Honda Fit / Jazz GK Bucket Seat and Fitting Guide
Choose a complete seat package for your third-generation Fit or Jazz
A third-generation Fit or Jazz can use several different seat-fitting arrangements. Garreth would start with the support and adjustment you want, then try a recliner against a fixed bucket. Consider who drives the car and how often the rear cabin is used. Keep the seat model you prefer with the lower fittings on the same enquiry.
Cameron would identify the chassis and original market before selecting the bracket. The range includes a Planted third-generation application and six BRIDE rail types with H205 or H206 references. Their upper connections and supplied parts differ. Choose the route around the exact seat and the physical side of the car.
At a glance
- BRIDE names GK3, GK4, GK5, GK6 and GP5 from September 2013 in its Honda application table.
- Planted SB364 is listed for Honda Fit third generation, 2013 onwards; regional and actual-floor checks remain part of the enquiry.
- Planted DR is physical left and PA is physical right; BRIDE H205 is right and H206 is left.
- The Planted runner-pattern option needs confirming separately from the shop seating-side option.
- FO, FX, MO, RO, XL and XR each need their own seat and supplied-component match.
- Include the belt or harness arrangement with the seat, intended use and proposed attachment points.
Identify the chassis, original market and gearbox
Honda introduced the third-generation Fit in Japan in September 2013 with petrol and hybrid versions. The Japanese launch range included manual and automatic transmissions. Give us the actual chassis identification and powertrain with the model year. A regional Jazz registration date needs comparing with that information.
BRIDE’s Honda table names GK3, GK4, GK5, GK6 and GP5 in the row starting in September 2013. The linked BRIDE shop listings carry GK5 titles, so include the full chassis code when asking for a different code in that row. Check any other GK or GP code separately. The supplied package still needs matching to the particular vehicle and seat.
Tell us about an imported car or any earlier seat conversion. Photographs of the lower connections help identify existing adapters and altered fittings. Include the original market and steering position so the physical side stays clear throughout the quote.
For an earlier generation, use the Jazz GD guide or Jazz GE guide with that car identified. Those guides have their own fitting applications. The later GR generation also needs its separately named application.
Check the Planted bracket and runner-pattern option
Planted lists SB364 for Honda Fit third generation from 2013 onwards. It is the vehicle bracket beneath the chosen seat and upper components. Quote the full physical-side reference and the runner you intend to use. Ask us to compare the application with the actual car before ordering.
The manufacturer uses SB364DR for left and SB364PA for right on its Standard versions. Its Alternate versions carry COBRA-SB364DR and COBRA-SB364PA references. The shop seating-side selection needs checking alongside the separate runner-pattern requirement. Include that pattern choice on the fitting enquiry.
Standard includes the RECARO runner pattern; Alternate exchanges it for Cobra and Scheel-Mann patterns. Planted’s FAQ says the narrow Cobra pattern is on both, while wide Cobra and Scheel-Mann runners use Alternate. Match the actual runner drawing with the supplied bracket. Keep any required hardware on the same quote.
Planted develops its brackets around US left-hand-drive cars unless stated otherwise. Its FAQ asks for checks on other markets and notes some Canadian Acura and Honda floor differences. Send photographs and measurements of the existing floor connections for an imported or regional Jazz application.
-
From £224.95 Incl. VATFrom £187.46 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Match left or right before choosing the rail type
For a right-hand-drive car, physical right is the driver position and left is the passenger position. Planted calls its left bracket Driver / Left using its US steering basis. BRIDE uses H205 for right and H206 for left in this named application. Keep the physical position beside the full reference when comparing the two ranges.
The BRIDE suffix identifies the rail type, such as H205FO or H206XL. Use that complete code with the current seat model. A shared H205 or H206 prefix across application rows leaves the generation and supplied package to identify.
| Fitting route | Physical left | Physical right | Package detail |
|---|---|---|---|
| Planted Standard | SB364DR | SB364PA | Confirm exact car and Standard or Alternate pattern |
| BRIDE FO | H206FO | H205FO | Named side-mounted bucket families |
| BRIDE FX | H206FX | H205FX | Fixed competition arrangement |
| BRIDE MO | H206MO | H205MO | Named base-mounted seat families |
| BRIDE RO | H206RO | H205RO | Seat-specific and dedicated-rail qualifications |
| BRIDE XL | H206XL | H205XL | ZIEG IV Wide or ZETA III Type-XL |
| BRIDE XR | H206XR | H205XR | STRADIA II Wide, formerly Type-XL |
Compare the side-mounted BRIDE types with the bucket
The FO specification names fixed-bucket families and gives a 395mm-wide seat connection, with a 290mm length allowing 5mm either way. Its current list excludes ZIEG IV Wide, ZETA III Type-XL and ZODIA. Check the full seat version against the matching information and supplied stays.
BRIDE describes FX as a fixed competition arrangement with aluminium side stays. It gives the same stated seat-side dimensions as FO. Choose it when the fixed position suits the driver and intended use. Confirm its actual components before planning any additional adjustment.
The XL specification names ZIEG IV Wide and ZETA III Type-XL. Its stated connection is 430mm wide, with a 290mm length allowing 5mm either way. Keep the wide-seat designation with H205XL or H206XL. Trial the shell beside the door and console with that assembly in place.
-
From £264.00 Incl. VATFrom £220.00 Excl. VATPayPal CreditJust inSelect options This product has multiple variants. The options may be chosen on the product page
-
From £276.00 Incl. VATFrom £230.00 Excl. VATPayPal CreditJust inSelect options This product has multiple variants. The options may be chosen on the product page
-
From £294.00 Incl. VATFrom £245.00 Excl. VATPayPal CreditJust inSelect options This product has multiple variants. The options may be chosen on the product page
Choose the base-mounted type from its named seat list
BRIDE’s MO information includes EUROSTER and DIGO families, edirb models including 032 and 054, and named Sparco seats including Sprint. Its matching information names EUROSTER II and EUROSTER II CRUZ. Compare the current fixing drawing and actual supplied arrangement for the chosen version. Keep that seat identification with H205MO or H206MO.
The RO list includes GIAS and STRADIA families, with seat-specific and dedicated-rail qualifications. Cameron would check the complete seat name before confirming this type. Match the vehicle row and upper connection together. Similar-looking seat bases leave the named-seat requirements to check.
The current XR page specifies STRADIA II Wide, formerly called STRADIA II Type-XL. It gives a 260mm by 405mm base connection for that dedicated seat arrangement. Include the older full name if it appears on the seat label. A different wide recliner needs its own matching check.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditJust inSelect options This product has multiple variants. The options may be chosen on the product page
-
From £240.00 Incl. VATFrom £200.00 Excl. VATPayPal CreditJust inSelect options This product has multiple variants. The options may be chosen on the product page
-
From £264.00 Incl. VATFrom £220.00 Excl. VATPayPal CreditJust inSelect options This product has multiple variants. The options may be chosen on the product page
Try reclining seats with the adjustment you use
The EUROSTER II Fujiwara Edition, EUROSTER II CRUZ and edirb 054 are candidates to discuss with the named MO families. Try the back support and cushion with the driver. Move through the recline range you expect to use. Check that the control remains accessible beside the console and door.
For a Planted package, include the exact recliner and upper components in the quote. The bracket slots, runner and seat drawing need checking as a complete arrangement. Keep that route separate from a BRIDE vehicle rail supplied for a named seat.
Garreth would compare the seats with whoever regularly uses the car. Include entry and exit during the trial, especially where a pair will replace the original front seats. Count the lower fittings for both positions separately. Record any armrest or other option with the exact seat version.
-
From £1,265.47 Incl. VATFrom £1,054.56 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,892.80 Incl. VATFrom £1,577.33 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Compare each bucket with its own mounting arrangement
Try the ZETA IV, ZIEG IV Wide and Sparco Sprint for the support each gives the driver. Compare cushion depth and the position of the bolsters. Bring any headwear intended for the car into the seating trial. Check entry with the seat beside the actual door opening.
ZIEG IV Wide is a named XL choice, while Sprint appears in the MO list. ZETA IV needs the appropriate F-series seat-matching and supplied-support check. Include the current seat version and fixing drawing before settling the lower package. That keeps the different base and side connections clear.
A side-mounted bucket on a Planted bracket needs the specified upper supports and any runner between them. Confirm each connection and the hardware required for that assembly. Trial the complete package before measuring the finished sitting position.
-
From £1,211.39 Incl. VATFrom £1,009.49 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,460.16 Incl. VATFrom £1,216.80 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £252.00 Incl. VATFrom £210.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Check a separate sliding kit at both connections
The linked Sparco sliding kit is a candidate to compare with a suitable seat and Planted bracket assembly. Check its current reference and drawing against the seat connection and the supplied bracket pattern. Include the handle and fixing hardware on the package quote.
Establish the movement needed by each driver before choosing a sliding arrangement. Trial both tracks parallel and check that they move and lock through that range. Allow access to the release handle with the seat in its finished position. Include any supports specified between the seat and runner.
BRIDE rails have their own supplied-component requirements, and FX has a fixed competition arrangement. Ask what comes with the full vehicle-specific reference before adding another sliding kit. Quote those supplied parts alongside the exact seat instructions.
Choose supports for the exact shell and lower assembly
The linked Sparco steel supports are a candidate for an appropriate Sparco side-mounted seat. Check the current shell instructions and support dimensions together. Confirm their connection to the chosen runner or bracket and include the specified hardware.
Planted’s installation information separates side-mounted seats with runners from fixed arrangements. Its FAQ explains that its own side mounts are designed around runners between the mounts and bracket. Direct mounting needs the exact pattern and installation instructions checked. Identify the actual supports in your package before comparing that guidance.
A BRIDE rail may already have the stays required for its named seat arrangement. Confirm those supplied parts before adding a separate pair of supports. Keep the full lower assembly on the quote so every component has an identified connection.
Check the floor connection before assembling the seat
Compare the selected bracket with the existing floor mounting positions and physical side. Photograph any earlier adapters or floor alterations. Establish the correct vehicle application before completing the upper assembly. Use the current instructions for each component.
Planted’s instructions distinguish base-mounted and side-mounted seats, with separate sliding and fixed arrangements. Trial the vehicle bracket against the floor before assembling the package outside the car. Check the floor hardware against the actual bracket and instructions. Ask for a review if the existing connections differ from the named application.
Keep the seat, bracket, runner and supports together during the trial. Confirm access to every required connection before final tightening. Follow the component instructions for the assembly order and hardware.
- Actual chassis, original market and physical side.
- Current seat and runner references with their fixing drawings.
- Supplied bracket pattern, stays and hardware.
- Driver reach and cabin clearance with the complete assembly.
Include the powertrain and original seat specification
The Japanese third-generation launch range included petrol manuals and a hybrid with a seven-speed dual-clutch transmission. Describe the actual gearbox and powertrain on the enquiry. Include the full chassis code for a GP5 application. Check another hybrid code against its own named fitting information.
Honda also described rotating-front-passenger-seat versions in its Japanese launch information. Identify any adapted or rotating seat before requesting replacement fittings. Photograph its lower connections and seat identification. Its particular assembly needs a separate application check.
List the features and adjustment you want from the replacement. Confirm the exact seat specification and its connections with the lower package. Keep photographs of the original seating arrangement to compare the driving position.
Trial the position with the controls and rear cabin
Check full clutch-pedal travel in a manual car and the actual pedal reach for every driver. Include the gear lever or selector through the movement you need. Trial steering reach with the seat at the chosen height and angle. Measure the complete seat and lower assembly in the car.
Cameron would check the shoulder and hip area beside the door and centre console. Include the recline control and any armrests through their intended movement. Open and close the door during the trial. Check buckle access with the driver seated.
If you use the rear seating area, trial the entry and load access you need with the front seat in position. Compare that movement with the support chosen for the driver. A shared car also needs the passenger seat and each regular driver included in the final check.
Plan the restraint arrangement with the seat package
Show the existing buckle and its attachment when asking about the car’s belt arrangement. Check the route beside the replacement seat and access in the finished position. Identify the attachment hardware required for that actual assembly.
For harnesses, include the exact seat, intended use and proposed attachment arrangement. Confirm the mounting points for the installation. We can discuss the harness type and fittings with the rest of the package.
Send the car details and complete fitting shortlist
Include the chassis identification, model year, original market, steering side and powertrain. Mark the physical seating position you want to change. Add photographs of the current seat label and lower fittings. Show any existing adapters or unusual floor connections.
List the full references for components you already have and the seat version you want to try. Include the Planted pattern option or full BRIDE suffix under consideration. Describe how much adjustment and rear-cabin access the finished car needs.
Garreth would use those details to compare the seating choices with the driver. Keep the support and entry requirements beside the fitting shortlist. We can then prepare a package enquiry for the particular Fit or Jazz.
Common questions
The Honda application row used here names GK3, GK4, GK5, GK6 and GP5 from September 2013. Confirm the exact chassis and supplied package.
Include the chassis code, original market and powertrain with the model year so the actual application can be checked.
That is the title of the linked shop products. Quote another code from the named manufacturer row with the full side and rail-type reference for a package check.
Planted lists SB364 for Honda Fit third generation, 2013 onwards. Include the actual market and floor details with the fitting enquiry.
SB364DR is the Standard physical-left bracket; Planted calls it Driver / Left on its US steering basis.
SB364PA is the Standard physical-right bracket; Planted calls it Passenger / Right on its US steering basis.
The current manufacturer variants use COBRA-SB364DR for left and COBRA-SB364PA for right. Confirm that pattern separately from the shop seating-side selection.
Standard includes the RECARO runner pattern. Alternate exchanges it for Cobra and Scheel-Mann patterns; compare the exact runner drawing with the supplied bracket.
Planted says its narrow Cobra pattern is included on both versions. Wide Cobra and Scheel-Mann runners use the Alternate pattern.
Send the actual chassis, original market, floor photographs and measurements for a check. Planted has not verified every RHD or international model.
H205 identifies physical right in this application; include the complete rail-type suffix.
H206 identifies physical left in this application; include the complete rail-type suffix.
BRIDE describes FX as a fixed competition arrangement with aluminium side stays. Confirm that position and supplied parts with the exact bucket.
XL names ZIEG IV Wide and ZETA III Type-XL.
The current BRIDE XR information names STRADIA II Wide, formerly called STRADIA II Type-XL.
The shortlist is EUROSTER II Fujiwara Edition, EUROSTER II CRUZ and edirb 054, for discussion with the named MO families and exact-version check.
BRIDE includes Sprint in its MO information. Match the current seat version, fixing drawing and supplied rail arrangement.
Check the parts supplied with the complete BRIDE reference and the seat requirements before adding another runner. FX has a fixed competition arrangement.
Specify a complete arrangement with each connection checked. Planted notes that BRIDE vehicle-specific sliders generally need changes for universal use, so include the actual parts for review.
Check the seat instructions and lower assembly. Confirm any stays already supplied with the chosen BRIDE reference before adding supports.
Measure the actual seat and complete lower assembly in the car with the driver.
Identify the adapted or rotating seat and photograph its lower fittings for a separate application check.
Trial full clutch-pedal movement, gear-lever reach and steering position with the actual driver and completed lower assembly.
Include the exact seat, intended use and proposed attachment points. We can then discuss the harness and fittings for that installation.
They describe other generations with their own fitting applications. Identify the actual chassis before choosing the guide and parts.
Garreth’s top tip
Garreth would settle the seat support and daily adjustment with the driver before choosing the finish. Try entry and rear-cabin access during that comparison. Keep the exact seat version with the fitting shortlist.
Cameron’s fitting view
Cameron would keep the physical-side reference and original market beside the complete lower assembly. Confirm the Planted runner pattern or BRIDE rail type with the current seat drawing. Trial every connection and the driving position before completing the installation.
Plan your Honda Fit / Jazz GK seat change
Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Sources: Honda third-generation Fit launch; BRIDE Honda application table dated 4 February 2025, linked rail specifications and seat matching guidance; Planted left and right applications, FAQ and installation instructions; current linked shop listings. Confirm the actual chassis, seat version and supplied components with the fitting enquiry.

![Planted Technology Honda Fit [3rd Generation] - (2013+) Seat Bracket](https://www.sportseats4u.co.uk/wp-content/uploads/sites/2/2026/08/SB364PA-1-300x300.jpg)








