision, buckle connection and hardware with the selected restraint. Those lower mounting details form only part of the complete installation.

Reverie’s original-subframe conversion detail is described for harness use. Send photographs of the existing anchors and any proposed harness bar or cage. We would match the shoulder and lap routes, buckle position and lower straps to the seated driver.

  • Standard belt: select a suitable shell and confirm the buckle position and mounting hardware.
  • Harness: identify the exact seat, strap configuration and anchor arrangement before selecting the product.
  • Existing conversion: include photographs and component references so the retained parts can be checked.

Bring the S3, seat and fitting details together

Send the build/VIN details, steering side and physical seating position with the full seat reference. Include the edge, shell and trim options where relevant. Add photographs of the original mounting arrangement and any earlier conversion.

We can then confirm the current supplied parts and the original components retained by that particular route.

If a lower driving position is the aim, measure the current position before the seat trial. The shell angle, cushion and fittings beneath it affect the final result. Compare the complete proposed assembly with the driver seated.

Common questions

Does one fitting kit cover every Elise S3?

The listed routes have different build and hardware conditions. Give the VIN details, steering side and actual mounting arrangement with the seat reference. We would match the current complete assembly to that car.

Can I keep the original sliding adjustment?

EBR has a named application above identified pre-2017 original runners, with the maker’s VIN serial boundary 1457. Later original-runner arrangements need their own current bracket specification. Confirm the actual runners and complete shell reference before ordering.

How does EBS adjustment work?

The upright is positioned within a U-channel at 10mm intervals and then secured. This is a fixed installation with position set during fitting. Its pre-2017 application also specifies the VIN boundary and 383mm front-to-rear floor-hole spacing.

What should I ask about a 2017 or later car?

Send the build/VIN details and photographs of the lower mountings. Ask for the exact current original-runner or fixed arrangement with the chosen shell. EBR17+ and the EBR/ERAIL combination involve different components.

Which Reverie C/XC/XRC conversion is for each side?

The maker identifies R01SI0039 as RHD driver and R01SI0053 as LHD driver. Passenger packages are R01SI0063 for RHD and R01SI0064 for LHD. Confirm the full manufacturer code and physical side with us before selecting the current shop option.

Does the Reverie conversion retain the same parts on both sides?

The original-driver conversion and passenger A340 replacement are different packages. Identify the actual subframe and the retained or supplied rails. Confirm the complete current brackets, crossmember and hardware for the chosen shell.

Does the Reverie detail include a 2020 or 2021 S3?

The current driver-conversion detail names S3 applications through 2019. A later car needs its own current confirmation against the actual original hardware. Send the build details and complete seat reference.

Which seat should I try for standard-belt use?

B8 and B10 information describes standard-belt use with the appropriate complete installation. Try the exact shell and trim, then check the buckle and belt route. A competition-oriented B6 Screamer has its own restraint requirements.

Do the scale bars confirm clearance in my S3?

They show standard B6 Screamer and B8 shell measurements at the same scale. Check the selected seat, padding, installed angle and lower fittings in the actual cockpit. Other shells need their own dimensions.

How much lower will the seat sit?

The shell, cushion, angle and lower fittings determine the result. Measure the current position and trial the complete proposed assembly with the driver. A bracket code alone cannot establish a height reduction.

Can I fit a reclining seat?

Send the exact recliner for a complete fitting enquiry. Its lower connection, adjustment controls and backrest movement need checking together in the S3. We would establish that package before recommending it.

Are all rails and fasteners included?

Contents depend on the fitting route and current revision. Some arrangements retain original parts; others use a separately specified lower assembly. Confirm the supplied and retained parts list before adding individual components.

Garreth’s top tip

Garreth would try the seat for support and access before settling the shell and trim. Keep the belt choice and adjustment wanted in that decision. Those details help us recommend a fitting route suited to the way the Elise will be used.

Cameron’s fitting view

Cameron would identify the original mounting arrangement and physical seating side, then match the full seat and fitting references. Confirm the current supplied and retained parts together. Trial the assembly with the driver for position, usable movement and clearance.

Plan your Lotus Elise S3 seat change

Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.

Back to the Car Seat Selector guide.

Sources: Lotus Elise model history; current Tillett EBR and EBS applications; Reverie original-driver conversion detail; Reverie seat-specific instructions; linked Tillett dimension drawings and shop listings. Match the current supplied revision to the exact car and seat.

Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text